SSA149

SSA 149 SERIES 2 TIER 3mm LED ASSEMBLY The SSA-149 series is a family of display devices using a Black Nylon 6 UL-94VO rated housing to mount one or two 3mm LEDs at right angles to a PCB. The pin out is in line on 0.1”centres . • Accurate alignment of LEDs. • Unique Baseplate for accurate lead positioning. • Matched LEDs. • + 50 Deg Viewing Angle. • Bi-Colour, Polarity and 2mA LEDs available. • Low profile non baseplate version available. • 9 way assembly SSA149/9 MECHANICAL DATA 2.6 2.54 8.26 This component is RoHS compliant 4.32 Pb X 3.2 11.16 5.08 Y 3.54 3.68+0.25-0.25 BI-COLOUR RED ANODE LEFT + 0.5 SQUARE 2.54 4.45 2.54 BEDFORD OPTO TECHNOLOGY LTD 1,BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk ISS C 10.3.06 ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter Forward Current Power Dissipation RED GREEN 30mA 100mW Red 15mA 40mW 10μA -40°C to +85°C -40°C to 100°C 260°C Green 30mA 100mW 10μA -40°C to +85°C -40°C to 100°C 260°C Yellow 20mA 60mW 10μA -40°C to +85°C -40°C to 100°C 260°C SSA 149 Orange 30mA 100mW 10μA -40°C to +85°C -40°C to 100°C 260°C Reverse Current @ 100μA 5V Operating Temperature Storage Temperature Lead Soldering Temperature for 5sec (2.0mm from Body) -40°C to +85°C -40°C to 100°C 260°C OPTO ELECTRONIC DATA (Ta = 25oC) COLOUR Lumenous Intensity If = 10mA mcd Peak Wavelength nm 697 585 565 635 630 Viewing Angle Degrees 50 50 50 50 200 Forward Voltage If = 20mA volts 1.7 1.7 1.7 2.8 1.7 2.8 2.0 2.8 2.1 2.8 RED min typ min typ min typ max min typ max Min Typ Max Min Typ Max 2.0 4.2 7.5 12 9.0 15 7.5 12 2.2 @20mA 4.8 @20mA 2.2 @20mA 4.8 @20mA YELLOW GREEN ORANGE RED GREEN BICOLOUR 565 200 ORDERING INFORMATION Dual LED - SSA149XY X = Top LED Y = Bottom LED Indicate colour by using R = Red Y = Yellow G = Green O=Orange BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk This component is RoHS compliant Pb ISS C 10.3.06