Features
n Balanced Mini-TRIGARD™ Series
(5 mm diameter, 7.3 mm length)
n Ideal for board level protection of broadband
circuits
n Leadless, surface mount for economical
assembly
n Stable breakdown throughout life
n High surge current rating, low insertion loss
n Recognized per UL 497B
(File: E153537)
n RoHS compliant* version available
Check out the all new GDT35 Series for enhanced
next-generation surge protection performance!
2036-xx-SM Precision Gas Discharge Tube Surge Protector
Bourns now offers a surface mount (SM) 3-electrode Gas Discharge Tube (GDT) surge
protection device. The high quality and outstanding features of the Bourns® miniature 2036
TRIGARD™ series GDT continue in this new SM version for ‘pick and place’ manufacturing
techniques. The 2036 SM device is ideal for board level protection of high bandwidth
applications such as xDSL, cable broadband and high speed Ethernet. It has high energy
handling capability, long and stable life performance, low capacitance of less than 2 pF, and
measures only 5 mm in diameter. Bourns® GDTs are designed to prevent damage from
transient disturbances by acting as a “crowbar” in creating a short-to-ground circuit during
conduction. When a voltage transient surge exceeds the defined breakdown voltage level
of the GDT, the device becomes ionized and conduction takes place within a fraction of
a microsecond. When the surge passes and system voltage returns to normal levels, the
GDT returns to its high-impedance (off) state.
Additional Information
Click these links for more information:
PRODUCT TECHNICAL INVENTORY SAMPLES
SELECTOR LIBRARY
CONTACT
Characteristics
Test Methods per ITU-T K.12, IEEE C62.31 and IEC 61643-311 GDT standards.
Characteristic
DC Sparkover ±20 % @ 100 V/s
Impulse Sparkover (1)
100 V/µs
1000 V/µs
Characteristic
DC Sparkover ±20 % @ 100 V/s
Impulse Sparkover (1)
100 V/µs
1000 V/µs
(1)
2036-07
75 V
2036-09
90 V
250 V
525 V
250 V
550 V
2036-30
300 V
2036-35
350 V
500 V
650 V
600 V
750 V
Impulse Sparkover voltage is defined as typical values of distribution.
Model No.
2036-15
2036-20
150 V
200 V
350 V
425 V
500 V
575 V
Model No.
2036-40
2036-42
400 V
420 V
650 V
825 V
675 V
850 V
2036-23
230 V
2036-25
250 V
450 V
600 V
475 V
625 V
2036-47
470 V
2036-60
600 V
750 V
950 V
850 V
1100 V
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
2036-xx-SM Precision Gas Discharge Tube Surge Protector
Characteristics (continued)
Impulse Transverse Delay.................................1000 V/μs..........................................................< 75 ns
Insulation Resistance (IR).................................100 V (50 V for Model 2036-07 & 2036-09)......> 1010 Ω
Glow Voltage.....................................................10 mA................................................................~ 70 V
Arc Voltage........................................................1 A.....................................................................~ 10 V
Glow-Arc Transition Current........................................................................................................< 0.5 A
Capacitance......................................................1 MHz................................................................< 2 pF
DC Holdover Voltage (2).....................................>135 V, (52 V for Model 2036-07, & -09,...........< 150 ms
..........................................................................80 V for Model 2036-15)
Impulse Discharge Current................................20000 A, 8/20 µs (3)............................................ 1 operation minimum
..........................................................................10000 A, 8/20 µs............................................... 10 operations
..........................................................................200 A, 10/1000 µs ............................................ 300 operations
..........................................................................2000 A, 10/350 µs............................................. 1 operation
..........................................................................200 A, 10/700 µs .............................................. 500 operations
Alternating Discharge Current...........................20 Arms, 1 s2..................................................... 1 operation minimum
..........................................................................10 Arms, 1 s...................................................... 10 operations
Storage Temperature................................................................................................................... -55 to +105 °C
Operating Temperature................................................................................................................ -55 to +105 °C
Climatic Category (IEC 60068-1)................................................................................................ 55/105/21
Moisture Sensitivity Level............................................................................................................ 1
ESD Classification (HBM)........................................................................................................... N/A
Notes:
• Recognized per UL 497B (File: E153537)
• No model number marking on tube; date code and voltage only: month
year digits, xxxV (e.g. 0209 400V).
• The rated discharge current for Mini-TRIGARD™ GDTs is the total current
equally divided between each line to ground.
• Surface Mount (SM) parts may show a temporary increase in DCBD after
the solder reflow process. Most devices will recover within 24 hours time.
It should be noted that there is no quality defect nor change in protection
levels during the temporary change in DCBD.
• Sparkover limits after life ±25 % (-25 %,+30 % for Model 2036-07, 2036-09
and 2036-60), IR >108 Ω.
• Operating characteristics per RUS PE-80 and Telcordia GR 1361 available
on request.
• Line to Line voltage is approximately 1.8 to 2 times the stated Line to
Ground breakdown voltage.
• At delivery AQL 0.65 Level II, DIN ISO 2859.
• Bourns recommends reflowing surface mount devices per IPC/JEDEC
J-STD-020 rev D.
(2)
Network applied.
(3)
DC Sparkover may exceed ±25 % but will continue to protect without
venting.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
2036-xx-SM Precision Gas Discharge Tube Surge Protector
Product Dimensions
Recommended Pad Layout
7.3 ± 0.26
(.287 ± .010)
1.6
(.063)
0.9 ± 0.2
(.035 ± .008)
5.0 ± 0.2
(.197 ± .008)
0.5 ± 0.2
(.020 ± .008)
0.7 ± 0.2
(.028 ± .008)
5.6
(.221)
3.3
(.130)
8.2
(.323)
DIMENSIONS: MILLIMETERS/(INCHES)
How to Order
2036 - xx - SM - RP LF
Model Number Designator
Voltage (Divided by 10)
Surface Mount
Packaging Options
Blank = Bulk Packaging (Standard)
RP = Reelpack (Optional)
RP2 = Reelpack (Optional)
RoHS Compliant Option
Blank = Standard Product
LF = RoHS Compliant Product
Check out the all new GDT35 Series for enhanced next-generation
surge protection performance!
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
2036-xx-SM Precision Gas Discharge Tube Surge Protector
Packaging Specifications
Standard Packaging Quantity
Model
2036-xx-SM
Bulk
(Bag)
Tray
250
Box
Reel
1000
2036-xx-SM-RP
1000
2036-xx-SM-RP2
1000
The optional -RP & -RP2 reels are 330 mm in diameter and 23 mm wide.
-RP
4.0
1.7
2.0
16.00
NOM.
7.5
1.50 DIA.
12.0
-RP2
TOLERANCES: ±0.13 UNLESS OTHERWISE SPECIFIED
DIMENSIONS: MILLIMETERS
REV. AA – 11/22
Mini-TRIGARD™ is a trademark of Bourns, Inc.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
