3310P-101-203L

3310P-101-203L

  • 厂商:

    BOURNS(伯恩斯)

  • 封装:

    插件-3P,9.53x9.53mm

  • 描述:

    可调电阻/电位器 20KΩ ±20% 250mW 插件-3P,9.53x9.53mm ±1000ppm/℃

  • 数据手册
  • 价格&库存
3310P-101-203L 数据手册
Features n Conductive plastic n PC board and bushing mount n Plastic or metal bushing and plastic shaft n Withstands typical industrial washing processes n Compact package saves board and panel space 3310 – 9 mm Square Sealed Panel Control Electrical Characteristics1 Standard Resistance Range - Linear������������������������������������������������������������������������������������������������������������������������������������������������� 1 K ohms to 1 megohm Total Resistance Tolerance - Linear Tapers������������������������������������������������������������������������������������������������������������������������������������������������������������������� ±20 % Independent Linearity������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ ±5 % End Resistance�������������������������������������������������������������������������������������������������������������������������������������������� 2 % or 2 ohms maximum (whichever is greater) Effective Electrical Angle����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������270 ° ±15 ° Contact Resistance Variation����������������������������������������������������������������������������������������������������������������������������������������� 1 % or 1 ohm (whichever is greater) Dielectric Withstanding Voltage (MIL-STD-202 – Method 301) Sea Level���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������900 VAC minimum 70,000 Feet������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������350 VAC minimum Insulation Resistance��������������������������������������������������������������������������������������������������������������������������������������������������������������������� 1,000 megohms minimum Power Rating @ 70 °C (Derate to 0 at 125 °C - Voltage Limited By Power Dissipation or 200 VAC, Whichever is Less)�������������������������������������� 0.25 watts Theoretical Resolution���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������Essentially infinite Environmental Characteristics Operating Temperature Range������������������������������������������������������������������������������������������������������������������������������������� -40 °C to +125 °C (-40 °F to +257 °F) Storage Temperature Range��������������������������������������������������������������������������������������������������������������������������������������� -55 °C to +125 °C (-67 °F to +257 °F) Temperature Coefficient Over Storage Temperature Range��������������������������������������������������������������������������������������������������������������������������� ±1,000 ppm/°C Vibration���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������30 G Total Resistance Shift��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±1 % maximum Voltage Ratio Shift�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±1 % maximum Shock�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������100 G Total Resistance Shift��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±1 % maximum Voltage Ratio Shift�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±1 % maximum Load Life��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 1,000 hours Total Resistance Shift����������������������������������������������������������������������������������������������������������������������������������������������������������������������±10 % TRS maximum Rotational Life (No Load)���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 50,000 cycles Total Resistance Shift������������������������������������������������������������������������������������������������������������������������������������������������������������������������±5 % TRS maximum Contact Resistance Variation ���������������������������������������������������������������������������������������������������������������������������������3 % or 3 ohms (whichever is greater) Moisture Resistance������������������������������������������������������������������������������������������������������������������������������������������������� MIL-STD-202, Method 103, Condition B Total Resistance Shift����������������������������������������������������������������������������������������������������������������������������������������������������������������������±10 % TRS maximum IP Rating���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������IP67 Moisture Sensitivity Level������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ 1 ESD Classification (HBM)��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������N/A Mechanical Characteristics Stop Strength������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������5.65 N-cm (8 oz.-in.) Mechanical Angle���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 300 ° nominal Torque Starting�������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3.53 N-cm (5.0 oz.-in.) maximum Running������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 3.53 N-cm (5.0 oz.-in.) maximum Mounting (Torque on Bushing)����������������������������������������������������� 45 N-cm (4.0 lb.-in.) max [plastic bushing]; 79 N-cm (7.0 lb.-in.) max [metal bushing] Weight (Single Section)������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 4.5 grams (Each Additional Section)���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2.5 grams Terminals���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������Solderable pins Soldering Condition Manual Soldering����������������������������������������������� 96.5Sn/3.0Ag/0.5Cu solid wire or no-clean rosin cored wire; 370 °C (700 °F) max. for 3 seconds Wave Soldering������������������������������������������������������������������������96.5Sn/3.0Ag/0.5Cu solder with no-clean flux; 260 °C (500 °F) max. for 5 seconds Wash Processes��������������������������������������������������������For recommended wash processes, please refer to http://www.bourns.com/pdfs/sldclen.pdf Marking����������������������������������������������������������������� Manufacturer’s trademark, model number, product code, terminal style, resistance code and date code Ganging�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2 cups maximum Hardware��������������������������������One lockwasher (H-37-5) and one mounting nut (H-38-1) is shipped with each potentiometer, except bushingless versions Flammability������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������Conforms to UL94V-0 Epoxy���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������Conforms to UL 94V-1 IP Rating���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������IP67 Switch Characteristics Switch Life��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������10K cycles Contact Resistance���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������2 ohms max. Dielectric Strength�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������350 VDC Detent Torque�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������0.5 oz-in min. Power Rating (Resistive Load)������������������������������������������������������������������������������������������������������������������������������������������������������������������100 mA @ 16 VDC 1 Electrical specifications tested at 60 RPM, at room ambient: +25 °C nominal. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Additional Features n Audio taper versions available as special order n RoHS compliant* 3310 – 9 mm Square Sealed Panel Control Standard Resistance Table Resistance Resistance (Ohms) Code 1,000 102 2,000 202 5,000 502 10,000 103 20,000 203 50,000 503 100,000 104 200,000 204 500,000 504 1,000,000 105 Popular values listed in boldface. Consult factory for special resistances. Date Code Description YYWWM M = COUNTRY OF MANUFACTURE (MEXICO) WW = WEEK NUMBER YY = LAST TWO DIGITS OF YEAR MANUFACTURED How To Order 3310 Y - 0 0 1 - 103 L Model Number Designator 3310 = 9 mm Panel Control Terminal Style Designator Single Cup: C = In-line Straight Terminals Side Exit 2.54 mm centers R = In-line Terminals Rear Exit 2.54 mm centers P = 5.08 mm x 2.54 mm Triangular Pattern Rear Exit Y = 5.08 mm x 5.08 mm Triangular Pattern Rear Exit Dual Cup (Pot/Pot or Pot/Switch): H = Dual In-line Straight Terminals Rear Exit 2.54 mm centers Shaft End Designator 0 = Shaft End Slotted 1 = Shaft End Flatted Shaft Length Designator 0 = 12.7 mm FMS Long Plastic Shaft (Available w/bushing only) 1 = 19.05 mm FMS Long Plastic Shaft (Available w/bushing only) 2 = 5.59 mm FMS Long Plastic Shaft (Bushingless version only) Bushing Designator Pot (or Pot/Pot): 1 = 6.35 mm x 6.35 mm Plastic 2 = 6.35 mm x 6.35 mm Ni Plated Brass* 5 = Bushingless (Board Level Control) Pot/Switch Bushing Designator (use with “H” terminal style only.) 3 = 6.35 mm x 6.35 mm Plastic 4 = 6.35 mm x 6.35 mm Ni Plated Brass* 6 = Bushingless (Board Level) Resistance Code (1st 2 digits are significant, 3rd digit is number of 0s to follow) RoHS Identifier L = Compliant *Bushing Designator 2 and 4 are currently available, but not recommended for new designs. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3310 – 9 mm Square Sealed Panel Control Product Dimensions 3310C-001 COMMON DIMENSIONS 3310-001 3310Y-001 9.53 ± .25 (.375 ± .010) 2 Plastic Bushing Slotted Shaft 9.53 ± .25 (.375 ± .010) 9.53 ± .25 1 (.375 ± .010) 3 9.53 ± .25 (.375 ± .010) .51 ± .05 DIA. (.020 ± .002) SOLDER PLATED COPPER PINS 3 3 2 5.97 ± .89 (.235 ± .035) 1 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) .391 ± .38 (.154 ± .015) 1 2 3310P-001 4.83 ± .25 (.190 ± .010) 5.18 ± .38 (.204 ± .015) 6.35 ± .08 (.250 ± .003) MOUNTING DIA. COMMON DIMENSIONS 2.54 ± .25 (.100 ± .010) R .76 ± .25 DEEP (.030 ± .010) 5.97 ± .89 (.235 ± .035) 3310R-001 .38 (.015) MIN. STANDOFF 4.78 (.188) 2.54 ± .25 (.100 ± .010) 3310C-101 Plastic Flatted Shaft MOUNTING SURFACE 2.39 (.094) 4.83 (.190) 6.35 ± .08 (.250 ± .003) MOUNTING DIA. 12.70 ± .64 (.500 ± .025) FROM MOUNTING SURFACE 2 3 1 2.54 ± .25 (.100 ± .010) 5.97 ± .89 (.235 ± .035) .51 4 PLACES (.020) MOUNTING HOLE PATTERN 2.54 ± .25 (.100 ± .010) 4.78 (.188) 1.70 ± 0.03 (.067 ± .001) DIA. 4.83 ± .38 (.190 ± .015) .76 ± .05 X .76 HIGH (.030 ± .002 X .030) ANTI-ROTATION BOSS 7.62 (.300) DIA. MOUNTING SURFACE 2.54 ± .25 (.100 ± .010) 2.54 ± .25 (.100 ± .010) ADJUSTMENT SLOT .64 ± .10 WIDE (.025 ± .004) X 2.54 ± .38 (.100 ± .015) 1 9.53 ± .25 (.375 ± .010) 4.75 MIN. FULL (.187) THREAD 6.35 (.250) 12.70 ± .64 (.500 ± .025) 5.97 ± .89 (.235 ± .035) 9.53 ± .25 (.375 ± .010) 3 DIA. 3.18 ± .05 (.125 ± .002) 2.54 ± .25 (.100 ± .010) 5.08 ± .25 (.200 ± .010) 2 1/4-32 UNEF-2A THREADED PLASTIC BUSHING MOUNTING SURFACE .38 (.015) MIN. STANDOFF 2.54 ± .25 (.100 ± .010) 6.53 ± 0.03 (.257 ± .001) DIA. DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3310 – 9 mm Square Sealed Panel Control Product Dimensions Hardware LOCKWASHER H-37-5 7.62 ± .20 DIA. (.300 ± .008) 1/4-32 UNEF-2A THREADED METAL BUSHING MOUNTING SURFACE 6.35 ± .08 (.250 ± .003) MOUNTING DIA. .38 (.015) MIN. STANDOFF 6.5 ± 0.23 (.256 ± .011) 6.35 ± .20 DIA. (.250 ± .008) 10.06 ± 0.31 (.396 ± .012) .38 (.015) MIN. STANDOFF 0.46 ± 0.05 (.018 ± .002) NUT H-38-1 9.53 +0/-0.38 (.375 +0/-.015) 4.83 ± .25 (.190 ± .009) 1/4-32 UNEF .76 (.030) 6.35 (.250) 12.70 ± .64 (.500 ± .025) 6.35 ± .64 (.250 ± .025) R .76 ± .05 X .97 HIGH (.030 ± .002 X .038) ANTI-ROTATION BOSS 2.36 ± 0.25 (.093 ± .01) .51 ± .10 (.020 ± .004) 5.18 ± .64 (.204 ± .025) 5.59 ± .38 (.220 ± .015) DIMENSIONS: 7.62 (.300) DIA. MOUNTING SURFACE .38 (.015) MIN. STANDOFF 30 ° ± 5 ° TYP. 11 +0/-0.43 (.433 +0/-.017) MM (INCHES) .38 (.015) MIN. STANDOFF DIMENSIONS: MM (INCHES) .51 2 PLACES (.020) B C A 5.08 ± .51 (.200 ± .020) NOTE: * Only recommended shaft length for bushingless version Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3310 – 9 mm Square Sealed Panel Control Product Dimensions 3310H-025* COMMON DIMENSIONS 3310H-003 Pot/Switch Dual Cup Plastic Bushing 9.53 ± .25 (.375 ± .010) 3 2 1 .48 (.019) 4 PLCS. B C Pot/Pot Dual Cup Metal Bushing 3 2 1 6 5 4 PRIMARY ELEMENT 5.08 ± .25 (0.20 ± .010) 4 PRIMARY ELEMENT SECONDARY ELEMENT A SWITCH ANTI-ROTATION LUG ANTI-ROTATION LUG 1/4-32 UNEF-2A THREADED PLASTIC BUSHING 3.18 ± .05 (.125 ± .002) DIA. 7.62 ± .20 DIA. (0.30 ± .008) MOUNTING SURFACE .38 (.015) MIN. STANDOFF 1/4-32 UNEF-2A THREADED METAL BUSHING MOUNTING SURFACE 3.18 ± .05 (.125 ± .002) DIA. .76 (.03) 1.14 TYP. (0.045) 7.54 ± .64 (0.297 ± .025) ADJ. SLOT 6 5 2.54 ± .25 (0.10 ± .010) MOUNTING SURFACE .38 (.015) MIN. STANDOFF 7.62 TYP. (0.30) 1 SECONDARY ELEMENT 2.54 ± .25 (0.10 ± .010) .51 ± .05 DIA. (.020 ± .002) TIN PLATED COPPER PINS 3 2 PRIMARY ELEMENT 9.75 ± .38 (.383 ± .015) .38 (.015) MIN. STANDOFF 3310H-002 Pot/Pot Dual Cup Bushingless 5.97 ± .89 (.235 ± .035) 6.35 (0.25) 12.70 ± .64 (0.50 ± .025) .36 ± .10 (0.14 ± .004) 5.97 ± .89 (0.235 ± .035) ADJ. SLOT .64 ± .10 .76 ± .08 WIDE X DEEP (.025 ± .004) (.03 ± .004) 6.35 ± .08 (0.25 ± .003) MOUNTING DIA. Pot/Pot Dual Cup PRIMARY 12.70 ± .64 (0.50 ± .025) 7.62 ± .64 (0.29 ± .025) 5.59 ± .38 (0.220 ± .015) .69 ± .10 .76 ± .08 WIDE X DEEP (.027 ± .004) (.03 ± .004) 6.35 ± .08 MOUNTING DIA. (0.25 ± .003) Pot/Switch Dual Cup 2 PRIMARY 3 CW CCW 1 NOTE: * Only recommended shaft length for bushingless version MM (INCHES) 3 CW CLOCKWISE C COMMON 5 WIPER SECONDARY CCW 4 CLOCKWISE 2 CCW 1 CLOCKWISE DIMENSIONS: 6.35 (0.25) SWITCH CCW A CLOCKWISE 6 CW B CW Pot Single Cup PRIMARY 2 3 CW CCW 1 CLOCKWISE REV. 07/22 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R
3310P-101-203L 价格&库存

很抱歉,暂时无法提供与“3310P-101-203L”相匹配的价格&库存,您可以联系我们找货

免费人工找货