oH
an S C
d OM
** P
*A LI
EC AN
-Q T,*
10 *H
1 AL
CO O
M GE
PL N
IA FR
NT EE
Features
Applications
n Surface mount SMC package
n Protection of I/O interfaces
n Standoff voltage: 5 to 170 volts
n Overvoltage transient protection
n Peak Pulse Power: 5000 watts
n Telecom, computer, industrial and
consumer electronics applications
*R
n RoHS compliant* and halogen free**
n AEC-Q101 compliant***
n Protection of power buses
n UL Recognized
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
General Information
Agency Recognition
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection
applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage
Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V
and Breakdown Voltage up to 189 V. Typical fast response times are less than 1.0 ps from
0 V to Breakdown Voltage.
Description
UL
File Number: E153537
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick
and place equipment and the flat configuration minimizes roll away.
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Parameter
Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2)
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3,4)
Steady State Power Dissipation @ TL = 50 °C
Maximum Instantaneous Forward Voltage @ IPP = 100 A
(For Unidirectional Units Only)
Operating Temperature Range
Storage Temperature Range
Symbol
Value
Unit
PPK
5000
Watts
IFSM
300
Amps
PM(AV)
6.5
Watts
VF
5
Volts
TJ
-55 to +150
°C
-55 to +150
°C
TSTG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal.
How to Order
5.0SMDJ 12 CA - Q
Asia-Pacific:
Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
Europe:
Tel: +36 88 885 877 • Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
Package
5.0SMDJ = SMC/DO-214AB
Working Peak Reverse Voltage
12 = 12 VRWM (Volts)
Suffix
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
AEC-Q101 Compliant Suffix
Q = AEC-Q101 Compliant, 3000 pcs. per 13-inch Reel
QH = AEC-Q101 Compliant, 500 pcs. per 7-inch Reel
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
*** Q suffix for automotive and other applications requiring appropriate AEC-Q101 compliance for electronic limiters.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Unidirectional Device
Part
Number
Part
Marking
Bidirectional Device
Part
Number
Part
Marking
5.0SMDJ5.0A-Q 5RDEQ 5.0SMDJ5.0CA-Q
5DDEQ
5.0SMDJ6.5A-Q 5RDKQ 5.0SMDJ6.5CA-Q
5DDKQ
5.0SMDJ7.5A-Q 5PDPQ 5.0SMDJ7.5CA-Q
5DDPQ
Max.
Max.
Reverse
Reverse Clamping
Breakdown Voltage
Voltage
Standoff
Leakage
VBR (Volts)
@ Ipp
Voltage
@ VRWM
Max.
Peak
Pulse
Current
VRWM
(V)
(8/20 µs)
(8/20 µs)
@ IT
(mA)
Vc
(V)
Ipp
(A)
Vc
(V)
Ipp
(A)
6.0
9.2
543.6
12.0
4077.0
11.2
446.5
14.6
3348.8
Min.
6.40
Max.
7.00
10
5.0SMDJ6.0A-Q 5RDGQ 5.0SMDJ6.0CA-Q 5DDGQ
6.67
7.37
10
5.0SMDJ7.0A-Q 5PDMQ 5.0SMDJ7.0CA-Q 5DDMQ
7.78
8.60
10
7.22
8.33
5.0SMDJ8.0A-Q 5PDRQ 5.0SMDJ8.0CA-Q
5DDRQ
5.0SMDJ9.0A-Q 5PDVQ 5.0SMDJ9.0CA-Q
5DDVQ
10.00
5DDZQ
12.20
5.0SMDJ8.5A-Q 5PDTQ
5.0SMDJ10A-Q
5.0SMDJ11A-Q
5.0SMDJ12A-Q
5.0SMDJ8.5CA-Q
5PDXQ 5.0SMDJ10CA-Q
5PDZQ 5.0SMDJ11CA-Q
5PEPQ 5.0SMDJ12CA-Q
5DDTQ
5DDXQ
5BEPQ
5.0SMDJ13A-Q
5PEQQ 5.0SMDJ13CA-Q
5BEQQ
5.0SMDJ15A-Q
5PESQ 5.0SMDJ15CA-Q
5BESQ
5.0SMDJ14A-Q
5.0SMDJ16A-Q
5PERQ 5.0SMDJ14CA-Q
5PETQ
5.0SMDJ16CA-Q
5BERQ
5BETQ
5.0SMDJ17A-Q
5PEUQ 5.0SMDJ17CA-Q
5BEUQ
5.0SMDJ20A-Q
5PEWQ 5.0SMDJ20CA-Q
5BEWQ
5PEZQ
5BEZQ
5.0SMDJ18A-Q
5.0SMDJ22A-Q
5.0SMDJ24A-Q
5.0SMDJ26A-Q
5PEVQ 5.0SMDJ18CA-Q
5PEXQ 5.0SMDJ22CA-Q
5.0SMDJ24CA-Q
5PFEQ
5.0SMDJ26CA-Q
5PFKQ
5.0SMDJ30CA-Q
5PFPQ
5.0SMDJ36CA-Q
5PFTQ
5.0SMDJ43CA-Q
5PFXQ
5.0SMDJ48CA-Q
8.89
9.44
11.10
13.30
14.40
15.60
16.70
17.80
18.90
7.98
9.21
9.83
10.40
1
12.30
14.70
15.90
17.20
18.50
19.70
20.90
5BEXQ
24.40
26.90
26.70
1
13.50
22.10
28.90
1
1
20.00
5BFEQ
1
11.10
5BEVQ
22.20
10
24.50
29.50
1
1
1
1
1
1
1
1
1
1
1
IR
(μA)
5.0
1050
6.5
750
7.0
7.5
8.0
8.5
1050
10.3
300
12.0
70
13.6
150
30
9.0
12
11.0
2
10.0
12.0
13.0
14.0
15.0
16.0
17.0
18.0
20.0
22.0
24.0
6
2
2
2
2
2
2
2
2
2
2
5PFRQ
5.0SMDJ40CA-Q
5BFRQ
5.0SMDJ45A-Q
5PFVQ
5.0SMDJ45CA-Q
5BFVQ
5.0SMDJ51A-Q
5PFZQ
5.0SMDJ51CA-Q
5BFZQ
56.70
62.70
1
51.0
2
64.40
71.20
1
58.0
2
78.60
1
64.0
33.0
2
2
45.4
53.3
110.0
93.9
17.7
18.7
20.0
22.1
23.7
25.9
28.0
30.2
3126.0
2907.8
2757.8
2604.8
2436.0
2206.5
2061.0
1890.0
1747.5
1620.0
31.7
1537.5
35.9
1357.5
33.8
1447.5
38.0
1290.0
46.2
1057.5
54.7
892.5
42.1
50.6
59.0
62.9
69.3
1162.5
967.5
825.0
772.5
704.3
1
36.0
2
58.1
86.1
75.5
645.8
5BFTQ
47.80
52.80
1
43.0
2
69.4
72.1
90.2
540.8
5BFXQ
5BGEQ
5.0SMDJ64A-Q
5PGMQ 5.0SMDJ64CA-Q
5BGMQ
5.0SMDJ75A-Q
5PGRQ 5.0SMDJ75CA-Q
5BGRQ
5.0SMDJ85A-Q
5PGVQ 5.0SMDJ85CA-Q
5BGVQ
Note:
1. ‘Q’ suffix denotes AEC-Q101 compliance.
1
28.0
16.8
44.20
5BGGQ
5PGTQ 5.0SMDJ78CA-Q
1
119.0
15.6
3641.3
40.00
5PGGQ 5.0SMDJ58CA-Q
5.0SMDJ78A-Q
129.0
13.4
5BFPQ
5.0SMDJ58A-Q
5PGPQ 5.0SMDJ70CA-Q
141.0
103.0
5.0SMDJ40A-Q
5.0SMDJ70A-Q
172.0
155.0
48.4
40.60
5PGKQ 5.0SMDJ60CA-Q
38.9
193.0
181.0
2
36.70
5.0SMDJ60A-Q
35.5
216.0
205.0
30.0
5BFMQ
5RGEQ 5.0SMDJ54CA-Q
29.2
32.4
252.0
233.0
1
5PFMQ 5.0SMDJ33CA-Q
5.0SMDJ54A-Q
26.0
27.6
294.2
274.8
36.80
5.0SMDJ33A-Q
5.0SMDJ48A-Q
23.2
24.4
347.3
324.8
42.1
34.40
5.0SMDJ43A-Q
19.9
21.5
367.7
2
31.10
5.0SMDJ36A-Q
17.0
18.2
387.7
26.0
5BFGQ
33.30
14.4
15.4
416.8
1
5PFGQ 5.0SMDJ28CA-Q
5BFKQ
12.9
485.5
31.90
5.0SMDJ28A-Q
5.0SMDJ30A-Q
(10/1000 µs) (10/1000 µs)
Max.
Max.
Clamping
Peak
Voltage
Pulse
@ Ipp
Current
5BGKQ
5BGPQ
5BGTQ
44.40
50.00
53.30
60.00
66.70
71.10
77.80
83.30
86.70
49.10
55.30
58.90
66.30
73.70
86.00
92.10
95.80
94.40 104.00
1
1
1
1
1
1
1
1
1
40.0
45.0
48.0
54.0
60.0
70.0
75.0
78.0
85.0
2
2
2
64.5
72.7
77.4
68.8
64.7
83.9
94.5
100.6
60.7
107.1
93.6
53.5
121.7
2
103.0
48.6
133.9
2
121.0
2
137.0
2
2
2
2
82.4
77.6
87.1
96.8
113.0
126.0
57.5
51.7
44.3
41.4
39.7
36.5
113.2
125.8
146.9
157.3
163.8
178.1
582.0
516.0
485.3
455.3
431.3
401.3
387.8
364.5
332.3
310.5
297.8
273.8
Continued on next page
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) - Continued
Unidirectional Device
Breakdown Voltage
VBR (Volts)
Bidirectional Device
Part
Number
Part
Marking
5.0SMDJ90A-Q
5PGXQ
100.00
5.0SMDJ110A-Q
5PHEQ
122.00
5PHKQ
144.00
5.0SMDJ100A-Q
5PHGQ
5.0SMDJ150A-Q
5PHMQ
5.0SMDJ170A-Q
5PHRQ
5.0SMDJ160A-Q
Part
Marking
5PGZQ
5.0SMDJ120A-Q
5.0SMDJ130A-Q
Part
Number
Min.
111.00
111.00
123.00
133.00
147.00
167.00
5PHPQ
Max.
178.00
189.00
Max.
Max.
Max.
Max.
Maximum
Peak
Peak
Reverse Clamping Pulse Clamping
Voltage
Voltage
Pulse
Current
Leakage
@ Ipp
@ Ipp
Current
(10/1000
@ VRWM
(8/20 µs)
(10/1000 µs)
µs)
(8/20 µs)
Vc
(V)
Ipp
(A)
Vc
(V)
Ipp
(A)
2
146.0
34.3
189.8
257.3
2
177.0
28.3
230.1
212.3
@ IT
(mA)
VRWM
(V)
IR
(μA)
1
100.0
2
1
120.0
1
150.0
1
135.00
1
159.00
1
185.00
197.00
26.0
209.0
2
24.0
243.0
2
170.0
30.9
193.0
2
160.0
1
162.0
2
130.0
1
209.00
90.0
110.0
A
Product Dimensions
Reverse
Standoff
Voltage
20.6
259.0
2
19.3
275.0
18.2
210.6
250.9
271.7
315.9
336.7
357.5
231.8
195.0
180.0
154.5
144.8
136.5
Recommended Footprint
A
A
A
B
C
B
B
C
B
C
CATHODE BAND
(UNIDIRECTIONAL DEVICES ONLY)
G
CATHODE BAND
(UNIDIRECTIONAL DEVICES ONLY)
G
C
Dimension
A (Max.)
B (Min.)
F
H
F
H
D
E
D
DIMENSIONS:
E
Dimension
SMC (DO-214AB)
6.60 - 7.11 MM
A
DIMENSIONS:
(0.260
- 0.280)(INCHES)
5.59 - 6.22
MM
B DIMENSIONS:
(0.220 - 0.245)
(INCHES)
2.90 - 3.20
C
(0.114 - 0.126)
0.15 - 0.31
D
(0.006 - 0.012)
7.75 - 8.13
E
(0.305 - 0.320)
0.20
MAX.
F
(0.008)
2.01 - 2.62
G
(0.080 - 0.103)
0.76 - 1.52
H
(0.030 - 0.060)
DIMENSIONS:
C (Min.)
SMC (DO-214AB)
4.69
(0.185)
3.07
(0.121)
1.53
(0.060)
MM
(INCHES)
Physical Specifications
Encapsulation..............................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
Environmental Specifications
Moisture Sensitivity Level.................................................................1
ESD Classification (HBM)............................................................. 3B
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
5.0SMDJ-Q Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve
Maximum Non-Repetitive Surge Current
Peak Forward Surge Current (Amps)
Peak Pulse Derating in Percent of
Peak Power or Current
100
75
50
25
10 x 1000 Waveform as Defined
by R.E.A.
0
25
0
75
50
100
125
150
175
300
250
200
150
100
300 A at 1 cycle
100 A at 80 cycles
50
0
1
200
2
5
Junction Temperature (°C)
Pulse Waveform
CJ - Junction Capacitance (pF)
IP, Peak Pulse Current (%)
Half value=
IRSM
2
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
50
10 x 1000 waveform
as defined by R.E.A.
TA=25 °C
TP
100
0
2.0
1.0
3.0
Bidirectional v=0v
Unidirectional v=0v
10000
1000
100
Bidirectional
@ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
4.0
Unidirectional
@ VR
1
10
T, Time (ms)
100
1000
VBR - Reverse Breakdown Voltage (V)
Pulse Rating Curve
Steady State Power Derating Curve
1000
6.5
TA = 25 °C
PM(AV) Steady State Power Dissipation (W)
P PPM - Peak Pulse Power (kW)
50
100000
Peak value (IRSM)
100
20
Typical Junction Capacitance
TR=10 µs
0
10
Number of Cycles at 60 Hz
100
10
1
8.0 x 8.0 mm
(0.31 x 0.31 in.)
Copper Pad Areas
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
t d - Pulse Width (sec.)
10 ms
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
60 Hz Resistive or
Inductive Load
0
25
50
75
100
125
150
175
200
TL, Lead Temperature (°C)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
5.0SMDJ-Q Transient
Voltage Suppressor
Diode Series
CDDFN5-0504N
- TVS/Steering
Diode Array
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).
P
0
P
1
d
T
E
Index Hole
120 °
F
D2
W
B
D1 D
P
Trailer
.......
.......
End
A
Unidirectional
Product
Orientation
C
Device
.......
.......
.......
.......
Leader
.......
.......
10 pitches (min.)
DIMENSIONS:
MM
(INCHES)
10 pitches (min.)
Direction of Feed
Item
Symbol
Carrier Width
A
Carrier Length
B
Carrier Depth
C
Sprocket Hole
d
Reel Outside Diameter
D
Reel Inner Diameter
D1
Feed Hole Diameter
D2
Sprocket Hole Position
E
Punch Hole Position
F
Punch Hole Pitch
P
Sprocket Hole Pitch
P0
Embossment Center
P1
Overall Tape Thickness
T
Tape Width
W
Reel Width
W1
Quantity per Reel
REV. 03/20
W1
Start
--
Devices are packed in accordance with EIA standard
EIA-481-D and specifications shown here.
SMC (DO-214AB)
7-Inch Reel
13-Inch Reel
6.0 ± 0.20
(0.236 ± 0.079)
8.3 ± 0.20
(0.327 ± 0.008)
2.5 ± 0.20
(0.098 ± 0.008)
1.50 ± 0.10
(0.059 ± 0.004)
178
330
(7.008)
(12.992)
50.0
MIN.
(1.969)
13.0 +0.50/-0.20
(0.512 +0.020/-0.008)
1.75 ± 0.10
(0.069 ± 0.004)
7.50 ± 0.10
(0.295 ± 0.004)
8.00 ± 0.10
(0.315 ± 0.004)
4.00 ± 0.10
(0.157 ± 0.004)
2.00 ± 0.10
(0.079 ± 0.004)
0.30± 0.10
(0.012 ± 0.004)
16.00 ± 0.30
(0.630 ± 0.012)
22.4
MAX.
(0.882)
500
3,000
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R