7032-06-ZCF-P12

Features ■ ■ ■ ■ Six 7032 Models designed to accept all Bourns station protectors Accepts all other manufacturers’ protection of similar design Optional sealed switching jacks with Insulation Displacement Connectors (IDCs) UL Listed per UL 497 (File: E53117) ® 7032 Series – Network Interface Device The Model 7032 NID is designed to allow service providers the capacity to terminate and add protected service pairs as needed. The 7032 NID is available in pair counts of 1 through 100. Enclosures are manufactured of high-impact resistant, ultraviolet-desensitized, flame retardant UL Listed plastic (50 and 100 pair models are 18 gauge rust resistant zinc-coated steel, with twenty-five pair available in both plastic and steel). This 7032 is completely subscriber lockable with Telco override and subscriber friendly termination posts for safe and secure operation. How To Order 7032 - XX - X X X - X XX Model Number Designator Number of Lines 06, 12, 25, 50, 100 Station Protector Options D1 = Z1 = E= Y= B= C= L= M= T= O= 455HS-MSP (2377-45-HS) Broadband Voice/Data Services 455HS-BC (2377-45-BC) Balance-Sensitive DSL Systems 155HS-MSP (2378-35-HS) Broadband Voice/Data Services 155HS-BC (2378-35-BC) Balance-Sensitive DSL Systems 125EW (2374-01) Dual Gas Tube (UL, cUL, Telcordia) 125EW-R (2375-01) Dual Gas Tube (UL, cUL, RUS) 356M (2377-01) Balanced Gas Tube (UL, cUL, RUS) J130S (2380-27-01) Solid State Protector (UL, cUL) Tii355M No Station Protectors (Not available with DSL configurations) Note 1 = Digi. Guard Enclosure Size and Construction (see table for dimensions) E = 100 Pair Capacity (Steel) A = 6 Pair Capacity (Plastic) B = 12 Pair Capacity (Plastic) P = 1/2 inch Plywood-no enclosure C = 25 Pair Capacity (Steel) V = 25 Pair Capacity (Plastic) D = 50 Pair Capacity (Steel) Special Options S = Sealed Switching Jack w/IDC (85122-T-IDC) F = Sealed Switching Jack 4-Post (85122-T4) J = Modular Jacks (85122) B = Expansion Bridge w/Binding Posts (85122-B) I = Expansion Bridge w/IDC (85122-IDC) X = Dual Ground Plate O = No options DSL Options A = One 3610A, ADSL POTS Splitter P = One 3610A2, ADSL 2+ POTS Splitter V = One 3630A, VDSL POTS Splitter Number of DSL Lines 03, 06, 12, 25, 50 To add lines, use station protector + upgrade kit 85003 (old style) or: 85122 Standard Jack (Not available with DSL configurations) 85122-T4 Sealed Switching Jack, 4-post 85122-T-IDC Sealed Switching Jack w/IDC *DSL Configuration Note: 3610A or 3630A must be ordered with option D, Z, E or Y Station Protectors. REV. G 05/06 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 7032 Series – Network Interface Device Product Dimensions Enclosure Size A B C D E V Pair (Max.) 06 12 25 50 100 25 DSL (Max.) 03 06 12 25 50 12 Dimensions High 279.4 (11.0) 444.5 (17.5) 431.8 (17.0) 914.4 (36.0) 914.4 (36.0) 469.9 (18.5) Wide 279.4 (11.0) 279.4 (11.0) 406.4 (16.0) 482.6 (19.0) 508 (20.0) 444.5 (17.5) Deep 101.6 (4.0) 127 (5.0) 76.2 (3.0) 114.3 (4.5) 177.8 (7.0) 139.7 (5.5) DIMENSIONS: MM (INCHES) RJ11 Subscriber Bridges Expansion Bridges 85122 Standard Loop 85122-T4* Internal Switch - 4 Lugs 85122-IDC Insulation Displacement Connectors TR 1 TR 2 TR 3 TR 4 85122-B Binding Post 85122-T-IDC* Sealed Switch Jack w/IDC *Includes environmental sealant and closed-cell foam gasket. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.