Features
n Plain or knurled shaft option
n 10 % TR tolerance
n Conductive polymer element
n Very low noise
n Single-turn
n 250K and 500K resistances
Model 82 Vintage Premium Guitar Potentiometer
Initial Electrical Characteristics1
Standard Resistance Value�������������������������������������������������������������������������������������������������������������������������������������������������������������������250K and 500K ohms
Total Resistance Tolerance���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 10 %
Independent Linearity������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ ±5 %
Absolute Minimum Resistance�������������������������������������������������������������������������������������������������������������������������������������������������������������������� 2 ohms maximum
Effective Electrical Angle�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������225 ° ± 5 °
Contact Resistance Variation������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������ ±1 %
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
Sea Level������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������1,500 VAC minimum
70,000 Feet������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������500 VAC minimum
Insulation Resistance (500 VDC)��������������������������������������������������������������������������������������������������������������������������������������������������� 1,000 megohms minimum
Power Rating (Voltage Limited By Power Dissipation or 350 VAC, Whichever Is Less)
+70 °C�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������0.25 watt
+125 °C��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������0 watt
Theoretical Resolution���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������Essentially infinite
Environmental Characteristics1
Operating Temperature Range�������������������������������������������������������������������������������������������������������������������������������������������������������������������� -40 °C to +125 °C
Storage Temperature Range����������������������������������������������������������������������������������������������������������������������������������������������������������������������� -55 °C to +125 °C
Temperature Coefficient Over Storage Temperature Range��������������������������������������������������������������������������������������������������������������������������� ±1,000 ppm/°C
Vibration���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������15 G
Total Resistance Shift��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±2 % maximum
Voltage Ratio Shift�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±5 % maximum
Shock�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������30 G
Total Resistance Shift��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±2 % maximum
Voltage Ratio Shift�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±5 % maximum
Load Life��������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 1,000 hours
Total Resistance Shift������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±10 % maximum
Rotational Life (No Load)�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 100,000 cycles
Total Resistance Shift������������������������������������������������������������������������������������������������������������������������������������������������������������������������������±20 % maximum
Contact Resistance Variation @ 50,000 cycles������������������������������������������������������������������������������������������������������������������������������������������������������� ±3 %
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
Total Resistance Shift����������������������������������������������������������������������������������������������������������������������������������������������������������������������±20 % TRS maximum
Insulation Resistance (500 VDC)������������������������������������������������������������������������������������������������������������������������������������������������ 100 megohms minimum
IP Rating ������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� IP 40
Mechanical Characteristics1
Mechanical Angle�����������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������300 ° ±5 °
Rotational Torque��������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 0.7 oz-in (50 g-cm) typical
Weight���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������� 21 grams
Terminals���������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������J-hooks
Soldering Condition������������������������������������������������������������������������ Recommended hand soldering using Sn95/Ag5 no clean solder, 0.025 ˝ wire diameter.
.
Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.
Marking�������������������������������������������������������������������������������������������������������� Manufacturer’s trademark, date code, resistance, manufacturer’s part number.
Hardware���������������������������������� One lockwasher (H-37-2), one flat washer (35200-0793), two mounting nuts (H-38-2) and one solder lug washer (H-127)
are shipped with each potentiometer
1 ELECTRCAL SPECIFICATIONS TESTED AT 250 RPM, AT ROOM AMBIENT: +25 °C NOMINAL.
Audio Taper Plot
Selection Guide
Schematic
100
Part Number
PERCENT VOLTAGE RATIO OUTPUT
90
Taper/Shaft
Resistance
Value (Ω)
80
82A1D-A24-BA0/186L
Audio/Plain
500K
70
82A1D-A24-BA0/187L
Audio/Plain
250K
82A1D-Z28-BA0/254L
Audio/Knurled
500K
82A1D-Z28-BA0/255L
Audio/Knurled
250K
82Z1D-Z33-BA0/753L
Audio/Knurled
(Long Bushing)
250K
82Z1D-Z33-BA0/754L
Audio/Knurled
(Long Bushing)
500K
60
50
40
30
20
10
0
0
10
20
30
40
50
60
70
80
90
100
PERCENT EFFECTIVE ELECTRICAL CLOCKWISE ROTATION
1
CCW
3
2
POTENTIOMETER
WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov
*RoHS Directive 2015/863, Mar 31, 2015 and Annex.
Specifications are subject to change without notice. Users should verify actual device performance in their specific
applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the
last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Additional Features
Applications
n Standard audio taper
n Electric guitars
n Long rotational life
n Bass guitars
n RoHS compliant*
Model 82 Vintage Premium Guitar Potentiometer
Product Dimensions
MOUNTING FACE
17.48 ± 0.78
(.688 ± .031)
FMS
15.88 ± 0.38
(.625 ± .015)
MOUNTING FACE
26.97 ± 0.78
(1.062 ± .031)
FMS
15.88 ± 0.38
(.625 ± .015)
0.76 ± 0.25
(.030 ± .010)
0.76 ± 0.25
(.030 ± .010)
5.87 ± 0.25
(.231 ± .010)
5.87 ± 0.25
(.231 ± .010)
1.57 ± 0.25
(.062 ± .010)
5.03
DIA.
(.198)
5.97
(.235)
DIA. 18 TEETH
KNURLED
SHAFT
7.92
MIN.
(.312)
DIA.
1.57 ± 0.25
(.062 ± .010)
5.03
DIA.
(.198)
5.97
(.235)
18 TEETH
DIA. KNURLED
SHAFT
(LONG)
0.25
X 45 ° ± 5 ° CHAMFER
(.010)
0.25
X 45 ° ± 5 ° CHAMFER
(.010)
0.81
TYP.
(.032)
DIA.
5.97 ± 0.38
(.235 ± .015)
5.08 ± 0.38
(.200 ± .015)
7.92
MIN.
(.312)
17.45
(.687)
MIN.
9.53 ± 0.38
(.375 ± .015)
19.05 ± 0.38
(.750 ± .015)
0.81
TYP.
(.032)
5.97 ± 0.38
(.235 ± .015)
5.08 ± 0.38
(.200 ± .015)
MOUNTING FACE
15.88 ± 0.38
(.625 ± .015)
19.05 ± 0.78
(.750 ± .031)
FMS
3/8-32
UNEF-2A
15.88 ± 0.41
(.625 ± .016)
6.0
(.236)
DIA.
7.92
MIN.
(.312)
PLAIN
SHAFT
0.25
X 45 ° ± 5 ° CHAMFER
(.010)
3
5.97 ± 0.38
(.235 ± .015)
5.08 ± 0.38
(.200 ± .015)
2
3
15.75 ± 0.13
DIA.
(.620 ± 0.005)
9.58 / 9.93
(.377 / .391)
R
LOCKWASHER
2.36
(.093)
9.75 ± 0.13
DIA.
(.384 ± .005)
1.0
R
(.039)
0.56
REF.
(.022)
12.52 / 12.88
(.493 / .507)
DIA.
14.43
(.568)
10.41
DIA.
(.410)
9.40 ± 0.76
(.37 ± .03)
12.75 ± 0.13
DIA.
(.502 ± .005)
0.5
(.020)
0.5
R
(.020)
SOLDER LUG
WASHER
0.81 ± 0.08
(.032 ± .003)
30 ° ± 5 °
HEX NUT
FLAT WASHER
3.81
(.150)
MAX. ALL TERMINALS
5.70
(.224)
2 PLCS.
0.15
2.86
(.006)
(.113)
0.86
(.034)
R
3.00
(.118)
3.16
(.124)
1.83
(.072)
1.0
(.039)
135 °
26.0 ± 0.13
(1.024 ± .005)
1
(.5 3.57
34
)
4.35
(.171)
2.24
(.088)
0.80
R
(.031) 1.60
(.063)
2.47
(.097)
16.0
(.630)
0.65 ± 0.05
(.026 ± .002)
R
14.66 +0.00/-0.43
(.577 +.000/-.017)
0.38
(.015)
STANDOFF
ALL TERMINALS
5.33 ± 0.76
(.21 ± .03)
0.81
R
(.032)
INSIDE
ALL TERMINALS
2
9.53 ± 0.38
(.375 ± .015)
0.81
TYP.
(.032)
3/8-32 NEF-2B
1
1
DIA.
9.58 ± 0.38
(.377 ± .015)
15.88 ± 0.38
(.625 ± .015)
R
1.60
(.063)
DIMENSIONS:
MM
(INCHES)
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
15.75 ± 0.13
DIA.
(.620 ± 0.005)
9.58 / 9.93
(.377 / .391)
0.5
R
(.020)
0.5
R
(.020)
Model 82 Vintage Premium Guitar Potentiometer
Suggested Panel Layout
9.91
DIA.
(.390)
DIMENSIONS:
MM
(INCHES)
Date Code Description
Hardware
R
LOCKWASHER
LOCKWASHER H-37-2
NUT H-38-2
(.093 ± .01)
3/8-32 NEF-2B
14.66 +0.00/-0.43
(.577 +.000/-.017)
30 ° ± 5 °
1.83
(.072)
0.65 ± 0.05
(.026 ± .002)
14.66 +0/-0.43
(.577 +0/-.017)
0.56 ± 0.05
(.022 ± .002)
FLAT WASHER 35200-07953
DIA.
14.43
(.568)
M = COUNTRY OF MANUFACTURE
(MEXICO)
YY = LAST TWO DIGITS OF YEAR
MANUFACTURED
1.0
R
(.039)
30 ° ± 5 °
135 °
DIMENSIONS:
1
(.5 3.57
34
)
MM
(INCHES)
0.81 ± 0.08
(.032 ± .003)
FLAT WASHER
SOLDER LUG WASHER H-127
15.75 ± 0.13
DIA.
(.620 ± 0.005)
9.58 / 9.93
(.377 / .391)
12.75 ± 0.13
DIA.
(.502 ± .005)
0.5
R
(.020)
0.5
R
(.020)
9.75 ± 0.13
DIA.
(.384 ± .005)
0.56
REF.
(.022)
12.52 / 12.88
(.493 / .507)
R
5.70
(.224)
3.00
(.118)
1.0
(.039)
3.16
(.124)
LOCKWASHER
SOLDER LUG
WASHER
2.36
(.093)
14.66 +0.00/-0.43
(.577 +.000/-.017)
3/8-32 NEF-2B
R
1.83
(.072)
30 ° ± 5 °
HEX NUT
DIA.
14.43
(.568)
R
10.41
DIA.
(.410)
1.0
(.039)
2.24
(.088)
2.47
(.097)
16.0
(.630)
0.65 ± 0.05
(.026 ± .002)
2 PLCS.
0.15
2.86
(.006)
(.113)
0.86
(.034)
135 °
1
(.5 3.57
34
)
4.35
(.171)
0.80
R
(.031) 1.60
(.063)
R
3.0
(.11
3.16
(.124)
2 PLCS.
0.15
(.006)
0.8
(.03
R
2.47
(.097)
26.0 ± 0.13
(1.024 ± .005)
10.41
DIA.
(.410)
WW = WEEK NUMBER
16.0
(.630)
(
1.0
(.039)
SOLDER LUG
2.36 ± 0.25
WASHER
2.36
(.093)
9.58 ± 0.36
(.377 ± .014)
HEX NUT
YYWWM
9.75 ± 0.13
DIA.
(.384 ± .005)
0.56
REF.
(.022)
12.52 / 12.88
(.493 / .507)
12.52 ± 0.36
(.493
± .014)
3/8-32
NEF-2B
12.75 ± 0.13
DIA.
(.502 ± .005)
1.60
(.063)
26.0 ± 0.13
(1.024 ± .005)
Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com
0.81 ± 0.08
The Americas: Tel: +1-951
781-5500 • Email: americus@bourns.com
(.032 ± .003)
www.bourns.com
FLAT WASHER
REV. 10/20
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
R
1.60
(.063)
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and
P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
^P[OV\[UV[PJL
很抱歉,暂时无法提供与“82R1A-R22-A20L”相匹配的价格&库存,您可以联系我们找货
免费人工找货