1.5SMBJ33CA

CO M G E & PL I AN N FR T* EE ** HS LO Ro HA Features Applications n RoHS compliant* and halogen free** n IEC 61000-4-2 ESD (Min. Level 4) n DO-214AA (SMB) package n IEC 61000-4-4 EFT n Standoff Voltage: 12 to 85 volts n IEC 61000-4-5 Surge n Power Dissipation: 1500 watts n Typical temperature coefficient: 1.5SMBJ Transient Voltage Suppressor Diode Series *R oH S CO M PL IA NT DVBR = 0.1 % x VBR @ 25 °C x DT General Information Additional Information Click these links for more information: AD FR EE Manufacturers of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. LE Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AA (SMB) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 12 V up to 85 V and Breakdown Voltage up to 104 V. Typical fast response times are less than 1.0 picosecond from 0 V to Minimum Breakdown Voltage. PRODUCT TECHNICAL INVENTORY SAMPLES LIBRARY Agency Recognition Bourns Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Ro VER LEA HS SI D F CO ON RE M SA E PL R IA E NT * ® CONTACT Description UL File Number: E153537 Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Symbol Value Unit PPK 1500 Watts IFSM 100 Amps TJ -55 to +150 °C -55 to +150 °C Operating Temperature Range Storage Temperature Range 1. 2. 3. TSTG Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 8 mm x 8 mm copper pad on each terminal. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com 1.5SMBJ 12 CA - H Package 1.5SMBJ = SMB/DO-214AA Working Peak Reverse Voltage 12 = 12 VRWM (Volts) Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (blank) = 13 inch reel -H = 7 inch reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  1.5SMBJ Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Maximum Reverse Leakage @ VRWM Max. @ IT (mA) VRWM (V) IR (μA) VC (V) Breakdown Voltage VBR (Volts) Marking Min. Maximum Clamping Voltage @ Ipp Working Peak Reverse Voltage (10/1000 µs) Maximum Maximum Maximum Clamping Peak Peak Pulse Voltage Pulse Current @ Ipp Current (10/1000 µs) (8/20 µs) (8/20 µs) IPP (A) VC (V) IPP (A) Part No. Marking Part No. 1.5SMBJ12A GEE 1.5SMBJ12CA BEE 13.30 14.70 1 12.0 1.0 19.9 75.4 25.9 377.0 1.5SMBJ13A GEG 1.5SMBJ13CA BEG 14.40 15.90 1 13.0 1.0 21.5 69.8 28.0 349.0 1.5SMBJ14A GEK 1.5SMBJ14CA BEK 15.60 17.20 1 14.0 1.0 23.2 64.7 30.2 323.5 1.5SMBJ15A GEM 1.5SMBJ15CA BEM 16.70 18.50 1 15.0 1.0 24.4 61.5 31.7 307.5 1.5SMBJ16A GEP 1.5SMBJ16CA BEP 17.80 19.70 1 16.0 1.0 26.0 57.7 33.8 288.5 1.5SMBJ17A GER 1.5SMBJ17CA BER 18.90 20.90 1 17.0 1.0 27.6 54.4 35.9 272.0 1.5SMBJ18A GET 1.5SMBJ18CA BET 20.00 22.10 1 18.0 1.0 29.2 51.4 38.0 257.0 1.5SMBJ20A GEV 1.5SMBJ20CA BEV 22.20 24.50 1 20.0 1.0 32.4 46.3 42.1 231.5 1.5SMBJ22A GEX 1.5SMBJ22CA BEX 24.40 26.90 1 22.0 1.0 35.5 42.3 46.2 211.5 1.5SMBJ24A GEZ 1.5SMBJ24CA BEZ 26.70 29.50 1 24.0 1.0 38.9 38.6 50.6 193.0 1.5SMBJ26A GFE 1.5SMBJ26CA BFE 28.90 31.90 1 26.0 1.0 42.1 35.7 54.7 178.5 1.5SMBJ28A GFG 1.5SMBJ28CA BFG 31.10 34.40 1 28.0 1.0 45.4 33.1 59.0 165.5 1.5SMBJ30A GFK 1.5SMBJ30CA BFK 33.30 36.80 1 30.0 1.0 48.4 31.0 62.9 155.0 1.5SMBJ33A GFM 1.5SMBJ33CA BFM 36.70 40.60 1 33.0 1.0 53.3 28.2 69.3 141.0 1.5SMBJ36A GFP 1.5SMBJ36CA BFP 40.00 44.20 1 36.0 1.0 58.1 25.9 75.5 129.5 1.5SMBJ40A GFR 1.5SMBJ40CA BFR 44.40 49.10 1 40.0 1.0 64.5 23.3 83.9 116.5 1.5SMBJ43A GFT 1.5SMBJ43CA BFT 47.80 52.80 1 43.0 1.0 69.4 21.7 90.2 108.5 1.5SMBJ45A GFV 1.5SMBJ45CA BFV 50.00 55.30 1 45.0 1.0 72.7 20.6 94.5 103.0 1.5SMBJ48A GFX 1.5SMBJ48CA BFX 53.30 58.90 1 48.0 1.0 77.4 19.4 100.6 97.0 1.5SMBJ51A GFZ 1.5SMBJ51CA BFZ 56.70 62.70 1 51.0 1.0 82.4 18.2 107.1 91.0 1.5SMBJ54A GGE 1.5SMBJ54CA BGE 60.00 66.30 1 54.0 1.0 87.1 17.3 113.2 86.5 1.5SMBJ58A GGG 1.5SMBJ58CA BGG 64.40 71.20 1 58.0 1.0 93.6 16.1 121.7 80.5 1.5SMBJ60A GGK 66.70 73.70 1 60.0 1.0 96.8 15.5 125.8 77.5 1.5SMBJ64A GGM 71.10 78.60 1 64.0 1.0 103.0 14.6 133.9 73.0 1.5SMBJ70A GGP 77.80 86.00 1 70.0 1.0 113.0 13.3 146.9 66.5 1.5SMBJ75A GGR 83.30 92.10 1 75.0 1.0 121.0 12.4 157.3 62.0 1.5SMBJ78A GGT 86.70 95.80 1 78.0 1.0 126.0 11.9 163.8 59.5 1.5SMBJ85A GGV 94.40 104.00 1 85.0 1.0 137.0 11.0 178.1 55.0 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  1.5SMBJ Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A A B C A B B C G D F H A (Max.) C D E Dimension A B C D E F G H SMB (DO-214AA) MM DIMENSIONS: (INCHES) 4.06 - 4.57 (0.160 - 0.180) 3.30 - 3.94 E (0.130 - 0.155) 1.95 - 2.20 (0.077 - 0.087) MM DIMENSIONS: (INCHES) 0.15 - 0.31 (0.006 - 0.012) 5.21 - 5.59 (0.205 - 0.220) 0.05 - 0.203 (0.002 - 0.008) 2.13 - 2.44 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: Dimension MM (INCHES) F B (Min.) C (Min.) B C SMB (DO-214AA) 2.69 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case............................................Molded plastic per UL Class 94V-0 Polarity....................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight............................................................................0.093 grams Typical Part Marking MANUFACTURER’S TRADEMARK YWW XXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  1.5SMBJ Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve PPPM Peak Pulse Power (kW) 100 Non-repetitive pulse waveform shown below TA = 25 °C 10 1 5.0 x 5.0 mm (0.2 x 0.2 ˝) copper pad areas 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms Peak Pulse Power (PPP) or Current (IPPM) Derating in Percentage (%) Peak Pulse Power 100 75 50 25 0 0 25 50 td – Pulse Width (sec.) Pulse Waveform Peak Value IPPM Half Value IPPM / 2 50 0 10/1000 µsec. Waveform as defined by R.E.A. td 0 1.0 2.0 3.0 Bidirectional v-0v 100 Bidirectional @ VR 10 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVP-P 1 IFSM Peak Forward Surge Current (A) Steady State Power Dissipation (W) 4 3 2 1 75 100 10 100 1000 Maximum Non-repetitive Forward Surge Current 5 50 Unidirectional @ VR VBR – Reverse Breakdown Voltage (V) 6 25 175 Unidirectional v-0v 1 4.0 Steady State Power Derating Curve 0 150 1000 T – Time (ms) 0 125 10000 TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM TP = 10 µsec. 100 100 Typical Junction Capacitance CJ Junction Capacitance (pF) IPPM Peak Pulse Current % IRSM 150 75 TA – Ambient Temperature 125 TL – Lead Temperature (°C) 150 175 120 Unidirectional only 100 80 60 40 20 0 1 10 100 Number of Cycles at 60 Hz Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  1.5SMBJ Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F B D1 D P Trailer End D2 W A Unidirectional Product Orientation ....... ....... C Device ....... ....... ....... ....... 10 pitches (min.) Leader ....... ....... 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- Start W1 DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. SMB (DO-214AA) 7 Inch Reel 13 Inch Reel 3.67 ± 0.20 (0.144 ± 0.008) 5.60 ± 0.20 (0.220 ± 0.008) 2.57 ± 0.20 (0.101 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 178 330 (7.008) (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.30 (0.472 ± 0.012) 18.4 MAX. (0.724) 500 3,000 08/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R