1.5SMC33CA-Q

GRADE ** HA *R oH S CO LO & MP LI GE AN N T FR EE AUTOMOTIVE Features Applications ■ Surface Mount SMC package ■ Protection of power buses ■ Breakdown Voltage: 6.8 to 130 volts ■ Protection of I/O interfaces ■ Power Dissipation: 1500 watts ■ Overvoltage transient protection ■ RoHS compliant* and halogen free** ■ Telecom, computer, industrial and consumer electronics applications ■ AEC-Q101 compliant*** 1.5SMC-Q Transient Voltage Suppressor Diode Series General Information Additional Information Manufacturers of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Breakdown Voltages from 6.8 V up to 130 V. Typical fast response times are less than 1.0 picosecond for unidirectional devices and less than 5.0 picoseconds for bidirectional devices from 0 V to Minimum Breakdown Voltage. Click these links for more information: PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Symbol Value Unit Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Parameter PPK 1500 Watts Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) IFSM 200 Amps Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF 3.5 Volts Operating Temperature Range TJ -55 to +150 °C TSTG -55 to +150 °C Storage Temperature Range 1. 2. 3. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). How to Order 1.5SMC 6.8 CA - Q Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Series 1.5SMC = SMC/DO-214AB Breakdown Voltage 6.8 ~ 130 = 6.8 to 130 VBR Suffix A = 5 % Tolerance Unidirectional Device CA = 5 % Tolerance Bidirectional Device AEC-Q101 Suffix Q = AEC-Q101 Compliant, 13-inch reel (3000 pcs.) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. *** Q suffix for applications requiring appropriate AEC-Q101 compliance for electronic limiters. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC-Q Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part No. NEW! NEW! Marking Bidirectional Device Part No. Maximum Working Maximum Clamping Breakdown Voltage Peak Reverse Voltage VBR (Volts) Reverse Leakage @ Ipp Voltage @ VRWM Marking Min. Max. @ IT (mA) VRWM (V) Maximum Peak Pulse Current (10/1000 μs) (10/1000 μs) IR (μA) Vc (V) Maximum Maximum Clamping Peak Voltage Pulse @ Ipp Current (8/20 μs) (8/20 μs) Ipp (A) Vc (V) Ipp (A) 1.5SMC6.8A-Q 6V8AQ 1.5SMC6.8CA-Q 6V8CQ 6.45 7.14 10 5.8 1000 10.5 144.8 13.7 724.0 1.5SMC7.5A-Q 7V5AQ 1.5SMC7.5CA-Q 7V5CQ 7.13 7.88 10 6.4 500 11.3 134.5 14.7 672.5 1.5SMC8.2A-Q 8V2AQ 1.5SMC8.2CA-Q 8V2CQ 7.79 8.61 10 7.02 200 12.1 125.6 15.7 628.0 1.5SMC9.1A-Q 9V1AQ 1.5SMC9.1CA-Q 9V1CQ 8.65 9.5 1 7.78 50 13.4 113.4 17.4 567.0 1.5SMC10A-Q 10AQ 1.5SMC10CA-Q 10CQ 9.5 10.5 1 8.55 10 14.5 104.8 18.9 524.0 1.5SMC11A-Q 11AQ 1.5SMC11CA-Q 11CQ 10.5 11.6 1 9.4 5 15.6 97.4 20.3 487.0 1.5SMC12A-Q 12AQ 1.5SMC12CA-Q 12CQ 11.4 12.6 1 10.2 5 16.7 91.0 22.0 455.0 1.5SMC13A-Q 13AQ 1.5SMC13CA-Q 13CQ 12.4 13.7 1 11.1 1 18.2 83.5 23.7 417.5 1.5SMC15A-Q 15AQ 1.5SMC15CA-Q 15CQ 14.3 15.8 1 12.8 1 21.2 71.7 27.6 358.5 1.5SMC16A-Q 16AQ 1.5SMC16CA-Q 16CQ 15.2 16.8 1 13.6 1 22.5 67.6 29.3 338.0 1.5SMC18A-Q 18AQ 1.5SMC18CA-Q 18CQ 17.1 18.9 1 15.3 1 25.2 60.3 32.8 301.5 1.5SMC20A-Q 20AQ 1.5SMC20CA-Q 20CQ 19 21 1 17.1 1 27.7 54.9 36.0 274.5 1.5SMC22A-Q 22AQ 1.5SMC22CA-Q 22CQ 20.9 23.1 1 18.8 1 30.6 49.7 39.8 248.5 1.5SMC24A-Q 24AQ 1.5SMC24CA-Q 24CQ 22.8 25.2 1 20.5 1 33.2 45.8 43.2 229.0 1.5SMC27A-Q 27AQ 1.5SMC27CA-Q 27CQ 25.7 28.4 1 23.1 1 37.5 40.5 48.8 202.5 1.5SMC30A-Q 30AQ 1.5SMC30CA-Q 30CQ 28.5 31.5 1 25.6 1 41.4 36.7 53.8 183.5 1.5SMC33A-Q 33AQ 1.5SMC33CA-Q 33CQ 31.4 34.7 1 28.2 1 45.7 33.3 59.4 166.5 1.5SMC36A-Q 36AQ 1.5SMC36CA-Q 36CQ 34.2 37.8 1 30.8 1 49.9 30.5 64.9 152.5 1.5SMC39A-Q 39AQ 1.5SMC39CA-Q 39CQ 37.1 41 1 33.3 1 53.9 28.2 70.1 141.0 1.5SMC43A-Q 43AQ 1.5SMC43CA-Q 43CQ 40.9 45.2 1 36.8 1 59.3 25.6 77.1 128.0 1.5SMC47A-Q 47AQ 1.5SMC47CA-Q 47CQ 44.7 49.4 1 40.2 1 64.8 23.5 84.2 117.5 1.5SMC51A-Q 51AQ 1.5SMC51CA-Q 51CQ 48.5 53.6 1 43.6 1 70.1 21.7 91.1 108.5 1.5SMC56A-Q 56AQ 1.5SMC56CA-Q 56CQ 53.2 58.8 1 47.8 1 77 19.7 100.1 98.5 1.5SMC62A-Q 62AQ 1.5SMC62CA-Q 62CQ 58.9 65.1 1 53 1 85 17.9 110.5 89.5 1.5SMC68A-Q 68AQ 1.5SMC68CA-Q 68CQ 64.6 71.4 1 58.1 1 92 16.5 119.6 82.5 1.5SMC75A-Q 75AQ 1.5SMC75CA-Q 75CQ 71.3 78.8 1 64.1 1 103 14.8 133.9 74.0 1.5SMC82A-Q 82AQ 1.5SMC82CA-Q 82CQ 77.9 86.1 1 70.1 1 113 13.5 146.9 67.5 1.5SMC91A-Q 91AQ 1.5SMC91CA-Q 91CQ 86.5 95.5 1 77.8 1 125 12.2 162.5 61.0 1.5SMC100A-Q 100AQ 1.5SMC100CA-Q 100CQ 95 105 1 85.5 1 137 11.1 178.1 55.5 1.5SMC110A-Q 110AQ 1.5SMC110CA-Q 110CQ 105 116 1 94 1 152 10 198 50 1.5SMC120A-Q 120AQ 1.5SMC120CA-Q 120CQ 114 126 1 102 1 165 9.2 214.5 46.0 1.5SMC130A-Q 130AQ 1.5SMC130CA-Q 130CQ 124 137 1 111 1 179 8.5 232.7 42.5 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance unidirectional device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC-Q Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Forward Surge Current 200 180 IFSM - Peak Forward Surge Current (A) Peak Pulse Power (PPP) or Current (IPPM) Derating (%) 100 75 50 25 160 140 120 100 80 60 40 20 0 0 0 50 25 75 100 125 150 175 1 200 10 100 Number of Cycles at 60 Hz TA - Ambient Temperature (°C) Pulse Waveform Typical Junction Capacitance 100000 Bidirectional V = 0 V tr=10 µsec. TJ = 25 °C Peak value (IPPM) 100 Half value = IPPM 2 Pulse width (td) is defined as the point where the peak current decays to 50 % of IPPM 10 x 1000 µsec. waveform as defined by R.E.A. 50 td CJ - Junction Capacitance (pF) IPPM - Peak Pulse Current (% IRSM) 150 10000 Unidirectional V = 0 V 1000 100 10 T = 25 °C J f = 1.0 MHz Vsig = 50 mVp-p 1 1 0 0 1.0 2.0 3.0 Unidirectional @ VR 4.0 10 100 1000 VBR - Reverse Breakdown Voltage (V) t - Time (ms) Peak Pulse Power Rating Steady State Power Derating Curve 6.5 6.0 5.5 Steady State Power Dissipation (W) 100 PPPM - Peak Pulse Power (kW) Bidirectional @ VR 10 8.0 8.0 x COPPER PAD AREAS (0.31) (0.31) 1 0.1 µs 1.0 µs 10 µs 100 µs td - Pulse Width (Seconds) 1.0 ms 10 ms 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 150 TL - Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC-Q Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint CATHODE BAND (FOR UNIDIRECTIONAL PRODUCTS ONLY) a A B C b c G Dimension a (Max.) F H D E Dimension A B C D E F G H SMC (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.90 - 3.20 (0.115 - 0.125) 0.15 - 0.31 (0.006 - 0.012) 7.75 - 8.13 (0.305 - 0.320) 0.203 MAX. (0.008) 2.00 - 2.62 (0.079 - 0.103) 0.76 - 1.52 (0.030 - 0.060) b (Min.) c (Min.) SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B Typical Part Marking DIMENSIONS: MM (INCHES) MANUFACTURER’S TRADEMARK YWW XXXXX DATE CODE: Y = LAST DIGIT OF YEAR WW = WEEK NUMBER DEVICE ID Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 1.5SMC-Q Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Unidirectional Product Orientation ....... ....... C Leader Device ....... ....... ....... ....... 10 pitches (min.) W1 Start DIMENSIONS: 10 pitches (min.) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel MM (INCHES) -- SMC (DO-214AB) 13-Inch Reel 6.0 ± 2.0 (0.236 - 0.079) 8.3 ± 0.20 (0.327 ± 0.008) 2.5 ± 0.20 (0.098 ± 0.008) 1.50 ± 0.10 (0.059 ± 0.004) 330 (12.992) 50.0 MIN. (1.969) 13.0 +0.50/-0.20 (0.512 +0.020/-0.008) 1.75 ± 0.10 (0.069 ± 0.004) 7.50 ± 0.10 (0.295 ± 0.004) 8.00 ± 0.10 (0.315 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 0.30 ± 0.10 (0.012 ± 0.004) 16.00 ± 0.30 (0.630 ± 0.012) 22.4 MAX. (0.882) 3000 REV. 10/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL