BA-2405S1

BA - SIL Series 1. Features : 0.5 to 1 Watt Isolated DC-DC Converter Single Output ! 4 Pin SIL Package ! Low Ripple and Noise ! Input / Output Isolation 1000 Vdc ! 100 % Burn-In ! Input Filter with Internal Capacitor ! Custom Design Available 2. Absolute maximum ratings： ( Exceeding these values may damage the module. These are not continuous operating ratings ) Parameter Condition 5V Input Model Min. -0.7 -0.7 -0.7 ----- Typ. 5 12 24 --------- Max. 7.5 15 30 1.0 1.0 +85 +105 Unit Input Absolute Voltage Range 12V Input Model 24V Input Model Vdc Max. Output power Output Short circuit duration Operating temperature Storage temperature Output Full Load W Second ℃ -40 -55 3. Nominal Input / Output Electrical Specifications : ( Specifications typical at Ta = +25℃, nominal input voltage, rated output current unless otherwise noted ) Parameter Condition 5V Input Model Input Voltage Range 12V Input Model 24V Input Model Output Voltage Accuracy Voltage Balance (Dual Outputs ) Nominal Input Switching Frequency Temperature Coefficient Isolation Voltage Isolation Resistance Isolation Capacitance 60 Seconds / 0.5mA 500 Vdc 1 KHz / 250 mV rms ----1000 1000 ----100 ± 0.01 ----40 ----± 0.02 ------1.3 KHz %/ ℃ Vdc MΩ pF % Min. 4.5 10.8 21.6 ----Typ. 5 12 24 ----Max. 5.5 13.2 26.4 ± 5.0 % ± 1.0 Vdc Unit Max. Line Regulation (Per 1.0 % change in input change) BOTHHAND USA. http://www.bothhand.com BA - SIL Series 4. Single Output Selection Guide： Input Bothhand Voltage Model No. (Vdc) (Vdc) (mA) Max (mA) Typ. Voltage Current @ No Load Output Output 0.5 to 1 Watt Isolated DC-DC Converter Single Output ( Specifications typical at Ta = +25 ℃, Nominal input voltage, Rated output current unless otherwise noted ) Input Current Input Current @ Max. Load (mA) Typ. Output Ripple (mV) Max. Load Efficiency Regulation (%) Typ. (%) Max. 0.5 W Single Output Series： BA-053R3S BA-0505S BA-0512S BA-1205S 12 BA-1212S BA-2405S 24 12.0 5.0 42 100 18 5 55 29 100 60 ±8 ±8 76 72 5 3.3 5.0 12.0 5.0 150 100 42 100 28 28 28 18 133 135 133 56 60 60 100 60 ± 12 ± 10 ±8 ±8 74 74 76 74 1.0 W Single Output Series： BA-053R3S1 BA-0505S1 BA-0512S1 BA-1205S1 12 BA-1212S1 BA-2405S1 BA-xxxxS1 Notes： 1. 2. Standard output voltage is 3.3V, 5V, 9V, 12V, 15V, BA-xxxxS1 is for Customer Design. 24 12.0 5.0 83 200 14 5 105 54 100 60 ±8 ±8 79 77 5 3.3 5.0 12.0 5.0 300 200 100 200 30 30 30 14 267 253 307 105 60 60 100 60 ± 10 ±8 ±8 ±8 74 79 78 79 Load regulation is for Each output current change from 20 % to 100 % Max. Load. Mechanical Dimension： Dimension Pin 1 2 3 4 Units : mm ( inch ) Tolerance : .xx ± 0.25 ( ± 0.01 ) 1K Vdc - Single -Vin +Vin Vo (-) Vo (+) Note：” --- “ means Omitted BOTHHAND USA. http://www.bothhand.com