1.5SMC22A-Q

AUTOMOTIVE G R A DE Features Applications n Breakdown Voltage: 6.8 to 130 volts n Protection of I/O interfaces n Power Dissipation: 1500 watts n Overvoltage transient protection n RoHS compliant* and halogen free** n Telecom, computer, industrial and consumer electronics applications n Surface Mount SMC package n AEC-Q101 compliant*** n Protection of power buses 1.5SMC-Q Transient Voltage Suppressor Diode Series General Information Manufacturers of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 130 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit PPK 1500 Watts IFSM 200 Amps Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF 3.5 Volts Operating Temperature Range TJ -55 to +150 °C -55 to +150 °C Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Storage Temperature Range TSTG 1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. 2. Thermal Resistance Junction to Lead. 3. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order 1.5SMC 6.8 CA - Q Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com Series 1.5SMC = SMC/DO-214AB Breakdown Voltage 6.8 ~ 130 = 6.8 to 130 VBR Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch reel (3000 pcs.) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. *** Q suffix for applications requiring appropriate AEC-Q101 compliance for electronic limiters. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  1.5SMC-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Bidirectional Device Maximum Working Maximum Clamping Breakdown Voltage Peak Reverse Voltage VBR (Volts) Reverse Leakage @ Ipp Voltage @ VRWM (10/1000 µs) Part No. NEW! NEW! Marking Part No. Marking Min. Max. @ IT (mA) VRWM (V) IR (μA) Vc (V) Maximum Peak Pulse Current (10/1000 µs) Maximum Maximum Clamping Peak Voltage Pulse @ Ipp Current (8/20 µs) (8/20 µs) Ipp (A) Vc (V) Ipp (A) 1.5SMC6.8A-Q 6V8AQ 1.5SMC6.8CA-Q 6V8CQ 6.45 7.14 10 5.8 1000 10.5 144.8 13.7 724.0 1.5SMC7.5A-Q 7V5AQ 1.5SMC7.5CA-Q 7V5CQ 7.13 7.88 10 6.4 500 11.3 134.5 14.7 672.5 1.5SMC8.2A-Q 8V2AQ 1.5SMC8.2CA-Q 8V2CQ 7.79 8.61 10 7.02 200 12.1 125.6 15.7 628.0 1.5SMC9.1A-Q 9V1AQ 1.5SMC9.1CA-Q 9V1CQ 8.65 9.5 1 7.78 50 13.4 113.4 17.4 567.0 10CQ 9.5 10.5 1 8.55 10 14.5 104.8 18.9 524.0 1.5SMC10A-Q 10AQ 1.5SMC10CA-Q 1.5SMC11A-Q 11AQ 1.5SMC11CA-Q 11CQ 10.5 11.6 1 9.4 5 15.6 97.4 20.3 487.0 1.5SMC12A-Q 12AQ 1.5SMC12CA-Q 12CQ 11.4 12.6 1 10.2 5 16.7 91.0 22.0 455.0 1.5SMC13A-Q 13AQ 1.5SMC13CA-Q 13CQ 12.4 13.7 1 11.1 1 18.2 83.5 23.7 417.5 1.5SMC15A-Q 15AQ 1.5SMC15CA-Q 15CQ 14.3 15.8 1 12.8 1 21.2 71.7 27.6 358.5 1.5SMC16A-Q 16AQ 1.5SMC16CA-Q 16CQ 15.2 16.8 1 13.6 1 22.5 67.6 29.3 338.0 301.5 1.5SMC18A-Q 18AQ 1.5SMC18CA-Q 18CQ 17.1 18.9 1 15.3 1 25.2 60.3 32.8 1.5SMC20A-Q 20AQ 1.5SMC20CA-Q 20CQ 19 21 1 17.1 1 27.7 54.9 36.0 274.5 1.5SMC22A-Q 22AQ 1.5SMC22CA-Q 22CQ 20.9 23.1 1 18.8 1 30.6 49.7 39.8 248.5 1.5SMC24A-Q 24AQ 1.5SMC24CA-Q 24CQ 22.8 25.2 1 20.5 1 33.2 45.8 43.2 229.0 1.5SMC27A-Q 27AQ 1.5SMC27CA-Q 27CQ 25.7 28.4 1 23.1 1 37.5 40.5 48.8 202.5 1.5SMC30A-Q 30AQ 1.5SMC30CA-Q 30CQ 28.5 31.5 1 25.6 1 41.4 36.7 53.8 183.5 1.5SMC33A-Q 33AQ 1.5SMC33CA-Q 33CQ 31.4 34.7 1 28.2 1 45.7 33.3 59.4 166.5 1.5SMC36A-Q 36AQ 1.5SMC36CA-Q 36CQ 34.2 37.8 1 30.8 1 49.9 30.5 64.9 152.5 1.5SMC39A-Q 39AQ 1.5SMC39CA-Q 39CQ 37.1 41 1 33.3 1 53.9 28.2 70.1 141.0 1.5SMC43A-Q 43AQ 1.5SMC43CA-Q 43CQ 40.9 45.2 1 36.8 1 59.3 25.6 77.1 128.0 1.5SMC47A-Q 47AQ 1.5SMC47CA-Q 47CQ 44.7 49.4 1 40.2 1 64.8 23.5 84.2 117.5 1.5SMC51A-Q 51AQ 1.5SMC51CA-Q 51CQ 48.5 53.6 1 43.6 1 70.1 21.7 91.1 108.5 1.5SMC56A-Q 56AQ 1.5SMC56CA-Q 56CQ 53.2 58.8 1 47.8 1 77 19.7 100.1 98.5 1.5SMC62A-Q 62AQ 1.5SMC62CA-Q 62CQ 58.9 65.1 1 53 1 85 17.9 110.5 89.5 1.5SMC68A-Q 68AQ 1.5SMC68CA-Q 68CQ 64.6 71.4 1 58.1 1 92 16.5 119.6 82.5 1.5SMC75A-Q 75AQ 1.5SMC75CA-Q 75CQ 71.3 78.8 1 64.1 1 103 14.8 133.9 74.0 1.5SMC82A-Q 82AQ 1.5SMC82CA-Q 82CQ 77.9 86.1 1 70.1 1 113 13.5 146.9 67.5 1.5SMC91A-Q 91AQ 1.5SMC91CA-Q 91CQ 86.5 95.5 1 77.8 1 125 12.2 162.5 61.0 1.5SMC100A-Q 100AQ 1.5SMC100CA-Q 100CQ 95 105 1 85.5 1 137 11.1 178.1 55.5 1.5SMC110A-Q 110AQ 1.5SMC110CA-Q 110CQ 105 116 1 94 1 152 10 198 50 1.5SMC120A-Q 120AQ 1.5SMC120CA-Q 120CQ 114 126 1 102 1 165 9.2 214.5 46.0 1.5SMC130A-Q 130AQ 1.5SMC130CA-Q 130CQ 124 137 1 111 1 179 8.5 232.7 42.5 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  1.5SMC-Q Transient Voltage Suppressor Diode Series Rating100 & Characteristic Curves 200 180 Non-Repetitive Forward Surge Current 200 Maximum IFSM IFSM - Peak Forward Surge Current (A) - Peak Forward Surge Current (A) IFSM - Peak Forward Surge Current (A) Pulse 100 Derating Curve Peak Pulse Power (P Peak Pulse Power (P Peak Pulse Power (P PP) or PP) or PP) or Current (I ) Derating (%) Current (I Current (I PPM PPM) Derating (%) PPM) Derating (%) 100 75 75 75 50 50 50 25 25 25 0 0 0 0 25 50 75 100 125 150 175 200 0 25 TA - Ambient Temperature (°C) 50 75 100 125 150 175 200 0 25 TA - Ambient Temperature (°C) 50 75 100 125 150 175 200 160 180 200 (Unidirectional Only) 140 160 180 120 140 160 100 120 140 80 100 120 60 80 100 40 60 80 20 40 60 200 40 200 0 1 10 Number of Cycles at 60 Hz 10 100 1 Number of Cycles at 60 Hz 10 100 Number of Cycles at 60 Hz TA - Ambient Temperature (°C) Typical 100000 Junction Capacitance IPPM - Peak Pulse Current (% I IPPM - Peak Pulse Current (% I IPPM - Peak Pulse Current (% I RSM)RSM)RSM) 150 tr=10 µsec. tr=10 µsec. Peak value (IPPM) Pulse width (t TJ = 25 °C d) tr=10 µsec. is defined as the point Peak value (IPPM) Pulse width (t where the peak current IPPM TJ = 25 °C d) is defined as the point decays to 50 % of I Half value = PPM Peak value (IPPM2) Pulse width (td) where the peak current IPPM is defined as the point decays to 50 % of I 10 x 1000 µsec. waveform Half value = PPM 2 where the peak current as defined by R.E.A. IPPM decays to 50 % of I 10 x 1000 µsec. waveform Half value = PPM 2 as defined by R.E.A. td 10 x 1000 µsec. waveform as defined by R.E.A. td 150 100 100 100 50 50 50 0 0 0 TJ = 25 °C td 0 1.0 0 0 3.0 4.0 1.0 t - Time (ms) 2.0 3.0 4.0 1.0 t - Time (ms) 2.0 3.0 4.0 Peak Pulse Power Rating 2.0 CJ - Junction Capacitance (pF) CJ - Junction Capacitance (pF) CJ - Junction Capacitance (pF) Pulse Waveform 150 100000 10000 100000 10000 1000 100 1000 Unidirectional @ VR 100 10 T = 25 °C 100 J f = 1.0 MHz 10 TV = 25 °C Bidirectional @ VR Jsig = 50 mVp-p f = 1.0 MHz 1 10 TV = 25 °C Bidirectional @ VR Jsig = 50 mVp-p 1 10 100 1000 1 f = 1.0 MHz Bidirectional @ VR Vsig = 50 mVp-p VBR - Reverse Breakdown Voltage (V) 1 10 100 1000 1 VBR - Reverse Breakdown Voltage (V) 1 10 100 1000 V 100 10 10 10 x 1.0 ms 10 ms 1.0 ms 10 ms Steady State Power Dissipation (W) Steady State Power Dissipation (W) Steady State Power Dissipation (W) PPM PPPMP - Peak Pulse Power (kW) - Peak Pulse Power (kW) - Peak Pulse Power (kW) PPMP 100 0.1 µs 1 Bidirectional V = 0 V Unidirectional V = 0 V - Reverse Breakdown Voltage (V) Steady State PowerBRDerating Curve t - Time (ms) 8.0 COPPER PAD AREAS (0.31) 8.0 x COPPER PAD AREAS (0.31) 1.0 µs 10 µs 100 µs 8.0 x COPPER PAD AREAS (0.31) td - Pulse Width (Seconds) 1.0 µs 10 µs 100 µs Bidirectional V = 0 V Bidirectional V = 0 V Unidirectional V = 0 V Unidirectional @ VR Unidirectional V = 0 V Unidirectional @ VR 1000 10000 100 8.0 (0.31) 8.0 1 (0.31) 0.1 µs 8.0 1 (0.31) 100 1 6.5 6.0 6.5 5.5 6.0 5.0 6.5 5.5 4.5 6.0 5.0 4.0 5.5 4.5 3.5 5.0 4.0 3.0 4.5 3.5 2.5 4.0 3.0 2.0 3.5 2.5 1.5 3.0 2.0 1.0 2.5 1.5 0.5 2.0 1.0 0.0 1.5 0.5 1.0 0 0.0 0.5 0 0.0 0 25 50 75 100 125 TL - Lead Temperature (°C) 50 75 100 125 150 25 150 td - Pulse Width (Seconds) Specifications are subject to change without 0.1 µs 1.0 µs 10 µs notice. 100 µs 1.0 ms 10 ms T - Lead Temperature (°C) L 50 25 75 100 125 150 Users should verify actual device performance in their specific applications. d - Pulse Width (Seconds) The products described herein tand this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. TL - Lead Temperature (°C)  1.5SMC-Q Voltage Suppressor Diode Series 3312 - Transient 2 mm SMD Trimming Potentiometer Product Dimensions Recommended Footprint CATHODE BAND CATHODE BAND (FOR UNIDIRECTIONAL (FOR UNIDIRECTIONAL PRODUCTS ONLY) PRODUCTS ONLY) B A A B a C a C b c Dimension GG a (Max.) F F HH D D E E Dimension A b (Min.) c (Min.) MMMM SMC (DO-214AB) DIMENSIONS: DIMENSIONS:(INCHES) (INCHES) B C D E F G H DIMENSIONS: 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.90 - 3.20 (0.115 - 0.125) 0.15 - 0.31 (0.006 - 0.012) 7.75 - 8.13 (0.305 - 0.320) 0.203 MAX. (0.008) 2.00 - 2.62 (0.079 - 0.103) 0.76 - 1.52 (0.030 - 0.060) MM (INCHES) b c SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case............................................Molded plastic per UL Class 94V-0 Polarity....................... Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level.................................................................1 ESD Classification (HBM)............................................................. 3B Typical Part Marking MANUFACTURER’S TRADEMARK YWW XXXXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  1.5SMC-Q Transient Voltage Suppressor Diode Series CDDFN5-0504N - TVS/Steering Diode Array Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation ....... ....... C Device ....... ....... Leader ....... ....... 10 pitches (min.) DIMENSIONS: 10 pitches (min.) Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item W1 Start -- SMC (DO-214AB) 13-Inch Reel 6.0 ± 2.0 (0.236 - 0.079) 8.3 ± 0.20 (0.327 ± 0.008) 2.5 ± 0.20 (0.098 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 330 (12.992) 50.0 MIN. (1.969) 13.0 +0.50/-0.20 (0.512 +0.020/-0.008) 1.75 ± 0.10 (0.069 ± 0.004) 7.50 ± 0.10 (0.295 ± 0.004) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 0.30 ± 0.10 (0.012 ± 0.004) 16.00 ± 0.30 (0.630 ± 0.012) 22.4 MAX. (0.882) 3000 REV. 10/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R