SSA187

SSA 187/L SERIES 3 TIER 3mm LED ASSEMBLY The SSA 187 series is a family of display devices using a Black Nylon 6 UL-94VO rated housing to mount three 3mm LEDs at right angles to a PCB. The pin out is in line on 0.1” . In any one batch the LEDs are lumenous intensity matched. • Accurate alignment of LEDs. • Low current and high brightness available. • Unique Baseplate for accurate lead positioning. • Matched LEDs. • Blue also available. • Near equivalent to Dialight 564-0X20-XXX MECHANICAL DATA This component is RoHS compliant 1.2 12.5 4.9 6.0 X Pb Ø2.80 5.08 15.3 5.08 Z RED ANODE FOR RED/GREEN BI-COLOUR Y 2.57 3.3 7.25 5.08 2.54 3.2 2.54 + 0.5 SQUARE BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk PAGE1 OF 3 ISS C 14.3.06 ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter Forward Current Power Dissipation Reverse Voltage volts Operating Temperature Storage Temperature Lead Soldering Temperature for 5sec (2.0mm from Body) Red 30mA 100mW 6 Soft 30mA 100mW 6 Yellow 30mA 100mW 6 Green 30mA 100mW 6 Pure 30mA 100mW 6 SSA 187 Red 3omA 100mW 10μA -40°C to +100°C -55°C to 100°C 260°C OPTO ELECTRONIC DATA (Ta = 25oC) COLOUR Lumenous Intensity If = 10mA mcd Peak Wavelength nm 635 Viewing Angle Degrees 60 Forward Voltage If = 20mA volts RED min typ Min Typ min typ min typ max min typ max Min Typ Max Min Typ Max 6.3 10 1.6 4.0 6.3 10 6.3 10 1.6 3.5 2.2 @20mA 4.8 @20mA 2.2 @20mA 4.8 @20mA 2.0 SOFT ORANGE This component is RoHS compliant Pb 605 585 565 555 630 60 60 60 60 200 2.4 YELLOW GREEN PURE GREEN RED 2.4 2.4 3.0 2.4 3.0 2.0 2.8 2.1 2.8 GREEN BI- 565 200 ORDERING INFORMATION SSA187XYZ X = Top LED Indicate colour by using R = Red B = Blank Y = Middle LED Z = Bottom LED O= Orange Y = Yellow G = Green PG= Pure Green BC=Red/Green Bi-colour BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk PAGE 2 OF 3 ISS C 14.3.06 SSA 187L LOW CURRENT VERSIONS ABSOLUTE MAXIMUM RATINGS (TA = 25OC) Parameter Forward Current mA Power Dissipation Reverse Voltage volts Operating Temperature Storage Temperature Lead Soldering Temperature Red 7.0 20mW 6 Green 7.0 20mW 6 -40°C to +100°C -55°C to 100°C 260°C Yellow 7.0 20mW 6 This component is RoHS compliant Pb OPTO ELECTRONIC DATA (Ta = 25oC) COLOUR Lumenous Intensity If = 2mA mcd Peak Wavelength nm 635 585 565 - Viewing Angle Degrees 50 50 50 - Forward Voltage If = 2mA volts RED min typ min typ min typ max 1.0 2.0 1.0 2.0 1.0 2.0 1.9 YELLOW 2.4 GREEN 1.9 2.4 ORDERING INFORMATION SSA187LXYZ X = Top LED R = Red B = Blank Y = Middle LED Y = Yellow G = Green Z = Bottom LED Indicate colour by using BEDFORD OPTO TECHNOLOGY LTD 1 BIGGAR BUSINESS PARK, BIGGAR,LANARKSHIRE, ML12 6FX Tel: +44 (0) 1899 221221 Fax: +44 (0) 1899 221009 Website: bot.co.uk E-mail: bill@bot.co.uk ISS C 14.3.06 PAGE 3 OF 3