BD649

BD645, BD647, BD649, BD651 NPN SILICON POWER DARLINGTONS ● ● ● ● Designed for Complementary Use with BD646, BD648, BD650 and BD652 62.5 W at 25°C Case Temperature 8 A Continuous Collector Current Minimum hFE of 750 at 3V, 3 A B C E TO-220 PACKAGE (TOP VIEW) 1 2 3 Pin 2 is in electrical contact with the mounting base. MDTRACA absolute maximum ratings at 25°C case temperature (unless otherwise noted) RATING BD645 Collector-base voltage (IE = 0) BD647 BD649 BD651 BD645 Collector-emitter voltage (IB = 0) BD647 BD649 BD651 Emitter-base voltage Continuous collector current Peak collector current (see Note 1) Continuous base current Continuous device dissipation at (or below) 25°C case temperature (see Note 2) Continuous device dissipation at (or below) 25°C free air temperature (see Note 3) Unclamped inductive load energy (see Note 4) Operating junction temperature range Storage temperature range Lead temperature 3.2 mm from case for 10 seconds NOTES: 1. 2. 3. 4. VEBO IC ICM IB Ptot Ptot ½LIC2 Tj Tstg TL VCEO V CBO SYMBOL VALUE 80 100 120 140 60 80 100 120 5 8 12 0.3 62.5 2 50 -65 to +150 -65 to +150 260 V A A A W W mJ °C °C °C V V UNIT This value applies for tp ≤ 0.3 ms, duty cycle ≤ 10%. Derate linearly to 150°C case temperature at the rate of 0.4 W/°C. Derate linearly to 150°C free air temperature at the rate of 16 mW/°C. This rating is based on the capability of the transistor to operate safely in a circuit of: L = 20 mH, IB(on) = 5 mA, RBE = 100 Ω, VBE(off) = 0, RS = 0.1 Ω, VCC = 20 V. MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP 1 BD645, BD647, BD649, BD651 NPN SILICON POWER DARLINGTONS electrical characteristics at 25°C case temperature (unless otherwise noted) PARAMETER Collector-emitter breakdown voltage TEST CONDITIONS BD645 V(BR)CEO IC = 30 mA IB = 0 (see Note 5) BD647 BD649 BD651 VCE = 30 V ICEO Collector-emitter cut-off current VCE = 40 V VCE = 50 V VCE = 60 V VCB = 60 V VCB = 80 V VCB = 100 V ICBO Collector cut-off current VCB = 120 V VCB = 40 V VCB = 50 V VCB = 60 V VCB = 70 V IEBO hFE VCE(sat) VBE(sat) VBE(on) Emitter cut-off current Forward current transfer ratio Collector-emitter saturation voltage Base-emitter saturation voltage Base-emitter voltage VEB = VCE = IB = IB = IB = VCE = 5V 3V 12 mA 50 mA 50 mA 3V IB = 0 IB = 0 IB = 0 IB = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IE = 0 IC = 0 IC = IC = IC = IC = IC = 3A 3A 5A 5A 3A TC = 150°C TC = 150°C TC = 150°C TC = 150°C (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) (see Notes 5 and 6) 750 2 2.5 3 2.5 V V V BD645 BD647 BD649 BD651 BD645 BD647 BD649 BD651 BD645 BD647 BD649 BD651 MIN 60 80 100 120 0.5 0.5 0.5 0.5 0.2 0.2 0.2 0.2 2.0 2.0 2.0 2.0 5 mA mA mA V TYP MAX UNIT NOTES: 5. These parameters must be measured using pulse techniques, tp = 300 µs, duty cycle ≤ 2%. 6. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts. thermal characteristics PARAMETER RθJC RθJA Junction to case thermal resistance Junction to free air thermal resistance MIN TYP MAX 2.0 62.5 UNIT °C/W °C/W 2 MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP BD645, BD647, BD649, BD651 NPN SILICON POWER DARLINGTONS TYPICAL CHARACTERISTICS TYPICAL DC CURRENT GAIN vs COLLECTOR CURRENT VCE(sat) - Collector-Emitter Saturation Voltage - V 50000 TCS130AD COLLECTOR-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT 2·0 tp = 300 µs, duty cycle < 2% IB = I C / 100 TCS130AB hFE - Typical DC Current Gain TC = -40°C TC = 25°C TC = 100°C 10000 1·5 1000 1·0 VCE = 3 V tp = 300 µs, duty cycle < 2% 100 0·5 1·0 IC - Collector Current - A 10 TC = -40°C TC = 25°C TC = 100°C 0·5 0·5 1·0 IC - Collector Current - A 10 Figure 1. Figure 2. BASE-EMITTER SATURATION VOLTAGE vs COLLECTOR CURRENT 3·0 VBE(sat) - Base-Emitter Saturation Voltage - V TC = -40°C TC = 25°C TC = 100°C TCS130AC 2·5 2·0 1·5 1·0 IB = IC / 100 tp = 300 µs, duty cycle < 2% 0·5 0·5 1·0 IC - Collector Current - A 10 Figure 3. MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP 3 BD645, BD647, BD649, BD651 NPN SILICON POWER DARLINGTONS MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA 10 SAS130AC IC - Collector Current - A 1·0 0·1 0.01 1·0 BD645 BD647 BD649 BD651 10 100 1000 VCE - Collector-Emitter Voltage - V Figure 4. THERMAL INFORMATION MAXIMUM POWER DISSIPATION vs CASE TEMPERATURE 80 Ptot - Maximum Power Dissipation - W 70 60 50 40 30 20 10 0 0 25 50 75 100 125 150 TC - Case Temperature - °C TIS130AC Figure 5. 4 MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP BD645, BD647, BD649, BD651 NPN SILICON POWER DARLINGTONS MECHANICAL DATA TO-220 3-pin plastic flange-mount package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. TO220 4,70 4,20 ø 3,96 3,71 10,4 10,0 2,95 2,54 6,6 6,0 15,90 14,55 1,32 1,23 see Note B see Note C 6,1 3,5 0,97 0,61 1 2 3 1,70 1,07 14,1 12,7 2,74 2,34 5,28 4,88 2,90 2,40 0,64 0,41 VERSION 1 VERSION 2 ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. The centre pin is in electrical contact with the mounting tab. B. Mounting tab corner profile according to package version. C. Typical fixing hole centre stand off height according to package version. Version 1, 18.0 mm. Version 2, 17.6 mm. MDXXBE MAY 1993 - REVISED SEPTEMBER 2002 Specifications are subject to change without notice. NOITAMROFNI TCUDORP 5