4816P-2-333LF

■ RoHS compliant* (see How to Order 4 8 2 LF P 6 1 2 33 8 1 –6 C1 VE *Ro RS HS IO CO NS M AV PL AI IAN LA T BL E Features “Termination” option) ■ Standard EIA package compatible with automatic placement equipment ■ Tape and reel packaging standard ■ Custom circuits are available ■ Compliant leads to reduce solder joint fatiguing ■ Standard electrical schematics: isolated, bussed, dual terminator ■ Now available with improved tolerance to ±0.5 % 4800P Series - Thick Film Surface Mounted Medium Body Environmental Characteristics TESTS PER MIL-STD-202 ...... ∆R MAX. Short Time Overload..................±0.25 % Load Life....................................±1.00 % Moisture Resistance ..................±0.50 % Resistance to Soldering Heat ....±0.25 % Thermal Shock ..........................±0.25 % Physical Characteristics Flammability ........ Conforms to UL94V-0 Lead Frame Material .........................Copper, solder coated Body Material................... Thermoplastic Package Power Temp. Derating Curve 4820P 4818P 4816P 4814P 1.6 1.4 WATTS Product Characteristics Resistance Range ................... 10 ohms to 2.2 megohms Maximum Operating Voltage ...........50 V Temperature Coefficient of Resistance 50 Ω and above..............±100 ppm/°C below 50 Ω .....................±250 ppm/°C TCR Tracking (for equal values within a package) .....50 ppm/°C max. for values > 50 Ω; .............100 ppm/°C for values ≤ 50 Ω Operating Temperature ................................-55 °C to +125 °C Insulation Resistance ........................ 10,000 megohms min. Dielectric Withstanding Voltage ...........................................200 VRMS Lead Solderability .....Meet requirements of MIL-STD-202 Method 208 1.2 5.59 ± .12 (.220 ± .005) 1.0 .8 7.62 ± .25 (.300 ± .010) .6 .4 .2 25 0 70 125 AMBIENT TEMPERATURE ( ϒC ) Package Power Rating at 70 °C 4814P .....................................1.12 watts 4816P .....................................1.28 watts 4818P .....................................1.44 watts 4820P .....................................1.60 watts Typical Part Marking Represents total content. Layout may vary. RoHS COMPLIANCY INDICATOR PART NUMBER CIRCUIT 4816P LF 2-682 CYYWW PIN ONE INDICATOR RESISTANCE CODE COUNTRY OF MANUFACTURE (C = COSTA RICA) Recommended Land Pattern www.P65Warnings.ca.gov 9.91 ± .12 (.390 ± .005) 13.72 ± .12 (.540 ± .005) 11.18 ± .12 (.440 ± .005) 1.27 ± .076 TYP. (.050 ± .003*) .13 + .12/ - .00 (.005 + .005/ - .000) 2.03 ± .12 (.080 ± .005) R = .008" TYP. .305 + .000/ - .101 (.012 + .000/ - .004) 8° MAX. .611 ± .101 (.024 ± .004) Lead coplanarity .102mm (.004 inch) max. at mounting surface. Governing dimensions are in metric. Dimensions in parentheses are inches and are approximate. *Terminal centerline to centerline measurements made at point of emergence of the lead from the body. 2.0 TYP. (.079) 48 16 P - 1 - 103 __ __ WARNING Cancer and Reproductive Harm 12.45 ± .12 (.490 ± .005) .432 ± .076 TYP. (.017 ± .003) DATE CODE MANUFACTURER'S TRADEMARK How To Order Model (48 = SOM Pkg.) Number of Pins Electrical Configuration • 1 or 4 = Isolated* • 2 = Bussed* • 3 = Dual Terminator* Resistance Code • First 2 digits are significant • Third digit represents the number of zeros to follow. Resistance Tolerance • Blank = ±2 % (see “Resistance Tolerance” on next page for resistance range) • F = ±1 % (100 ohms - 1 megohm) • D = ±0.5 % (100 ohms - 1 megohm) Terminations • All electrical configurations EXCEPT T03: LF = RoHS compliant • ONLY electrical configuration T03: L = RoHS compliant • Blank = Tin/Lead-plated *For tube packaging, use T01, T02, T03 or T04. Consult factory for other available options. Product Dimensions 1.27 TYP. (.050) .63 TYP. (.025) 1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 8.9 (.350) SOM-14 8.26 SOM-16 SOM-18 9.53 (.325) 10.80 SOM-20 (.375) (.425) 12.07 (.475) 4.9 (.193) NOTE: Land pattern dimensions are based on design rules established by the Institute for Interconnecting and Packaging Electronic Circuits in IPC-SM-782. For Standard Values Used in Capacitors, Inductors, and Resistors, click here. *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. For information on specific applications, download Bourns’ application notes: ■ DRAM Applications ■ Dual Terminator Resistor Networks ■ R/2R Ladder Networks ■ SCSI Applications 4800P Series - Thick Film Surface Mounted Medium Body Isolated Resistors (1 and 4 Circuits) Model 4814P-1 Model 4816P-1 (Shown) Model 4818P-1 Model 4820P-1 15 16 14 13 12 11 10 Bussed Resistors (2 Circuit) Model 4814P-2 Model 4816P-2 (Shown) Model 4818P-2 Model 4820P-2 9 16 15 14 13 12 11 Dual Terminator (3 Circuit) Model 4814P-3 Model 4816P-3 (Shown) Model 4818P-3 Model 4820P-3 10 16 9 9 R1 R1 1 R2 R3 2 3 R4 4 R5 5 R6 6 R7 7 R8 8 R1 Model 4816P-4 (Shown) Model 4820P-4 16 15 14 R8 R1 1 13 12 R7 3 11 10 R6 R2 2 1 5 R14 R13 R12 R11 R10 R9 R2 R3 R4 R5 R6 R7 R8 3 4 5 6 7 8 R1 R2 R1 R1 R2 R2 R1 R2 R2 R1 R1 R2 R1 R2 R1 R2 R1 R2 R1 R2 R1 R1 R2 R2 R2 R1 R2 1 9 8 R5 R3 4 2 R15 R4 6 7 8 Resistance Tolerance 10 ohms to 49 ohms ................... ±1 ohm 50 ohms to 2.2 megohms ............. ±2 %* Power Rating per Resistor 1 Circuit at 70 °C .................. 0.160 watt 4 Circuit at 70 °C .................. 0.160 watt Resistance Tolerance 10 ohms to 49 ohms ................... ±1 ohm 50 ohms to 2.2 megohms ............. ±2 %* Power Rating per Resistor 2 Circuit at 70 °C .................. 0.080 watt Resistance Tolerance Below 100 ohms ...................... ±2 ohms 100 ohms to 2.2 megohms ........... ±2 %* Power Rating per Resistor 3 Circuit at 70 °C .................. 0.080 watt Resistor Power Temp. Derating Curve Resistor Power Temp. Derating Curve Resistor Power Temp. Derating Curve .225 .225 .200 .200 .200 .175 .175 .175 .150 .150 .150 WATTS WATTS WATTS .225 .125 .125 .125 .100 .100 .100 .075 .075 .075 .050 .050 .050 .025 .025 0 25 70 AMBIENT TEMPERATURE (°C) .025 25 0 125 70 125 Code 100 220 270 330 390 470 560 680 820 101 121 151 Ohms 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 Code 181 221 271 331 391 471 561 681 821 102 122 152 25 Ohms 1,800 2,000 2,200 2,700 3,300 3,900 4,700 5,600 6,800 8,200 10,000 12,000 Code 182 202 222 272 332 392 472 562 682 822 103 123 Ohms 15,000 18,000 20,000 22,000 27,000 33,000 39,000 47,000 56,000 68,000 82,000 100,000 70 125 AMBIENT TEMPERATURE ( °C ) Popular Resistance Values (3 Circuit)** Popular Resistance Values (1, 4 and 2 Circuits)** Ohms 10 22 27 33 39 47 56 68 82 100 120 150 0 AMBIENT TEMPERATURE ( °C ) Code 153 183 203 223 273 333 393 473 563 683 823 104 Ohms 120,000 150,000 180,000 220,000 270,000 330,000 390,000 470,000 560,000 680,000 820,000 1,000,000 Code 124 154 184 224 274 334 394 474 564 684 824 105 * Add “F” after resistance code for ±1 % tolerance available from 100 Ω through 1M Ω, or add “D” after resistance code for ±0.5 % tolerance available from 100 Ω through 1M Ω. Part number suffix examples: -103 = 10K Ω, ±2 %; -103F = 10K Ω, ±1 %; -103D = 10K Ω, ±0.5 % ** Non-standard values available, within resistance range. Resistance Ohms R1 160 180 220 220 330 330 3,000 Code R2 240 390 270 330 390 470 6,200 R1 161 181 221 221 331 331 302 R2 241 391 271 331 391 471 622 REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Surface Mount Ordering Guide *Circuit Codes Electrical Configuration Tape & Reel Tubes Isolated 1 T01 Bussed 2 T02 Dual Terminated 3 T03 Adj. Isolated 4 T04 Examples 4816P-1-101 Isolated Circuit in Tape & Reel Package 4816P-T01-101 Isolated Circuit in Slide Tube Package *4816P-X-RC: To specify package type, replace “X” with appropriate “Circuit Code”. W F POLYSTYRENE REEL (ANTI-STATIC) DIRECTION OF FEED T 1.5 + .10/ - .00 (.059 + .004/ - .00) DIA. 1.5 (.059) MIN. 20.2 MIN. (.795) 1.5 MIN. DIA. (.059) 4.0 ± .10 (.157 ± .004) 13.0 ± .20 (.512 ± .008) 12.0 ± .10 (.472 ± .004) CARRIER TAPE STATIC DISSIPATIVE 330.2 MAX. (13.0) COVER TAPE (ANTISTATIC) NOTE: DIMENSIONS NOT SPECIFIED ARE PER EIA RS-481-2. DIMENSIONS: Model MM (IN) V Standard Quantity per Reel Carrier Tape Width (W) Cover Tape Width (W) Reel Width (T) Pocket Center (F) 2,000 24.0 ± .30 (.945 ± .012) 21.0 (.827) NOM. 30.4 MAX. (1.197) 11.5 ± .10 (.453 ± .004) 4814P 4816P 4818P 4820P Leader Length = 500 min. Trailer Length = 500 mm min. } Empty Component Pockets Sealed with Cover Tape Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL