PL
IA
N
T
Features
OM
n RoHS compliant* and halogen free**
*R
oH
S
C
n Surface mount SMC package
n Standoff voltage: 12 to 170 volts
n Peak Pulse Power: 5000 watts
LE
AD
F
RE
E
n Typical temperature coefficient:
DVBR = 0.1 % x VBR @ 25 °C x DT
5.0SMDJ Transient Voltage Suppressor Diode Series
General Information
Ro VE LEA
HS RS D
C ION FRE
OM S E
PL AR
IA E
NT
*
Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly
higher power density circuit protection components.
Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC)
size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 12 V up to 170 V and Breakdown
Voltage up to 209 V. Typical fast response times are less than 1.0 ps from 0 V to Breakdown Voltage.
Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration
minimizes roll away.
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Parameter
Minimum Peak Pulse Power Dissipation (Tp = 1 ms) (Note 1,2)
Peak Forward Surge Current
8.3 ms Single Half Sine Wave Superimposed on Rated Load
(JEDEC Method) (Note 3,4)
Steady State Power Dissipation @ TL = 50 °C
Maximum Instantaneous Forward Voltage @ IPP = 100 A
(For Unidirectional Units Only)
Operating Temperature Range
Storage Temperature Range
Symbol
Value
Unit
PPK
5000
Watts
IFSM
300
Amps
PM(AV)
6.5
Watts
VF
5
Volts
TJ
-55 to +150
°C
-55 to +150
°C
TSTG
1. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve.
2. Thermal Resistance Junction to Lead.
3. 8.3 ms Single Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only).
4. Mounted on 8.0 mm x 8.0 mm copper pad area to each terminal.
How to Order
5.0SMDJ 12 CA - H
Asia-Pacific:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Europe:
Tel: +36 88 520 390
Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
Package
5.0SMDJ = SMC/DO-214AB
Working Peak Reverse Voltage
12 = 12 VRWM (Volts)
Suffix
A = 5 % Tolerance Unidirectional Device
CA = 5 % Tolerance Bidirectional Device
Reel
(Blank) = 13-inch Reel
-H = 7-inch Reel
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
**Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br)
and Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
5.0SMDJ Transient Voltage Suppressor Diode Series
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Unidirectional Device
Part
Number
5.0SMDJ12A
Part
Marking
5PEP
Bidirectional Device
Part
Number
5.0SMDJ12CA
VRWM (V)
IR (μA)
VC (V)
IPP (A)
5BEP
13.3
14.7
1
12
2
19.9
252.0
5BER
14.4
15.6
17.2
1
14
2
23.2
216.0
5.0SMDJ15A
5PES
5.0SMDJ15CA
5BES
5PET
5.0SMDJ16CA
193.0
5BEV
20.0
22.1
1
18
2
29.2
172.0
5BEW
5.0SMDJ24A
5PEZ
5.0SMDJ24CA
5BEZ
5.0SMDJ28A
5PFG
5.0SMDJ28CA
5BFG
5.0SMDJ33A
5PFM
5.0SMDJ33CA
5BFM
5.0SMDJ40A
5PFR
5.0SMDJ40CA
5BFR
5.0SMDJ45A
5PFV
5.0SMDJ45CA
5BFV
5.0SMDJ51A
5PFZ
5.0SMDJ30A
5.0SMDJ36A
5.0SMDJ43A
5.0SMDJ48A
5.0SMDJ54A
5PFE
5PFK
5.0SMDJ30CA
5PFP
5.0SMDJ36CA
5PFT
5PFX
5PGE
5.0SMDJ58A
5PGG
5.0SMDJ64A
5PGM
5.0SMDJ75A
5PGR
5.0SMDJ85A
5PGV
5.0SMDJ100A
5PGZ
5.0SMDJ60A
5.0SMDJ70A
5.0SMDJ78A
5.0SMDJ90A
5.0SMDJ110A
5PGK
5PGP
5PGT
5.0SMDJ48CA
22.2
5PHR
2
27.6
32.4
22
2
35.5
5BFE
28.9
31.9
1
26
2
42.1
26.7
31.1
29.5
34.4
1
1
24
28
2
2
38.9
45.4
181.0
155.0
141.0
129.0
119.0
110.0
5BFK
33.3
36.8
1
30
2
48.4
103.0
5BFP
40.0
44.2
1
36
2
58.1
86.1
5BFT
47.8
52.8
1
43
2
69.4
72.1
5BFX
36.7
44.4
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
40.6
49.1
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
1
1
1
1
1
1
1
1
1
1
1
1
40
45
48
51
54
58
60
64
70
75
78
104.0
111.0
123.0
1
100
133.0
147.0
1
120
1
150
167.0
178.0
189.0
111.0
135.0
159.0
185.0
197.0
209
1
33
94.4
144.0
5.0SMDJ170A
20
2
1
5PHK
5PHP
1
17
26.9
122.0
5PHM
24.5
1
24.4
5PHE
5.0SMDJ150A
20.9
5BEX
100.0
5PHG
5.0SMDJ160A
5.0SMDJ43CA
18.9
5PGX
5.0SMDJ120A
5.0SMDJ130A
5.0SMDJ26CA
205.0
26.0
5.0SMDJ20CA
5.0SMDJ26A
24.4
233.0
2
5PEW
5.0SMDJ22CA
2
21.5
16
5.0SMDJ20A
5PEX
15
2
1
5BEU
5.0SMDJ22A
1
13
19.7
5.0SMDJ17CA
5.0SMDJ18CA
18.5
1
17.8
5PEU
5PEV
16.7
15.9
5BET
5.0SMDJ17A
5.0SMDJ18A
Peak
Pulse
Current
@ IT (mA)
5BEQ
5.0SMDJ16A
Maximum
Clamping
Voltage
@ IPP
Max.
5.0SMDJ13CA
5.0SMDJ14CA
Maximum
Reverse
Leakage
@ VRWM
Min.
5PEQ
5PER
Reverse
Standoff
Voltage
Part
Marking
5.0SMDJ13A
5.0SMDJ14A
Breakdown Voltage
VBR (Volts)
1
1
1
1
1
85
2
2
2
2
2
2
2
2
53.3
64.5
72.7
77.4
82.4
87.1
93.6
96.8
2
103.0
2
121.0
2
137.0
2
2
113.0
126.0
93.9
77.6
68.8
64.7
60.7
57.5
53.5
51.7
48.6
44.3
41.4
39.7
36.5
90
2
146.0
34.3
110
2
177.0
28.3
130
160
170
2
2
2
2
2
2
162.0
193.0
209.0
243.0
259.0
275.0
30.9
26.0
24.0
20.6
19.3
18.2
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
5.0SMDJ Transient Voltage Suppressor Diode Series
A
Product Dimensions
Recommended Footprint
A
A
B
C
B
B
A
C
G
Dimension
C
CATHODE BAND
(UNIDIRECTIONAL DEVICES ONLY)
A (Max.)
B (Min.)
G
F
H
D
C (Min.)
E
H
F
DIMENSIONS:
Dimension
SMC
MM (DO-214AB)
DIMENSIONS:
(INCHES)
6.60 - 7.11
A
(0.260 - 0.280)
5.59 - 6.22
B
(0.220 - 0.245)
2.90 - 3.20
C
(0.114 - 0.126)
0.15 - 0.31
D
(0.006 - 0.112)
7.75 - 8.13
E
(0.305 - 0.320)
0.05 - 0.20
F
(0.002 - 0.008)
2.01 - 2.62
G
(0.080 - 0.103)
0.76 - 1.52
H
(0.030 - 0.060)
DIMENSIONS:
SMC (DO-214AB)
4.69
(0.185)
3.07
(0.121)
1.53
(0.060)
DIMENSIONS:
D
E
C
B
CATHODE BAND
(UNIDIRECTIONAL DEVICES ONLY)
MM
(INCHES)
MM
(INCHES)
Physical Specifications
Encapsulation..............................Molded plastic per UL Class 94V-0
Polarity....................... Cathode band indicates unidirectional device
No cathode band indicates bidirectional device
Environmental Specifications
Moisture Sensitivity Level.................................................................1
ESD Classification (HBM)............................................................. 3B
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
5.0SMDJ Transient Voltage Suppressor Diode Series
Rating & Characteristic Curves
Pulse Derating Curve
Maximum Non-Repetitive Surge Current
Peak Forward Surge Current (Amps)
Peak Pulse Derating in Percent of
Peak Power or Current
100
75
50
25
10 x 1000 Waveform as Defined
by R.E.A.
0
25
0
75
50
100
125
150
175
300
250
200
150
100
300 A at 1 cycle
100 A at 80 cycles
50
0
1
200
2
5
Junction Temperature (°C)
Pulse Waveform
CJ - Junction Capacitance (pF)
IP, Peak Pulse Current (%)
Half value=
IRSM
2
Pulse width (TP)
is defined as that point
where the peak current
decays to 50 % of IPSM.
50
10 x 1000 waveform
as defined by R.E.A.
TA=25 °C
TP
100
0
2.0
1.0
3.0
Bidirectional v=0v
Unidirectional v=0v
10000
1000
100
Bidirectional
@ VR
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
4.0
Unidirectional
@ VR
1
10
T, Time (ms)
100
1000
VBR - Reverse Breakdown Voltage (V)
Pulse Rating Curve
Steady State Power Derating Curve
1000
6.5
TA = 25 °C
PM(AV) Steady State Power Dissipation (W)
P PPM - Peak Pulse Power (kW)
50
100000
Peak value (IRSM)
100
20
Typical Junction Capacitance
TR=10 µs
0
10
Number of Cycles at 60 Hz
100
10
1
8.0 x 8.0 mm
(0.31 x 0.31 in.)
Copper Pad Areas
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
t d - Pulse Width (sec.)
10 ms
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
60 Hz Resistive or
Inductive Load
0
25
50
75
100
125
150
175
200
TL, Lead Temperature (°C)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
CDDFN5-0504N
- TVS/Steering
Diode Diode
Array Series
5.0SMDJ Transient
Voltage Suppressor
Packaging Information
The product will be dispensed in tape and reel format (see diagram below).
P
0
P
1
d
T
E
Index Hole
120 °
F
B
D1 D
P
A
Trailer
End
D2
W
.......
.......
C
Device
.......
.......
.......
.......
Leader
.......
.......
10 pitches (min.)
DIMENSIONS:
MM
(INCHES)
10 pitches (min.)
Direction of Feed
Item
Symbol
Carrier Width
A
Carrier Length
B
Carrier Depth
C
Sprocket Hole
d
Reel Outside Diameter
D
Reel Inner Diameter
D1
Feed Hole Diameter
D2
Sprocket Hole Position
E
Punch Hole Position
F
Punch Hole Pitch
P
Sprocket Hole Pitch
P0
Embossment Center
P1
Overall Tape Thickness
T
Tape Width
W
Reel Width
W1
Quantity per Reel
09/17
W1
Start
--
Devices are packed in accordance with EIA standard
EIA-481-D and specifications shown here.
SMC (DO-214AB)
7-Inch Reel
13-Inch Reel
6.0 ± 0.20
(0.236 ± 0.079)
8.3 ± 0.20
(0.327 ± 0.008)
2.5 ± 0.20
(0.098 ± 0.008)
1.50 ± 0.10
(0.059 ± 0.004)
178
330
(7.008)
(12.992)
50.0
MIN.
(1.969)
13.0 +0.50/-0.20
(0.512 +0.020/-0.008)
1.75 ± 0.10
(0.069 ± 0.004)
7.50 ± 0.10
(0.295 ± 0.004)
8.00 ± 0.10
(0.315 ± 0.004)
4.00 ± 0.10
(0.157 ± 0.004)
2.00 ± 0.10
(0.079 ± 0.004)
0.30± 0.10
(0.012 ± 0.004)
16.00 ± 0.30
(0.630 ± 0.012)
22.4
MAX.
(0.882)
500
3,000
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
PRELIMINARY
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
its affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information before placing orders and should verify that
such information is current and complete.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to a combination of the Bourns® product with other components in
the user’s application or due to the environment of the user application itself. Such characteristics and parameters also can
and do vary in different applications and actual performance may vary over time. Users should always verify actual performance
of the Bourns® product in their specific devices and applications, and make their own independent judgments about how
much additional test margin to design in to compensate for differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet such industry standard requirements or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, military, lifesaving, life-critical or life
sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or
severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns
representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications is at the user’s sole
risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns® standard products that are designed and tested for use in automotive applications will be described on the applicable
data sheets as compliant with the applicable AEC-Q standard. Use of any other Bourns® standard products in an automotive
application is not recommended, authorized or intended and will be at the user’s sole risk.
Bourns® standard products are not tested to comply with the United States Federal Aviation Administration or any other
generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft
or space applications. Bourns® standard products that are designed and tested for use in aircraft or space applications will
be described on the applicable data sheets as compliant with the RTCA DO-160 standard. Use of any other Bourns® standard
product in an aircraft or space application is not recommended, authorized or intended and will be at the user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns
and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns
and the user regarding the use and level of testing, the provisions above applicable to Bourns® standard products shall also
apply to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor use Bourns®
products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply
to all uses and applications that violate national or international prohibitions, including embargos or international regulations.
Further, Bourns® products, technology or technical data may not under any circumstance be exported or re-exported to
countries subject to international sanctions or embargoes and Bourns® products may not, without prior authorization from
Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party that is ineligible to receive U.S.
commodities, software, or technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability arising out of the application or
use of any Bourns® standard product, (ii) any and all liability, including, without limitation, special, punitive, consequential
or incidental damages, and (iii) any and all implied warranties, including implied warranties of fitness for particular purpose,
non-infringement and merchantability.
C1753 08/17