1.5SMC16CA-H

CO LO & MP LI GE AN N T FR EE *R oH S ** HA Features Applications ■ RoHS compliant* and halogen free** ■ IEC 61000-4-2 ESD (Min. Level 4) ■ Surface Mount SMC package ■ IEC 61000-4-4 EFT ■ Breakdown Voltage: 6.8 to 550 volts ■ IEC 61000-4-5 Surge ■ Peak Pulse Power: 1500 watts ■ Typical temperature coefficient: ΔVBR = 0.1 % x VBR @ 25 °C x ΔT 1.5SMC Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 550 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum Breakdown Voltage. Click these links for more information: PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Parameter PPK 1500 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 200 Amps VF 3.5 5.0 Volts TJ -55 to +150 °C TSTG -55 to +150 °C Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) 1.5SMC6.8A ~ 1.5SMC200A 1.5SMC220A ~1.5SMC550A Operating Temperature Range Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order 1.5SMC 6.8 CA - H Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Series 1.5SMC = SMC/DO-214AB Breakdown Voltage 6.8 to 550 = 6.8 to 550 VBD Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device Reel (blank) = 13 inch reel -H = 7 inch reel WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part No. Marking Bidirectional Device Part No. Marking Breakdown Voltage VBR (Volts) Min. 1.5SMC6.8A 6V8A 1.5SMC6.8CA 6V8C 6.45 1.5SMC7.5A 7V5A 1.5SMC7.5CA 7V5C 7.13 1.5SMC8.2A 8V2A 1.5SMC8.2CA 8V2C 7.79 1.5SMC9.1A 9V1A 1.5SMC9.1CA 9V1C 8.65 1.5SMC10A 10A 1.5SMC10CA 10C 9.5 1.5SMC11A 11A 1.5SMC11CA 11C 10.5 1.5SMC12A 12A 1.5SMC12CA 12C 11.4 1.5SMC13A 13A 1.5SMC13CA 13C 12.4 1.5SMC15A 15A 1.5SMC15CA 15C 14.3 1.5SMC16A 16A 1.5SMC16CA 16C 15.2 1.5SMC18A 18A 1.5SMC18CA 18C 17.1 1.5SMC20A 20A 1.5SMC20CA 20C 19 1.5SMC22A 22A 1.5SMC22CA 22C 20.9 1.5SMC24A 24A 1.5SMC24CA 24C 22.8 1.5SMC27A 27A 1.5SMC27CA 27C 25.7 1.5SMC30A 30A 1.5SMC30CA 30C 28.5 1.5SMC33A 33A 1.5SMC33CA 33C 31.4 1.5SMC36A 36A 1.5SMC36CA 36C 34.2 1.5SMC39A 39A 1.5SMC39CA 39C 37.1 1.5SMC43A 43A 1.5SMC43CA 43C 40.9 1.5SMC47A 47A 1.5SMC47CA 47C 44.7 1.5SMC51A 51A 1.5SMC51CA 51C 48.5 1.5SMC56A 56A 1.5SMC56CA 56C 53.2 1.5SMC62A 62A 1.5SMC62CA 62C 58.9 1.5SMC68A 68A 1.5SMC68CA 68C 64.6 1.5SMC75A 75A 1.5SMC75CA 75C 71.3 1.5SMC82A 82A 1.5SMC82CA 82C 77.9 1.5SMC91A 91A 1.5SMC91CA 91C 86.5 1.5SMC100A 100A 1.5SMC100CA 100C 95 1.5SMC110A 110A 1.5SMC110CA 110C 105 1.5SMC120A 120A 1.5SMC120CA 120C 114 1.5SMC130A 130A 1.5SMC130CA 130C 124 1.5SMC150A 150A 1.5SMC150CA 150C 143 1.5SMC160A 160A 1.5SMC160CA 160C 152 1.5SMC170A 170A 1.5SMC170CA 170C 162 1.5SMC180A 180A 1.5SMC180CA 180C 171 1.5SMC200A 200A 1.5SMC200CA 200C 190 1.5SMC220A 220A 1.5SMC220CA 220C 209 1.5SMC250A 250A 1.5SMC250CA 250C 237 1.5SMC300A 300A 1.5SMC300CA 300C 285 1.5SMC350A 350A 1.5SMC350CA 350C 332 1.5SMC400A 400A 1.5SMC400CA 400C 380 1.5SMC440A 440A 1.5SMC440CA 440C 418 1.5SMC480A 480A 1.5SMC480CA 480C 456 1.5SMC510A 510A 1.5SMC510CA 510C 485 1.5SMC530A 530A 1.5SMC530CA 530C 503.5 1.5SMC540A 540A 1.5SMC540CA 540C 513 1.5SMC550A 550A 1.5SMC550CA 550C 522.5 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. @ IT Max. (mA) 7.14 7.88 8.61 9.5 10.5 11.6 12.6 13.7 15.8 16.8 18.9 21 23.1 25.2 28.4 31.5 34.7 37.8 41 45.2 49.4 53.6 58.8 65.1 71.4 78.8 86.1 95.5 105 116 126 137 158 168 179 189 210 231 263 315 368 420 462 504 535 556.5 567 577.5 3. 