CD0201-T20C

Features Applications ■ Bidirectional ESD protection ■ Portable electronics ■ Low clamping voltage ■ Cellular handsets and accessories ■ Ultra-small SMD package ■ Audio & video equipment ■ RoHS compliant* ■ Communication systems ■ Computers and peripherals CD0201-T20C - Surface Mount TVS Diode General Information Additional Information ® The Bourns Model CD0201-T20C device provides signal and power line ESD protection for electronic devices such as cellular phones, handheld electronics and other portable electronic applications. Click these links for more information: The device is available in a compact industry-standard 0201 sized chip package (0603 metric measuring 0.6 mm x 0.3 mm). It is intended to be mounted directly onto a printed circuit board. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT The device is designed to meet IEC 61000-4-2 (ESD) protection requirements. The combination of its small size and high ESD surge capability makes the Model CD0201-T20C well-suited for use in protecting sensitive electronics from damage or latch-up due to ESD in portable applications. The Model CD0201-T20C TVS diode has a working peak voltage of 20 V. Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted) Parameter Maximum Working Peak Reverse Voltage ESD Protection per IEC 61000-4-2 Contact Discharge Air Discharge Operating Temperature Range Storage Temperature Range Symbol VRWM Value ±20 Unit V VESD ±20 ±20 -55 to +85 -55 to +150 kV TOPR TSTG °C °C Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Breakdown Voltage Leakage Current Symbol VBR IR ESD Clamping Voltage (Note 1) VC Junction Capacitance CJ Note 1: Condition IBR = 1 mA VRWM = 20 V IEC 61000-4-2 +8 kV (ITLP = 16 A) VR = 0 V, f = 1 MHz Min. 22.8 Typ. 6.5 Max. 27.3 0.1 Unit V μA 34 V 10 pF ESD Clamping Voltage was measured by a Transmission Line Pulsing (TLP) System. TLP conditions: Z0= 50 Ω, tp= 100 ns, tr= 1 ns. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD0201-T20C - Surface Mount TVS Diode Performance Graphs 18 16 14 12 10 8 6 4 2 0 -2 -4 -6 -8 -10 -12 -14 -16 -18 -40 Capacitance 8 V_pulse Pulse from a transmission line 100 ns TLP_V 7 TLP_I + 6 DUT Input Capacitance (pF) TLP Current (A) Transmission Line Pulsing - 5 4 3 2 f = 1 MHz, T = 25 °C 1 -30 -20 -10 0 10 20 30 0 -20 40 TLP Voltage (V) -16 -12 -8 -4 0 4 8 12 16 20 Input Voltage (V) Typical Part Marking How to Order CD 0201 - T 20 C Common Code Chip Diode Package 0201 = 0201 Package Series T = TVS Diode Maximum Reverse Working Peak Voltage 20 = 20 V Suffix C = Bidirectional Diode Product Dimensions BOTTOM VIEW TOP VIEW Dim. 0201 Package A 0.6 ± 0.05 (0.024 ± 0.002) B 0.3 ± 0.05 (0.012 ± 0.002) C 0.3 ± 0.02 (0.012 ± 0.001) C1 0.025 ± 0.025 (0.001 ± 0.001) D1 0.18 ± 0.05 (0.007 ± 0.002) D2 0.19 ± 0.05 (0.007 ± 0.002) E1 / E2 0.25 ± 0.05 (0.01 ± 0.002) F 0.35 (0.014) A D1 D2 45 ° 0.05 (0.002) B 0.05 (0.002) E1 E2 SIDE VIEW F C DIMENSIONS: MM (INCHES) C1 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD0201-T20C - Surface Mount TVS Diode Recommended PCB Footprint 0.15 (0.006) 0.25 (0.010) 0.25 (0.010) 0.30 (0.012) 0.65 (0.026) Packaging Information P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer End ....... ....... C Device ....... ....... Leader ....... ....... 10 pitches (min.) ....... ....... W1 Start DIMENSIONS: 10 pitches (min.) POLARITY STRIP MM (INCHES) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth CD0201-T20C 0.36 ± 0.03 (0.014 ± 0.001) Item Symbol CD0201-T20C 3.5 ± 0.05 (0.138 ± 0.002) Punch Hole Position F 0.66 ± 0.03 (0.026 ± 0.001) Punch Hole Pitch P 2.0 ± 0.10 (0.079 ± 0.004) C 0.33 ± 0.03 (0.013 ± 0.001) Sprocket Hole Pitch P0 4.0 ± 0.10 (0.157 ± 0.004) Sprocket Hole d 1.5 +0.1/-0 (0.059 +0.004/-0) Embossment Center P1 2.0 ± 0.05 (0.079 ± 0.002) Reel Outside Diameter D 180 ± 2 (7.087 ± 0.079) Overall Tape Thickness T 0.23 ± 0.02 (0.009 ± 0.001) Reel Inner Diameter D1 50 MIN. (1.969) Tape Width W 8.0 ± 0.10 (0.315 ± 0.004) Feed Hole Diameter D2 13 +0.5/-0.2 (0.512 +0.02/-0.008) Reel Width W1 E 1.75 ± 0.10 (0.069 ± 0.004) Sprocket Hole Position Quantity per Reel -- 14.4 MAX. (0.567) 12,000 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL