7004-02-YH-A2-R1

Features ■ ■ Expands to add POTS lines, DSL or both Manufactured from high-impact resistant, ultraviolet desensitized, flame retardant, UL Recognized plastic Optional sealed switching jacks with Insulation Displacement Connectors (IDCs) Subscriber lockable with Telco override Convenient ground attachment UL Listed per UL 497 (File: E53117) ® ■ ■ ■ ■ 7004 Series - Network Interface Device Bourns® Model 7004 NID provides a secure and weather-resistant enclosure for Telco service for residential or commercial installations. The Model 7004 supplies station protection and test access points and can be configured for a maximum of four POTS lines or three lines with DSL. The Model 7004 features convenient cable knockouts and generous working space for wire management. How To Order 7004 - 0X - X X - XX - XX Model Number Designator Number of Twisted Pairs 1 = One 3 = Three 2 = Two 4 = Four Station Protector Options D1 = 455HS-MSP (2377-45-HS) Voice/Data/DSL (UL,cUL) Z1 = 455HS-BC* (2377-45-BC) Balance-Sensitive DSL (UL, cUL) E2 = 155HS-MSP (2378-35-HS) Voice/DSL/Data (UL, cUL) Y2 = 155HS-BC* (2378-35-BC) Balance-Sensitive DSL (UL, cUL) B= C= L= M= T= O= 125EW (2374-01) Dual Gas Tube (UL, cUL, Telcordia) 125EW-R (2375-01) Dual Gas Tube (UL, cUL, RUS) 356M (2377-01) Balanced Gas Tube (UL, cUL, RUS) J130S (2380-27-01) Solid State Protector (UL, cUL) Tii355M No Station Protectors (Not available with DSL configurations) *For DSL systems requiring capacitive balance within 1 pF. Note 1 = Digi.Guard - 356 size, RUS Maximum Duty. Note 2 = Digi.Guard II - 125 size, RUS Heavy Duty. Special Options H = Security Screw in security plate S = Sealed Switching Jack w/IDC (85122-T-IDC) F = Sealed Switching Jack 4-Post (85122-T4) B = Expansion Bridge w/Binding Posts (85122-B) I = Expansion Bridge w/IDC (85122-IDC) O = No options (standard 85122 jack) DSL Options † A1 = One 3610A ADSL POTS Splitter V1 = One 3630A VDSL POTS Splitter A2 = Two 3610A ADSL POTS Splitters V2 = Two 3630A VDSL POTS Splitters P1 = One 3610A2 ADSL 2+ POTS Splitter P2 = Two 3610A2 ADSL 2+ POTS Splitters † Reliable Electronic Solutions Asia-Pacific: TEL +886- (0)2 25624117 FAX +886- (0)2 25624116 Europe: TEL +41-41 7685555 FAX +41-41 7685510 The Americas: TEL +1-951 781-5500 FAX +1-951 781-5700 DSL Configuration Note: The 3610A, 3610A2 and 3630A must be ordered with option D, Z, E or Y Station Protectors. 7004 NIDs ordered with DSL units will include Special Option F (4-post sealed switching jacks). Example: 7004-01-DF-P1 DSL Equalization R1 = One 3660 Equalization Module To add lines, use station protector + 85122 Standard Jack (Not available with DSL configurations) 85122-T4 Sealed Switching Jack, 4-post 85122-T-IDC Sealed Switching Jack w/IDC www.bourns.com Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 7004 Series - Network Interface Device Installation Diagrams MOUNTING POST STATION PROTECTOR 85122-T4 POTS MODULE POTS SPLITTER (ON TOP) PROTECTOR (ON BOTTOM) MOUNTING POST PROTECTOR POTS SPLITTER MOUNTING POST IN1/2 OUT DATA BEFORE FINISHED 85122-T (SUPPLIED) DATA MODULE Product Dimensions High 191 (7.5) CUSTOMER SIDE LOCKED TELCO SIDE FROM C.O. CAT 5 TO PHONE TO DSL MODEM Wide 196 (7.7) MM (INCHES) Deep 69 (2.7) DIMENSIONS: RJ11 Subscriber Bridges Expansion Bridges 85122 Standard Loop 85122-T4* Internal Switch - 4 Lugs 85122-IDC Insulation Displacement Connectors TR 1 TR 2 TR 3 TR 4 85122-B Binding Post 85122-T-IDC* Sealed Switch Jack w/IDC *Includes environmental sealant and closed-cell foam gasket. REV. C 05/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.