B1212S-1WR2

B_S-1WR2 Series 4 pin SIP Package, 1 Watt, Isolated, Unrgulated Features  4pin SIP Package with Industry-Standard Footprint  Input / Output Isolation Voltage: 1.5kVDC  High Efficiency  Lead Free Design, RoHS Compliant  Operating temperature: -40°C to +105°C  Meet Safety Standard / Approval: IEC / EN60950-1 Applications These converters are well suitable for battery operated equipment, measurement equipment, telecom, wireless network, Industry control system, everywhere where isolated, tightly regulated voltages and compact size are required. Technical Specification All specifications are typical at nominal input, full load and 25°C unless otherwise stated. Output Voltage (V) Output Current (mA) (1) Full Load 3.3 300 B0503S-1WR2 5 3.3 200 300 B0505S-1WR2 5 B0509S-1WR2 9 12 Model Number Input Voltage Range(V) B0303S-1WR2 2.97-3.63 Nominal:3.3 B0305S-1WR2 B0512S-1WR2 4.5-5.5 Nominal:5 Input Current (mA) Typ. No Load Full Load Eff .(%) (2) Typ. Capacitive Load, max. (3) (uF) 405 74 68 404 264 75 75 47 68 200 260 77 47 110 248 80 33 246 22 246 81 81 35 28 B0515S-1WR2 15 83 67 B0524S-1WR2 24 42 246 81 10 B1203S-1WR2 3.3 300 109 76 68 5 200 107 78 47 9 110 107 78 33 B1212S-1WR2 12 104 15 104 80 80 22 B1215S-1WR2 83 67 B1503S-1WR2 3.3 300 87 76 68 5 200 85 78 47 85 78 33 83 22 83 80 80 B1205S-1WR2 B1209S-1WR2 10.8-13.2 Nominal:12 B1505S-1WR2 B1509S-1WR2 13.5-16.5 Nominal:15 9 110 17 15 22 22 B1512S-1WR2 12 B1515S-1WR2 15 83 67 B2403S-1WR2 3.3 300 54 77 68 B2405S-1WR2 5 200 53 79 47 B2409S-1WR2 9 110 52 80 33 12 51 22 51 81 81 51 78 22 B2412S-1WR2 21.6-26.4 Nominal:24 B2415S-1WR2 15 83 67 B2424S-1WR2 24 42 E-mail: bothhand_sales@bothhandww.com 8 https://www.bothhandww.com Rev: A0 22 22 Page 1 of 6 Input Specifications 3.3V nominal input 2.97-3.63V 5V nominal input 4.5-5.5V 12V nominal input 10.8-13.2V 15V nominal input 13.5-16.5V 24V nominal input 21.6-26.4V Input filter Capacitor Environmental Specifications -40°C to +105°C Operating ambient temperature Maximum case temperature +125°C Storage temperature range -55°C to +125°C Relative humidity 95% RH max. Output Specifications Output power 1Watts max. Voltage accuracy Nominal Vin and full load 3.3Vdc 5Vdc 9Vdc 12Vdc 15Vdc 24Vdc Voltage balance output 3.135-3.399V 4.75-5.15V 8.73-9.18V 11.64-12.24V 14.55-15.30V 23.52-24.36V ±1% max. Minimum load Line regulation Load regulation 10% load of full load For Vin charge of 1% Nominal Vin and 10%-100% load 3.3Vdc 5Vdc 9Vdc 12Vdc 15Vdc 24Vdc ±1.2% Typ. 15% Typ. 13% Typ. 9% Typ. 8% Typ. 7% Typ. 6% Typ. 50mVp-p Typ. 120mVp-p Max. See table Ripple and Noise (20MHz Bandwidth) Maximum capacitive load Output short circuit protection B03xxS-1WR2 B24xxS-1WR2 Other models 3S Max. Continuous, Automatic recovery Temperature coefficient ±0.03%/°C Typ. General Specifications Efficiency Nominal input and full load Isolation voltage Input to output Isolation resistance 500VDC See table 1500VDC (60 second) 1000MΩ min. Isolation capacitance 30pF typ. 150kHz typ. Switching frequency 300kHz max. Reliability, calculated MTBF E-mail: bothhand_sales@bothhandww.com 2×10 6 Hrs https://www.bothhandww.com Rev: A0 Page 2 of 6 Physical Specifications Case material Plastic (UL94 V-0) Potting material PU (UL94 V-0) Dimensions 11.6 × 10.1 × 6.0 m m Weight 1.5g Typ. Note 1. Io below this value will not damage these converters, however, they may not meet all listed specifications. 2. Typical value, tested at nominal input and full load. 3. For each output. 4. Specifications subject to change without notice. 5. This series of products do not support CC mode, CR mode is recommended. 6. In case of long input lines or hot plug-in requirements, we recommended to use an external low ESR capacitor (22uF) near to the converter’s input pins. Power Derating Curve Power Derating Curve Output Power (%) 120 100 80 60 40 20 0 85 -40 -20 0 20 40 60 80 105 100 120 Ambient Temp.TA () Mechanical Dimensions Pin Assignment Pin Single 1 -Vin 2 +Vin 3 -Vout 4 +Vout Unit: mm (inch) Pin section tolerances:±0.1(±0.004) General tolerances:±0.5(±0.02) E-mail: bothhand_sales@bothhandww.com https://www.bothhandww.com Rev: A0 Page 3 of 6 Test Configurations All specifications are typical at nominal input, full load and 25°C unless otherwise stated. A A DC Power Supply DC/DC converter V V Load ◎DC Power Supply: It offers a wide voltage and current range precisely. ◎Current meter (A): Accuracy200μA ~ 200mA 4 ranges+(0.2% rdg + 2 digits) 2000mA ~ 20A 2 ranges+(0.3% rdg + 2 digits). ◎Voltage meter (V): Accuracy+(0.03% rdg + 4 digits). ◎Load: At full load. ◎Wires: The resistance of the wires must be small. 1. Input voltage range: Narrow input voltage range（±10%）、wide input voltage range (2:1 and 4:1）。 EX: Narrow input voltage range（±10%） 5V nominal input 4.5~5.5V 12V nominal input   10.8~13.2V 24V nominal input   21.6~26.4V Wide input voltage range 2:1 5V nominal input  4.5~9V 12V nominal input 9~18V 24V nominal input   18~36V 48V nominal input    36~75V Wide input voltage range 4:1 (W) 24V nominal input    9~36 V 48V nominal input   18~75V 2. Input power : Pin = Vin x Iin Vin：Input voltage Iin：Input current Pout = Vout x Iout Vout：Output voltage Iout：Output current 3. Output power : 4. Efficiency : Efficiency = Pout Pin x100% Pout: Output power Pin: Input power 5. Voltage accuracy: │Vout-Vout(nominal)│ Vout x100% Vout：Output voltage Vout(nominal)：Nominal output voltage 6. Line regulation: E-mail: bothhand_sales@bothhandww.com https://www.bothhandww.com Rev: A0 Page 4 of 6 Narrow input voltage range（±10%）and unregulated output voltage series. Line regulation= Ä Vout Ä Vin Ä Vout = Vout(+10%)-Vout(-10%) x100% Vout Vout(+10%)：Output voltage at Vin = 1.1xVin(nominal)&full load Vout(-10%)：Output voltage at Vin = 0.9xVin(nominal)&full load Vout：Output voltage at Vin = Vin(nominal)&full load Ä Vin = Vin(+10%)-Vin(-10%) x100% Vin(nominal) Vin(+10%)：Input voltage = 1.1xVin(nominal) Vin(-10%)：Input voltage = 0.9xVin(nominal) Vin(nominal)：Nominal Input voltage 7. Load regulation : │Vout(FL)-Vout(NL)│ x100% Vout(FL) Vout(FL): Output voltage at full load Vout(NL): Output voltage at 25% full load or 10% full load 8. Ripple and Noise: as shown below. The bandwidth is 0-20MHz. Noise Ripple&Noise Ripple Output Ripple&Noise measurement test circuit: as shown below. E-mail: bothhand_sales@bothhandww.com https://www.bothhandww.com Rev: A0 Page 5 of 6 Copper strip DC/DC converter Co Load Oscilloscope Copper strip Co: usually 0.47uF. 9. Temperature derating curve: The DC-DC converter will operate over a wider temperature range if less power Output Power (%) is drawn from the output and the device is already running. The temperature derating curve shows the operating power-temperature range. As shown below. 120 100 80 60 40 20 0 85 -40 -20 0 20 40 60 80 105 100 120 Ambient Temp.TA (℃) 10. Switching frequency: The nominal operating frequency of the DC-DC converters. 11. Input to output isolation: The dielectric breakdown strength test between input and output circuits. This is the isolation voltage the device is capable of withstanding for a specified time, usually 1 second or 1 minute. 12. Input souce impedance: The power module should be connected to low ac-impedance input souce. Highly inductive souce impedances can affect the stability of the power module. In applications where power is supplied over long lines and output loading is high , it maybe necessary to use a capacitor at the input to ensure startup. Capacitor mounted close to the power module helps ensure stability of the unit , it is commended to use a good quality low Equivalent Series Resistance ( ESR < 0.1Ω at 100KHz ) capacitor of a 22uF for the power module. DC Power Supply Cin DC/DC converter E-mail: bothhand_sales@bothhandww.com Load https://www.bothhandww.com Rev: A0 Page 6 of 6