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Working Maximum Peak Reverse Reverse Leakage Voltage @ VRWM Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current Maximum Clamping Voltage @ Ipp Maximum Peak Pulse Current (10/1000 μs) (10/1000 μs) (8/20 μs) (8/20 μs) VRWM (V) IR (μA) Vc (V) Ipp (A) Vc (V) Ipp (A) 5.8 6.4 7.02 7.78 8.55 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53 58.1 64.1 70.1 77.8 85.5 94 102 111 128 136 145 154 171 185 214 256 300 342 376 408 434 477 486 495 1000 500 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77 85 92 103 113 125 137 152 165 179 207 219 234 246 274 328 344 414 482 548 602 658 698 725 740 760 144.8 134.5 125.6 113.4 104.8 97.4 91 83.5 71.7 67.6 60.3 54.9 49.7 45.8 40.5 36.7 33.3 30.5 28.2 25.6 23.5 21.7 19.7 17.9 16.5 14.8 13.5 12.2 11.1 10 9.2 8.5 7.3 6.9 6.5 6.2 5.5 4.6 4.4 3.7 3.2 2.8 2.5 2.3 2.1 2.1 2 2 13.7 14.7 15.7 17.4 18.9 20.3 22 23.7 27.6 29.3 32.8 36.0 39.8 43.2 48.8 53.8 59.4 64.9 70.1 77.1 84.2 91.1 100.1 110.5 119.6 133.9 146.9 162.5 178.1 198 214.5 232.7 269.1 284.7 304.2 319.8 356.2 426.4 447.2 538.2 626.6 712.4 782.6 855.4 907.4 942.5 962 988 724.0 672.5 628.0 567.0 524.0 487.0 455 417.5 358.5 338.0 301.5 274.5 248.5 229.0 202.5 183.5 166.5 152.5 141.0 128.0 117.5 108.5 98.5 89.5 82.5 74.0 67.5 61.0 55.5 50 46.0 42.5 36.5 34.5 32.5 31.0 27.5 23.0 22.0 18.5 16.0 14.0 12.5 11.4 10.7 10.3 10 10 For bidirectional devices with a VR of 10 volts or less, the IR limit is double. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 200 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 0 25 0 50 75 100 125 150 175 200 IFSM - Peak Forward Surge Current (A) Peak Pulse Derating in Percent of Peak Power or Current 100 Ambient Temperature (°C) 180 160 140 120 100 80 60 40 20 0 1 10 100 Number of Cycles at 60 Hz Pulse Waveform Typical Junction Capacitance 100000 TR=10 µs IRSM Half value= 2 CJ - Junction Capacitance (pF) IP, Peak Pulse Current (%) Bidirectional V = 0 V Peak value (IRSM) 100 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP 0 0 2.0 1.0 3.0 4.0 T, Time (ms) 10000 Unidirectional V = 0 V 1000 Unidirectional @ VR 100 10 T = 25 °C J f = 1.0 MHz Vsig = 50 mVp-p 1 1 Bidirectional @ VR 10 100 1000 VBR - Reverse Breakdown Voltage (V) Pulse Rating Curve Steady State Power Derating Curve 6.5 6.0 5.5 100 Steady State Power Dissipation (W) PP, Peak Power (KW) TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 0.1 µs 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 150 TL - Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A CATHODE BAND (FOR UNIDIRECTIONAL PRODUCTS ONLY) B C B C F Dimension a (Max.) E G D Dimension A B C D E F G SMC (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.90 - 3.20 (0.115 - 0.125) 7.75 - 8.13 (0.305 - 0.320) 0.05 - 0.202 (0.002 - 0.008) 2.00 - 2.62 (0.079 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: b (Min.) c (Min.) SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Unidirectional Product Orientation Trailer ....... ....... End C Device ....... ....... Leader ....... ....... ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- MM (INCHES) SMC (DO-214AB) 7 Inch Reel 13 Inch Reel 6.0 ± 2.0 (0.236 - 0.079) 8.3 ± 0.20 (0.327 ± 0.008) 2.5 ± 0.20 (0.098 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 178 (7.008) 330 (12.992) 50.0 MIN. (1.969) 13.0 +0.50/-0.20 (0.512 +0.020/-0.008) 1.75 ± 0.10 (0.069 ± 0.004) 7.50 ± 0.10 (0.295 ± 0.004) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 0.30 ± 0.10 (0.012 ± 0.004) 16.00 ± 0.30 (0.630 ± 0.012) 22.4 MAX. (0.882) 500 3,000 REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL