3314J-2-200E

Features ■ Side adjust available ■ Surface Mount / Single Turn / Cermet ■ Meets EIA/EIAJ/IPC/VECI SMD standard Industrial / Sealed ■ Compatible with surface mount manufacturing processes ■ Compatible with popular vacuum pick-and-place equipment ■ J-hook, gull-wing & pinned configurations trimmer designs ■ RoHS compliant* - see processing information on lead free surface mount trimmers ■ For trimmer applications/processing guidelines, click here ■ AEC-Q200 Qualified Grade 1 3314 – 4 mm Square Trimpot® Trimming Potentiometer Additional Information Product Dimensions 3314J-1 Click these links for more information: 4.50 (.177) 2 PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY 4.50 (.177) 2 2.55 (.100) CONTACT Standard Resistance Range ...................... 10 ohms to 2 megohms (see standard resistance table) Resistance Tolerance .............±20 % std. (tighter tolerance available) End Resistance .......1 % or 2 ohms max. (whichever is greater) Contact Resistance Variation ......................................3 % or 3 ohms Resolution..................................... Infinite Insulation Resistance ................ 500 vdc. 100 megohms min. Dielectric Strength Sea Level ............... 500 vac (1 minute) Adjustment Angle................... 210 ° nom. 3 6.30 (.248) 4.50 (.177) 0.20 (.008) TYP. 4.50 (.177) Electrical Characteristics 1 RECOMMENDED PCB LAYOUT 2.35 (.093) 1.0 (.040) 3 PLCS. 2.0 (.079) 3 PLCS. 4.00 TYP. (.157) 2.55 (.100) 0.6 ± 0.1 (.024 ± .004) 3 PLCS. 5.00 (.197) 2.0 (.079) 0.80 (.031) DIA. TYP. 5.00 (.197) 4.50 (.177) 2 2.55 (.100) Power Rating (300 volts max. for Style G, 0.20 (.008) TYP. J & H; 50 volts max. for Style R) 70 °C ..................................... 0.25 watt 125 °C ........................................ 0 watt Temperature Range .... -55 °C to +125 °C Temperature Coefficient .....±100 ppm/°C † Seal Test .... 85 °C Fluorinert /60 seconds Humidity.............................. 90-98 % RH, 10 cycles, 240 hours TRS ±2 %; IR 10 megohms Vibration ...... 20 G TRS ±1 %; VRS ±1 % Shock......... 100 G TRS ±1 %; VRS ±1 % Load Life ... (@ 70 °C Rated Power 1000 Hours) TRS ±3 % Rotational Life.........................100 cycles TRS ±3 % Thermal Shock ..........................5 cycles TRS ±2 %; VRS ±1 % 2.55 (.100) 2.55 (.100) 3314G-1 Environmental Characteristics 0.20 (.008) TYP. 1 4.00 (.157) 1.30 ± 0.1 (.051 ± .004) 5.00 (.197) 3 2.3 (.091) 1.3 (.051) 2 PLCS. 0.8 ± 0.1 (.031 ± .004) 2 PLCS. 5.00 (.197) 5.00 ± 0.10 (.197 ± .004) OUTSIDE WHEN PINS ARE PARALLEL 4.50 (.177) 3 0.6 TYP. (.024) 5° MAX. TYP. 1 2 3 RECOMMENDED PCB 2.35 LAYOUT (.093) 2.3 (.091) 0.8 ± 0.1 1.3 (.031 ± .004) (.051) 2 PLCS. 2 PLCS. 6.20 (.244) 1.3 (.051) 3 PLCS. 5.00 (.197) 1.30 ± 0.1 (.051 ± .004) 5.5 (.217) 3 2.0 (.079) COMMON DIMENSIONS ALL PIN STYLES: STRAIGHT ADJ. SLOT 2.45 LONG (.096) .51 WIDE X (.020) .51 1 3 DEEP X (.020) COMMON DIMENSIONS ALL PIN STYLES: STRAIGHT 2 ADJ. SLOT 2.45 LONG (.096) .51 WIDE X (.020) .51 3 1 DEEP X (.020) DIMENSIONS: TOLERANCES: ± 0.30 (.012) 2 2 COMMON DIMENSIONS ALL PIN STYLES: CROSS ADJ. SLOT 2.41 LONG (.095) .51 WIDE X (.020) .51 1 DEEP X (.020) COMMON DIMENSIONS ALL PIN STYLES: CROSS ADJ. SLOT 2.41 LONG (.095) .51 WIDE X (.020) .51 1 DEEP X (.020) MM (INCHES) EXCEPT WHERE NOTED WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar. 31, 2015 and Annex “Trimpot” is a trademark of Bourns, Inc. †“Fluorinert” is a registered trademark of 3M Co. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 – 4 mm Square Trimpot® Trimming Potentiometer Physical Characteristics Mechanical Angle .................. 240 ° nom. Torque.............................. 180 g-cm max. Stop Strength.................... 300 g-cm min. Pushover Strength (S & Z Style) .................1.6 kilograms (3.5 lbs.) min. Weight ................ Approximately 0.01 oz. Marking .................. Manufacturer’s code, resistance code and date code Wiper ................ 50 % (Actual TR) ±10 % Flammability ...........................U.L. 94V-0 Standard Packaging J, G and R .... 500 pcs./7 ˝ reel (MSL-1) S and Z......... 200 pcs./7 ˝ reel (MSL-1) H..................................... 100 pcs./tube Adjustment Tool ............................... H-90 Product Dimensions 5.00 (.197) 2 6.20 (.244) 2.55 (.100) 0.51 ± 0.13 (.020 ± .005) TYP. 4.50 (.177) 3 1 2.35 (.092) TYP. 0.20 (.008) 1.30 ± 0.10 (.051 ± .004) 0.51 ± 0.12 (.020 ± .005) 3 PLCS. 0.51 ± 0.13 (.020 ± .005) TYP. 4.50 (.177) R 0.13 (.005) MAX. TYP. RECOMMENDED PCB LAYOUT 2.3 (.090) 1.3 (.051) 2 PLCS. DIA. 3.2 (.126) THRU. 5.00 (.197) 6.70 (.264) 0.51 ± 0.13 (.020 ± .005) TYP. 0.80 ± 0.10 (.031 ± .004) 2 PLCS. 6.20 (.244) 5.00 (.197) 2 R 3 1 2.35 (.093) 5 ° MAX. 3 PLCS. 0.80 ± 0.10 (.031 ± .004) 2 PLCS. RECOMMENDED PCB LAYOUT 2.31 (.091) 1.3 (.051) 2 PLCS. DIA. 3.2 (.126) THRUHOLE 5.5 (.216) 0.27 ± 0.10 (.050 ± .004) 2.0 (.079) 1.3 (.051) 2 PLCS. DIMENSIONS: TOLERANCES: ± 0.30 (.012) 0.20 (.008) MAX. 4 PLCS. 6.25 (.246) LEAD FOOTPRINT 2.0 (.079) 1.3 3 PLCS. (.051) MM (INCHES) EXCEPT WHERE NOTED Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 – 4 mm Square Trimpot® Trimming Potentiometer Product Dimensions 2.54 (0.10) 1.27 (0.05) 1 2 1.42 ± 0.13 (0.056 ± 0.005) 5.61 (0.221) 4.5 (0.177) 1.05 (0.041) 3 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 0.61 (.024) 5.01 (.197) 1.42 REF. (.056) 4.95 ± 0.13 (0.193 ± 0.005) 3.13 (0.123) 5.81 ± 0.13 (0.229 ± 0.005) 3.30 (0.130) 1.78 (0.70) 0.50 (.020) 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 ORIENTATION FEATURE RECOMMENDED PCB LAYOUT 3.5 (0.138) 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 1.2 (0.047) 1.1 (0.043) 1.2 (0.047) 1.75 (0.069) 1.15 (0.045) 5.8 (.228) 1.6 (0.063) 1 2 1.15 (0.045) 1.75 (0.069) 3 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 DIMENSIONS: TOLERANCES: ± 0.30 (.012) MM (INCHES) EXCEPT WHERE NOTED Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 – 4 mm Square Trimpot® Trimming Potentiometer Product Dimensions Packaging Specifications 1.27 (0.50) 1 2 TAPE 2.54 (0.10) 1.19 (0.047) 3.32 (0.131) .30 MAX. (.012) 2.74 ± 0.10 (.108 ± .004) 1.29 (0.051) 3 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 DIA. 1.50 + 0.10/ - 0.00 (.059 + .004/ - .000) 0.61 (.024) 5.01 (.197) 5.50 ± 0.5 (.217 ± .020) 4.00 ± 0.10 (.157 ± .004) 5.56 (0.219) 0.96 (.038) 3.08 (0.121) 3.18 (.125) 5.26 ± 0.10 (J) (.207 ± .004) 6.45 ± 0.10 (G) (.254 ± .004) 5.26 ± 0.10 (.207 ± .004) 2.00 ± 0.05 (.079 ± .020) 5.76 (0.227) RECOMMENDED PCB LAYOUT 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 1.3 (0.051) 8.00 ± 0.20 (.315 ± .008) 2.54 (0.10) 0.26 (.010) 3.48 (.137) 2.01 (.079) 2.01 (.079) 2 MIN. 1.50 EQUAL SPACED 3 PLCS. (.059) 20.2 (.795) MIN. DIA. 13.0 ± 0.51 (.512 ± .020) DIA. WIPER 3 1 12.00 ± 0.30 (.472 ± .012) REEL 0.21 (.008) CCW DIA. 1.50 + 0.10/ - 0.00 (.059 + .004/ - .000) 1.75 ± 0.10 (.069 ± .004) 2.01 (.079) CW 50.00 (1.969) MIN. CLOCKWISE 1 2 3 ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 DIMENSIONS: TOLERANCES: ± 0.30 (.012) 18.4 (.724) MAX. (MEASURED AT HUB) MM (INCHES) EXCEPT WHERE NOTED 177.8 ± 2.03 DIA.* (7.00 ± .080) 330.2 ± 2.0 DIA.** (13.00 ± .079) 12.4 + 2.01/ -.000 (.488 + .079/ - .000) (MEASURED AT HUB) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) 1 2 3 Meets EIA specification 481. ROTOR POSITIONED AS SHOWN WITHIN ± 22 ° OF CENTERLINE OF TERMINAL 2 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 – 4 mm Square Trimpot® Trimming Potentiometer Packaging Specifications TAPE TAPE 0.25 ± 0.10 (.010 ± .004) 3.5 ± 0.10 (.138 ± .004) TAPE 0.22 2 PLCS. (.009) 3.5 (.138) 0.33 (.013) 0.50 ± 0.05 (.020 ± .002) 0.3 (.012) 6°±2° 5.52 ± 0.05 (.217 ± .002) 1.50 + 0.10/ - 0.00 (.059 + .004 - .00) DIA. 6.48 ± 0.10 (.255 ± .004) 4.00 ± 0.10 (.157 ± .004) 5.26 ± 0.10 (.207 ± .004) 2.00 ± 0.05 (.079 ± .002) 1.50 + 0.10/ - 0.00 (.059 + .004 - .000) DIA. 16.00 ± 0.3 (.630 ± 0.012) DIA. 1.5 (.059) 7.50 ± 0.10 (.295 ± .004) 4.00 (.157) 1.75 ± 0.10 (.069 ± .004) 2.00 (.079) 8.00 (.315) 1.5 + 0.1/-0.0 (0.59 +.004/-0.0) DIA. 12.00 ± 0.30 (4.72 ± .012) 1.75 (.069) 16.00 (.630) REEL 4.00 ± 0.10 (.157 ± .004) 5.5 8.3 (.217) (.327) 7.5 (.295) 20.2 (.795) MIN. DIA. 1.5 DIA. MIN. (.059) 5.30 ± 0.10 (.209 ± .004) 1.50 EQUAL SPACED 3 PLCS. (.059) 13.0 ± 0.51 (.512 ± .020) DIA. 0.5 TYP. (.020) 12.00 ± 0.10 (.472 ± .004) 2.00 ± 0.10 (.079 ± .004) 1.75 ± 0.10 (.068 ± .004) MIN. R 7.30 (.287) LABEL 18.4 (.724) MAX. (MEASURED AT HUB) REEL MIN. 1.50 EQUAL SPACED 3 PLCS. (.059) 20.2 (.795) MIN. DIA. 13.0 ± 0.51 (.512 ± .020) DIA. 50.00 (1.969) MIN. 178.0 DIA. (7.00) 177.8 ± 2.03 DIA.* (7.00 ± .080) 330.2 ± 2.0 DIA.** (13.00 ± .079) 12.4 + 2.01/ -.000 (.488 + .079/ - .000) (MEASURED AT HUB) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. DIMENSIONS: TOLERANCES: ± 0.30 (.012) 22.4 (.882) MAX. (MEASURED AT HUB) 50.00 (1.969) MIN. MM (INCHES) EXCEPT WHERE NOTED 177.8 ± 2.03 DIA.* (7.00 ± .080) 330.2 ± 2.0 DIA.** (13.00 ± .079) 16.4 + 2.0/ -.000 (.646 + .079/ - .000) (MEASURED AT HUB) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 3314 – 4 mm Square Trimpot® Trimming Potentiometer Packaging Specifications How To Order Standard Resistance Table 3314 J - 1 - 502 E TAPE 0.40 MAX. (.016) 16.00 (.630) 7.5 (.295) 1.75 (.069) 1.50 + 0.10/-0.0 (0.59 +.004/-.0) DIA. 12.00 (.472) 4.00 ± 0.10 (.157 ± .004) 5.50 ± 0.10 (.217 ± .004) 2.00 ± 0.10 (.079 ± .004) DIA. 5.50 ± 0.10 (.217 ± .004) 1.50 MIN. (.059) 5 ° MAX. 5.59 ± 0.10 (.220 ± .004) 1.50 EQUAL SPACED 3 PLCS. (.059) 20.2 (.795) MIN. DIA. 13.0 ± 0.51 (.512 ± .020) DIA. Resistance (Ohms) 10 20 50 100 200 500 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 250,000 500,000 1,000,000 2,000,000 Resistance Code 100 200 500 101 201 501 102 202 502 103 203 503 104 204 254 504 105 205 Popular distribution values listed in boldface. Special resistances available. Tape and reel material meets Antistatic ANSI/ ESD 5541-2003 packaging standards. REEL MIN. Model Style Standard or Modified Product Indicator (Styles J, G, H & S) -1 = Single Slot -2 = Cross Slot -3 = Single Slot w/Reverse Marking -4 = Cross Slot w/Reverse Marking Product Indicator (Style R only) -GM5 = Cross Slot w/Extended Lead Frame -1 = Single Slot -2 = Cross Slot -3 = Single Slot w/Reverse Marking -4 = Cross Slot w/Reverse Marking Product Indicator (Style Z only) -GA4 = Single Slot -1 = Cross Slot -3 = Single Slot w/Reverse Marking -4 = Cross Slot w/Reverse Marking Resistance Code Embossed Tape Designator (MSL-1)** E = Styles J, G and R: 500 pcs. / 7 ˝ reel Styles S and Z: 200 pcs. / 7 ˝ reel G = Styles J and G: 3000 pcs. / 13 ˝ reel Style R: 2500 pcs. / 13 ˝ reel Styles S and Z: 1000 pcs. / 13 ˝ reel **Style H is available in tube packaging only. 22.4 (.882) MAX. (MEASURED AT HUB) 50.00 (1.969) MIN. 177.8 ± 2.03 DIA.* (7.00 ± .080) 330.2 ± 2.0 DIA.** (13.00 ± .079) 16.4 + 2.0/ -.000 (.646 + .079/ - .000) (MEASURED AT HUB) * Embossed Tape Designator "E" ** Embossed Tape Designator "G" (See How To Order chart for further information.) Meets EIA specification 481. DIMENSIONS: TOLERANCES: ± 0.30 (.012) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com MM (INCHES) EXCEPT WHERE NOTED REV. 08/28/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL