CD-MBL110SL

Features Applications ■ RoHS compliant* ■ AC operated products ■ Low power loss and high efficiency ■ Computer monitors ■ High current capability ■ Set-top boxes ■ Low profile package ■ Cable modems CD-MBL1xxSL Surface Mount Bridge Rectifier Diode General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Bridge Rectifier Diodes for rectification applications in compact chip package 0.23 ˝ x 0.20 ˝ size format, which offers PCB real estate savings and are considerably smaller than standard parts. The Bridge Rectifier Diodes offer a forward current of 1 A with a choice of repetitive peak reverse voltages between 600 V and 1000 V. 4 – 1 + ~ 3 ~ 2 Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol CDMBL106SL MBL108SL MBL110SL 600 800 1000 Unit Maximum Repetitive Peak Reverse Voltage VRRM Maximum Average Forward Rectified Current (TA = 55 °C) IF(AV) 1.0 A Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 45 A TJ TSTG -55 to +175 °C -55 to +175 °C Operating Temperature Range Storage Temperature Range V Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Instantaneous Forward Voltage Repetitive Peak Reverse Current Junction Capacitance Symbol VF IRRM CJ CD-MBL1xxSL Test Conditions Min. IF = 1 A VR = VRRM Max. 0.92 0.95 V 5.0 μA TA = +25 °C VR = 4 V, f = 1.0 MHz Unit Typ. 25 pF Thermal Resistance, Junction to Air (1) RΘJA 95 °C / W Thermal Resistance, Junction to Lead (1) RΘJL 20 °C / W NOTE 1: Measured when mounted on PCB with 5.0 mm x 5.0 mm (0.2 ˝ x 0.2 ˝) copper pad areas. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD-MBL1xxSL Surface Mount Bridge Rectifier Diode Rating and Characteristic Curves Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (Amps) Average Forward Rectified Current (Amps) Forward Current Derating Curve Number of Cycles at 60 Hz Ambient Temperature (°C) Reverse Characteristics Instantaneous Reverse Current (µA) Instantaneous Forward Current (Amps) Forward Characteristics Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage (Volts) Junction Capacitance (pF) Typical Junction Capacitance Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Reverse Voltage (Volts) CD-MBL1xxSL Surface Mount Bridge Rectifier Diode Product Dimensions This is an RoHS2 compliant product, packaged with FRP substrate and is epoxy underfilled. The terminals are pure tin plated (lead free) and are solderable per MIL-STD-750, Method 2026. The package and dimensions are shown below. A Dimensions B TOP VIEW F C MM DIMENSIONS: (INCHES) D A 5.20 - 5.40 (0.205 - 0.213) B 4.10 - 4.30 (0.161 - 0.169) C 5.70 - 5.90 (0.224 - 0.232) D 1.00 - 1.20 (0.039 - 0.047) E 0.85 - 0.95 (0.033 - 0.037) F 0.86 - 1.16 (0.0338 - 0.0457) E Recommended Footprint How to Order CD - MBL 1 06 SL 4.10 ± 0.1 (0.161 ± 0.004) Common Code Chip Diode Model MBL = MBL Bridge Series Average Forward Current 1= 1A 5.72 ± 0.1 (0.225 ± 0.004) Reverse Voltage 06 = 600 V 08 = 800 V 10 = 1000 V Forward Voltage Suffix SL = Low Forward Voltage Typical Part Marking 1.5 ± 0.1 (0.059 ± 0.004) 1.10 ± 0.1 (0.043 ± 0.004) MANUFACTURER S TRADEMARK MM DIMENSIONS: (INCHES) 10L VRMS = 800 V DATE CODE LOW FORWARD VOLTAGE FORWARD CURRENT x 100 mA Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD-MBL1xxSL Surface Mount Bridge Rectifier Diode Packaging Information The surface mount product is packaged in a 12 mm x 8 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... 10 pitches (min.) ....... ....... Leader ....... ....... W1 Start DIMENSIONS: MM (INCHES) 10 pitches (min.) Direction of Feed Item Symbol CD-MBL1xxSL Carrier Width A 5.90 ± 0.10 (0.232 ± 0.004) Carrier Length B 6.50 ± 0.10 (0.256 ± 0.004) Carrier Depth C 1.50 ± 0.10 (0.059 ± 0.004) Sprocket Hole d 1.55 ± 0.05 (0.061 ± 0.002) Reel Outside Diameter D 330 (12.992) Reel Inner Diameter D1 Feed Hole Diameter D2 13.0 ± 0.20 (0.512 ± 0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 5.50 ± 0.05 (0.217 ± 0.002) Punch Hole Pitch P 8.00 ± 0.10 (0.315 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness T 0.20 ± 0.10 (0.008 ± 0.004) Tape Width W 12.00 ± 0.20 (0.472 ± 0.008) Reel Width W1 Quantity per Reel -- 50.0 MIN. (1.969) 18.7 MAX. (0.736) 5,000 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 08/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL