2410-710-G-BC-ST

Features ■ Patented Multi-stage protection (MSP®) ■ Balanced TRIGARD® ■ Patented Switch-Grade Fail-Short Device ■ Quick response and high energy handling ■ Ideal for high-speed networks in high ■ ■ ■ ■ ■ Meets test requirements of Telcordia exposure environments ■ UL per UL 497 (File: 53117) C ® US LISTED GR 974, GR1361, SBC SR 5165 and RUS PE-80 Telcordia Analysis report DA-1547 Solid brass, gold-plated pins Test point access option Sealed option for harsh environments 2410 Series - 5-Pin Multi-Stage Protector (MSP®) Bourns® 5-Pin Multi-Stage Protector (MSP®) is the latest generation telecommunications protector for high performance and long life in overvoltage protection of copper pair voice-band and high-speed data circuits. Bourns MSP® combines the advantages of gas tube and solid state protection while integrating three advanced technologies: a proprietary high-efficiency gas discharge tube, precision matched metal oxide varistors and a patented Switch-Grade Fail-Short mechanism. The Switch-Grade Fail-Short mechanism ensures superior thermal protection with fast acting, highly reliable response to thermal overload conditions. This combined technology provides lower capacitance, higher reliability and longer life than competitive hybrid technologies. Bourns® 2410 can be used universally for POTS and high speed data, e.g. ISDN, ADSL, ADSL2+, VDSL, VDSL2, other xDSL protocols and high speed Ethernet. Bourns® MSP® technology provides unparalleled overvoltage protection with low loss on paired copper communications circuits. The 2410 series is the most economical, reliable and effective choice for overvoltage protection of copper pair circuits. Characteristics Test Methods per UL 497, CSA C22.2, Telcordia GR 974, 1361 and SBC SR 5165. DC Breakdown ............................................................................................................................................... 300-400 V AC Breakdown @ 60 Hz ................................................................................................................................. 300-400 V Impulse Breakdown 100 V/µs .................................................................................................................................................... 600 V 1000 V/µs .................................................................................................................................................. 650 V Insulation Resistance @ 100 Vdc ................................................................................................................... >1 GΩ Insertion Loss @ 100 MHz .............................................................................................................................. 14 dB1 Capacitance Tip to Ring @ 1 MHz ................................................................................................................. 10 pF typical Capacitance Tip or Ring to Ground @ 1 MHz ................................................................................................ 20 pF typical Impulse Reset 5 52 V, 260 mA ............................................................................................................................................. 1000 operations4 2,000 A, 10/250 µs .................................................................................................................................... >100 operations2 5,000 A, 20/100 µs .................................................................................................................................... >10 operations2 20,000 A, 8/20 µs ...................................................................................................................................... >10 operations4 AC Life Characteristics (Tip and Ring to Ground Simultaneously) 0.5 A rms continuous ................................................................................................................................ >30 seconds 1 A rms, 1 second, 600 ft. cable ............................................................................................................... >60 seconds 1 A rms, 1 second, 1 mile cable ................................................................................................................ >60 operations 10 A rms, 1 second ................................................................................................................................... >5 operations 65 A rms, 11 cycles ................................................................................................................................... >1 operation3 120 A rms, 0.1 second .............................................................................................................................. 1 operation High Current Capability and Thermal Operation (Tip and Ring to Ground, Vented or Non-Vented Gas Tube) ................................................................................................................... >30 A rms, simultaneously Storage and Operating Temperature .............................................................................................................. -55 to +85 °C Telcordia analyzed for controlled (non-sealed) and uncontrolled, high-exposure (sealed) environments per GR 974 and SBC SR 5165. Telcordia Technical Analysis Report DA-1547. Notes: 1 Tested according to Category 5 requirements 2 Exceeds Telcordia (Bellcore) GR 1361 3 Surpasses Telcordia GR 974 4 RUS (REA) PE-80 5 Network applied Line to Line voltage is approximately 1.8 to 2 times the stated Line to Ground breakdown voltage. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications 2410 Series - 5-Pin Multi-Stage Protector (MSP®) How To Order 2410 - X XX - X - XXX - XX Model Number Designator Module Length 3 = Standard: 52.37 mm (2.06 in.) Housing Color/Circuit Type 1 = Black/Standard 3 = Red/Special Pin Plating G = Gold Plated Protector Type MSP® = Multi-Stage Protector Special Options S = Sealed Case T = Test Points** 7 = Special Short: 41.19 mm (1.62 in.) 6 = Blue/Standard 10 = Yellow/Standard 9 = Orange/Standard Service (non-Bridgelifter) N = Tin Plated BC = Balanced Capacitance* ST = Sealed Case and Test Points** *For use on DSL Systems that require balanced capacitance of ≤1 pF. **T and ST options are not available on 2410-7x short module. Product Dimensions 2410-3 MODULE 42.17 (1.66) 12.8 (0.50) DIA. 2.2 2 PLCS. (.085) 29.9 (1.18) DIA. 2.3 5 PLCS. (.092) 5.7 (0.223) 19.0 (0.75) 11.2 (0.44) 3.6 (0.14) 5.6 (0.220) 6.1 (0.240) 11.2 (0.440) 5.1 (0.20) 10.2 (0.40) 2410-7 MODULE DIMENSIONS: MM (INCHES) 30.99 (1.22) 24.9 (0.98) 6.15 (0.24) Asia-Pacific: Tel: +886-2 2562-4117 Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 Fax: +1-951 781-5700 www.bourns.com REV. N 09/15/09 “MSP” and “TRIGARD” are registered trademarks of Bourns, Inc. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications 5.1 (0.20) 10.2 (0.40)