0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
B1-053R3D

B1-053R3D

  • 厂商:

    BOTHHAND(帛汉)

  • 封装:

  • 描述:

    B1-053R3D - 1 Watt Isolated DC-DC Converter Single / Dual / Dual Separate Output - Bothhand USA, LP.

  • 数据手册
  • 价格&库存
B1-053R3D 数据手册
B1 1. Features : DIL Series 1 Watt Isolated DC-DC Converter Single / Dual / Dual Separate Output ! 14 Pin DIL Package ! Low Ripple and Noise ! Input / Output Isolation 1K Vdc or 3K Vdc ! 100 % Burn-In ! Input Filter with Internal Capacitor ! Custom Design Available 2. Absolute maximum ratings: ( Exceeding these values may damage the module. These are not continuous operating ratings ) Parameter Condition 5V Input Model Input Absolute Voltage Range 12V Input Model 24V Input Model Max. Output power Output Short circuit duration Operating temperature Storage temperature Output Full Load Min. -0.7 -0.7 -0.7 -----40 -55 Typ. 5 12 24 --------Max. 7.5 15 30 1 1.0 +85 +105 W Second ℃ Vdc Unit 3. Nominal Input / Output Electrical Specifications : ( Specifications typical at Ta = +25℃, nominal input voltage, rated output current unless otherwise noted ) Parameter Condition 5V Input Model Input Voltage Range 12V Input Model 24V Input Model Output Voltage Accuracy Output Voltage Balance Switching Frequency Temperature Coefficient Isolation Voltage Isolation Resistance Isolation Capacitance Standard Series High Isolation Series 500 Vdc 1 KHz / 250 mV rms Nominal Input Dual Output same Load Nominal Input Min. 4.5 10.8 21.6 --------1000 3000 1000 ----Typ. 5 12 24 ----110 ± 0.01 ------30 --Max. 5.5 13.2 26.4 ± 5.0 ± 1.0 --± 0.02 --------1.3 MΩ pF % KHz %/ ℃ Vdc % Vdc Unit Max. Line Regulation (Per 1.0 % change in input change) BOTHHAND USA. http://www.bothhand.com B1 - DIL Series 1 Watt Isolated DC-DC Converter Single / Dual / Dual Separate Output 4. Model Selection Guide: 4.1. 1K Vdc Isolation - Single output ( Specifications typical at Ta = +25 ℃, Nominal input voltage, Rated output current unless otherwise noted ) Input Bothhand Voltage Model No. (Vdc) B1-0505DS 5 B1-0512DS B1-1205DS 12 B1-1212DS B1-243R3DS B1-2405DS B1-2412DS B1-xxxxDS Notes: 1. 2. Standard output Voltage is 3.3V, 5V, 12V, 15V, B1-xxxxDS is for Customer Design. 24 12.0 3.3 5.0 12.0 84 303 200 84 18 5 4 4 104 56 54 55 100 50 60 100 ±8 ±8 ±8 ±8 80 74 77 76 12.0 5.0 84 200 28 18 254 105 100 60 ±8 ±8 79 79 (Vdc) 5.0 (mA) Max. 200 (mA) Typ. 30 (mA) Typ. 253 (mV) Max. 60 (%) Max. ±8 79 Voltage Current @ No Load @ Max. Load Ripple Regulation (%) Typ. Output Output Input Current Input Current Output Load Efficiency Load regulation is for output current change from 20 % to 100 % Max. Load. Mechanical Dimension: Pin 1 2 3 4 5 6 7 1K Vdc - Single -Vin +Vin ----Vo (-) --Vo (+) NC --- Pin 14 13 12 11 10 9 8 Units : mm ( inch ) Tolerance : .xx ± 0.25 ( ± 0.01 ) Note:” --- “ means Omitted BOTHHAND USA. http://www.bothhand.com B1 - DIL Series 1 Watt Isolated DC-DC Converter Single / Dual / Dual Separate Output 4.2. 1K Vdc Isolation - Dual output ( Specifications typical at Ta = +25 ℃, Nominal input voltage, Rated output current unless otherwise noted ) Input Bothhand Voltage Model No. (Vdc) B1-053R3D B1-0505D 5 B1-0512D B1-0515D B1-1205D 12 B1-1212D B1-243R3D B1-2405D B1-2412D B1-xxxxD Notes: 1. 2. Standard output Voltage is ±3.3V, ±5V, ±12V, ±15V, B1-xxxxD is for Customer Design. 24 ± 12.0 ± 3.3 ± 5.0 ± 12.0 ± 42 ± 150 ± 100 ± 42 18 5 4 4 104 56 55 55 100 60 70 100 ±8 ±8 ±8 ±8 80 74 76 76 ± 12.0 ± 15.0 ± 5.0 ± 42 ± 34 ± 100 28 28 18 253 250 104 100 120 70 ±8 ±8 ±8 79 80 80 (Vdc) ± 3.3 ± 5.0 (mA) Max. ± 150 ± 100 (mA) Typ. 30 30 (mA) Typ. 274 263 (mV) Max. 60 70 (%) Max. ± 12 ± 10 73 76 Voltage Current @ No Load @ Max. Load Ripple Regulation (%) Typ. Output Output Input Current Input Current Output Load Efficiency Load regulation is for output current change from 20 % to 100 % Max. Load. Mechanical Dimension: Pin 1 2 3 4 5 6 7 Units : mm ( inch ) Tolerance : .xx ± 0.25 ( ± 0.01 ) 1K Vdc – Dual -Vin +Vin ----Vo (-) --Vo (+) NC Common Pin 14 13 12 11 10 9 8 Note:” --- “ means Omitted BOTHHAND USA. http://www.bothhand.com B1 - DIL Series 1 Watt Isolated DC-DC Converter Single / Dual / Dual Separate Output 4.3. 1K Vdc Isolation - Dual separate output ( Specifications typical at Ta = +25 ℃, Nominal input voltage, Rated output current unless otherwise noted ) Input Bothhand Voltage Model No. (Vdc) B1-0505D01 5 B1-0515D01 B1-1205D01 B1-1212D01 B1-1215D01 B1-2405D01 B1-xxxxDxx Notes: 1. 2. B1-xxxxDxx is for Customer Design. Load regulation is for output current change from 20 % to 100 % Max. Load. 24 12 5.0 5.0 5.0 5.0 5.0 15.0 5.0 12.0 15.0 5.0 100 100 100 100 100 33 100 42 33 100 28 18 18 13 5 250 107 104 106 54 75 70 75 75 70 ±8 ±8 ±8 ±8 ±8 80 78 80 78 76 (Vdc) 5.0 5.0 (mA) Max. 100 100 (mA) Typ. 30 (mA) Typ. 263 (mV) Max. 70 (%) Max. ± 10 76 Voltage Current @ No Load @ Max. Load Ripple Regulation (%) Typ. Output Output Input Current Input Current Output Load Efficiency Mechanical Dimension: Pin 1 2 3 4 5 6 7 1K Vdc - Dual Separate -Vin +Vin ----Vo1 (+) Vo1 (-) Vo2 (+) NC Vo2 (-) Pin 14 13 12 11 10 9 8 Units : mm ( inch ) Tolerance : .xx ± 0.25 ( ± 0.01 ) Note:” --- “ means Omitted BOTHHAND USA. http://www.bothhand.com B1 - DIL Series 1 Watt Isolated DC-DC Converter Single / Dual / Dual Separate Output 4.4. 3K Vdc Isolation - Single output ( Specifications typical at Ta = +25 ℃, Nominal input voltage, Rated output current unless otherwise noted ) Input Bothhand Voltage Model No. (Vdc) B1-0505DSH B1-0512DSH B1-0515DSH B1-1205DSH 12 B1-1212DSH B1-2405DSH B1-2412DSH B1-2415DSH B1-xxxxDSH 24 12.0 5.0 12.0 15.0 84 200 84 67 18 5 4 4 104 54 55 55 100 60 100 120 ±8 ±8 ±8 ±8 80 77 76 76 5 (Vdc) 5.0 12.0 15.0 5.0 (mA) Max. 200 84 67 200 (mA) Typ. 30 28 28 18 (mA) Typ. 253 254 250 105 (mV) Max. 60 100 120 60 (%) Max. ±8 ±8 ±8 ±8 79 79 80 79 Voltage Current @ No Load @ Max. Load Ripple Regulation (%) Typ. Output Output Input Current Input Current Output Load Efficiency Notes: 1. 2. . Standard output Voltage is 5V, 12V, 15V, B1-xxxxDSH is for Customer Design. Load regulation is for output current change from 20 % to 100 % Max. Load. Mechanical Dimension: Pin 1 2 3 4 5 6 7 Units : mm ( inch ) Tolerance : .xx ± 0.25 ( ± 0.01 ) 3K Vdc - Single -Vin +Vin Pin 14 13 ----Vo (-) --NC Vo (+) 12 11 10 9 8 Note:” --- “ means Omitted BOTHHAND USA. http://www.bothhand.com B1 - DIL Series 1 Watt Isolated DC-DC Converter Single / Dual / Dual Separate Output 4.5. 3K Vdc Isolation - Dual output ( Specifications typical at Ta = +25 ℃, Nominal input voltage, Rated output current unless otherwise noted ) Input Bothhand Voltage Voltage Model No. (Vdc) B1-053R3DH 5 B1-0505DH B1-1205DH 12 B1-1212DH B1-2405DH 24 B1-2412DH B1-xxxxDH ± 12.0 ± 42 4 55 100 ±8 76 ± 12.0 ± 5.0 ± 42 ± 100 18 5 104 55 100 70 ±8 ±8 80 76 ± 5.0 ± 5.0 ± 100 ± 100 30 18 263 104 70 70 ± 10 ±8 76 80 (Vdc) ± 3.3 (mA) Max. ± 150 (mA) Typ. 30 (mA) Typ. 274 (mV) Max. 60 (%) Max. ± 12 73 Current @ No Load @ Max. Load Ripple Regulation (%) Typ. Output Output Input Current Input Current Output Load Efficiency Notes: 1. 2. . Standard output Voltage is ±3.3V, ±5V, ±12V, ±15V, B1-xxxxDH is for Customer Design. Load regulation is for output current change from 20 % to 100 % Max. Load. Mechanical Dimension: Pin 1 2 3 4 5 6 7 Units : mm ( inch ) Tolerance : .xx ± 0.25 ( ± 0.01 ) 3K Vdc - Dual -Vin +Vin Pin 14 13 ----Vo (-) Common NC Vo (+) 12 11 10 9 8 Note:” --- “ means Omitted BOTHHAND USA. http://www.bothhand.com
B1-053R3D 价格&库存

很抱歉,暂时无法提供与“B1-053R3D”相匹配的价格&库存,您可以联系我们找货

免费人工找货