CD-HD2004

Features Applications n Low power loss and high efficiency n Computer monitors n High current capability n Set-top boxes n Low profile package n Cable modems n RoHS compliant* n AC operated products CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Schottky Bridge Rectifier Diodes for rectification applications in a compact chip package 0.24 ˝ x 0.19 ˝ size format, which offers PCB real estate savings and are considerably smaller than standard parts. The Schottky Bridge Rectifier Diodes offer a forward current of 2 A with a choice of repetitive peak reverse voltages between 40 V and 100 V. 4 – 1 + ~ 3 ~ 2 Click these links for more information: PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol HD2004 HD2006 40 60 CD- HD201 HD2006L 100 60 Unit Maximum Repetitive Peak Reverse Voltage VRRM Maximum Average Forward Rectified Current (TA = 55 °C) IF(AV) 2.0 A Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 50.0 A TJ -55 to +125 °C TSTG -55 to +125 °C Operating Temperature Range Storage Temperature Range V Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Instantaneous Forward Voltage Repetitive Peak Reverse Current Junction Capacitance Thermal Resistance, Junction to Air Thermal Resistance, Junction to Lead Symbol Test Conditions CD-HD2004 CD-HD2006 VF IF = 2 A CD-HD201 CD-HD2006L CD-HD2004 VR = VRRM CD-HD2006 IRRM TA = +25 °C CD-HD201 CD-HD2006L VR = 4 V, CJ CD-HD2x(L)x f = 1.0 MHz CD-HD2004 Junction to CD-HD2006 Rth(JA) Ambient CD-HD201 (NOTE 1) CD-HD2006L CD-HD2004 Junction to CD-HD2006 Rth(JC) Lead CD-HD201 (NOTE 1) CD-HD2006L CD-HD2x(L) Min. NOTE 1: Measured when mounted on PCB with 5.0 mm x 5.0 mm (0.2 ˝ x 0.2 ˝) copper pad areas. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov Typ. 0.49 0.60 0.75 0.50 0.025 0.025 0.025 0.03 Max. 0.5 0.70 0.85 0.55 0.20 0.20 0.20 0.2 250 110 110 110 110 15 15 15 15 Unit V mA pF °C / W °C / W *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications n AC operated products n Set-top boxes n Computer monitors n Cable modems CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode Rating and Characteristic Curves 2.5 CD-HD2004 CD-HD2006 CD-HD201 2.0 1.5 1.0 0.5 0 60 Hz Resistive or Inductive Load 0 25 50 75 100 125 150 Average Forward Rectified Current (Amps) Average Forward Rectified Current (Amps) Forward Current Derating Curve 2.5 2.0 1.5 CD-HD2006L 1.0 0.5 0 60 Hz Resistive or Inductive Load 0 25 50 75 100 125 150 Ambient Temperature (°C) Ambient Temperature (°C) Maximum Non-Repetitive Peak Forward Surge Current 60 Pulse Width 8.3 ms Single Half-Sine-Wave Peak Forward Surge Current (Amps) Peak Forward Surge Current (Amps) 60 50 40 CD-HD2004 CD-HD2006 CD-HD201 30 20 10 0 1 10 40 30 CD-HD2006L 20 10 0 100 Pulse Width 8.3 ms Single Half-Sine-Wave 50 1 10 Number of Cycles at 60 Hz 100 Number of Cycles at 60 Hz Forward Characteristics 10.00 CD-HD2006 Instantaneous Forward Current (Amps) Instantaneous Forward Current (Amps) 10.00 CD-HD2004 1.00 CD-HD201 TA = 25 °C 0.10 0.01 CD-HD2006L 1.00 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Instantaneous Forward Voltage (Volts) 1.0 TA = 25 °C 0.10 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Instantaneous Forward Voltage (Volts) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 100 100 CD-HD2004 CD-HD2006 Instantaneous Forward Current (Amps) Instantaneous Forward Current (Amps) CD-HD2006 CD-HD2004 1.00 CD-HD201 TA = 25 °C 0.10 CD-HD2006L 1.00 TA = 25 °C 0.10 CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier 0.01 Diode 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0 1.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Instantaneous Forward Voltage (Volts) Instantaneous Forward Voltage (Volts) Rating and Characteristic Curves Reverse Characteristics 100 100 CD-HD2004 CD-HD2006 CD-HD201 10 Instantaneous Reverse Current (mA) Instantaneous Reverse Current (mA) 10 TJ = 100 °C 1.0 0.10 0.01 CD-HD2006L TJ = 100 °C 1.0 0.10 CD-HD2006L TJ = 25 °C 0.01 TJ = 25 °C 0.001 0.0001 0.001 0 20 40 60 80 100 0.0001 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Percent of Rated Peak Reverse Voltage (%) Typical Junction Capacitance Junction Capacitance (pF) 3000 CD-HD2004 CD-HD2006 CD-HD201 CD-HD2006L 1000 500 TJ = 25 °C 200 0 0.1 1 10 100 Reverse Voltage (Volts) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode Product Dimensions This is an RoHS2 compliant product, packaged with FRP substrate and is epoxy underfilled. The terminals are pure tin plated (lead free) and are solderable per MIL-STD-750, Method 2026. The package and dimensions are shown below. A Dimensions B TOP VIEW F C MM DIMENSIONS: (INCHES) D A 4.65 - 4.85 (0.183 - 0.191) B 2.49 - 2.59 (0.098 - 0.102) C 6.05 - 6.25 (0.238 - 0.246) D 1.35 - 1.45 (0.053 - 0.057) E 0.95 - 1.05 (0.037 - 0.041) F 0.92 - 1.22 (0.036 - 0.048) E Recommended Footprint How to Order CD - HD 2 004 L 2.5 MAX. (0.098) Common Code Chip Diode Package HD = HD Bridge Series Average Forward Current 2=2A 5.9 (0.232) MAX. Reverse Voltage 004 = 40 V 006 = 60 V 01 = 100 V Forward Voltage Suffix (blank) = Standard Forward Voltage L = Low Forward Voltage Typical Part Marking 1.2 MAX. (0.047) DIMENSIONS: 1.2 MAX. (0.047) MM (INCHES) MANUFACTURER S TRADEMARK VRMS 40 = 40 V 60 = 60 V 100 = 100 V DATE CODE 20 L 60 LOW FORWARD VOLTAGE FORWARD CURRENT x 100 mA Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CD-HD2x(L) Series Surface Mount Schottky Bridge Rectifier Diode Packaging Information The surface mount product is packaged in a 12 mm x 8 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... 10 pitches (min.) ....... ....... Leader ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) MM (INCHES) Direction of Feed Item Symbol CD-HD2x(L) Carrier Width A 5.20 ± 0.30 (0.205 ± 0.012) Carrier Length B 6.60 ± 0.30 (0.260 ± 0.012) Carrier Depth C 1.65 ± 0.10 (0.065 ± 0.004) Sprocket Hole d 1.50 ± 0.10 (0.059 ± 0.004) Reel Outside Diameter D 330 (12.992) Reel Inner Diameter D1 Feed Hole Diameter D2 13.0 ± 0.50 (0.512 ± 0.02) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 5.50 ± 0.05 (0.217 ± 0.002) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.10 (0.079 ± 0.004) Overall Tape Thickness T 0.40 (0.016) Tape Width W 12.00 ± 0.30 (0.472 ± 0.012) Reel Width W1 Quantity per Reel -- 50.0 MIN. (1.969) 14.4 MAX. (0.567) 5,000 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 03/23 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.