CD1408-F1600

PL IA NT Features Applications *R oH S CO M Lead free device (RoHS compliant*) Low profile Low power loss, high efficiency UL 94V-0 classification High frequency switching power supplies Inverters Free wheeling Polarity protection CD1408-F1200~F11000 – Surface Mount Rectifier Diode General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Rectifier Diodes for rectification applications, in compact chip package 1408 size format (compatible with SOD87, SOD123 formats), which offers PCB real estate savings and are considerably smaller than most competitive parts. The Glass Passivated Rectifier Diodes offer a forward current of 1 A with a choice of repetitive peak reverse voltage of 200 V up to 1000 V, with a 300 nS maximum recovery time. Tin Plated Connectors FRP Substrate and Epoxy Underfill Bourns® Chip Diodes conform to JEDEC standards, are easy to handle on standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Max. Average Forward Rectified Current CD1408- Unit F1200 F1400 F1600 F1800 F11000 VRRM 200 400 600 800 1000 V VRMS 140 280 420 560 700 V VDC 200 400 600 800 1000 V I(AV) 1.0 A DC Reverse Current @ Rated DC Blocking Voltage (@Ta = 25 °C) IR 5.0 μA DC Reverse Current @ Rated DC Blocking Voltage (@Ta = 125 °C) IR 30.0 μA DC Reverse Current @ Rated DC Blocking Voltage (@Ta = 150 °C) IR 50.0 μA Typical Junction Capacitance2 CJ 15 pF Instantaneous Forward Voltage @ IF = 1 A VF 1.3 V Maximum Reverse Recovery Time3 Trr 300 ns Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30.0 A Typical Thermal Resistance R j- a 80 °C/Watt Typical Thermal Resistance Rj-l 40 °C/Watt 1 Notes: 1 See Forward Derating Curve. 2 Measured @ 1.0 MHz and applied reverse voltage of 4.0 VDC. 3 Reverse recovery test condition: IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol CD1408-F1200~F11000 Unit TJ -65 to +175 °C TSTG -65 to +175 °C Operating Temperature Range Storage Temperature Range WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD1408-F1200~F11000 – Surface Mount Rectifier Diode Performance Graphs Maximum Non-Repetitive Surge Current Forward Current Derating Curve Peak Forward Surge Current (Amps) 30 Average Forward Current (Amps) 1.50 1.25 1.00 0.75 60 Hz Resistive or Inductive Load 0.50 0.25 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 25 20 15 10 0 0 0 50 75 100 125 150 175 1 200 10 100 Number of Cycles at 60 Hz Lead Temperature (°C) Typical Forward Characteristics Typical Reverse Characteristics 10.00 Pulse Width = 300 µs 1 % Duty Cycle Instantaneous Reverse Leakage Current (µA) Instantaneous Forward Current (Amps) 100 1.00 0.10 10 TJ = 150 °C 1 TJ = 125 °C TJ = 25 °C 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0 Instantaneous Forward Voltage (Volts) 20 40 60 80 100 110 Percent of Rated Peak Reverse Voltage (%) Typical Junction Capacitance 200 100 Junction Capacitance (pF) 60 40 20 10 6 4 TJ = 25 °C 2 1 0.1 0.2 0.4 1.0 2 4 10 Reverse Voltage (Volts) 20 40 100 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD1408-F1200~F11000 – Surface Mount Rectifier Diode Product Dimensions Recommended Footprint This is a lead free product, packaged with FRP substrate and is epoxy underfilled. The terminals are pure tin plated and are solderable per MIL-STD-750, Method 2026. The package weighs approximately 0.02 g. The package and dimensions are shown below. 3.2 - 3.60 (0.126 - 0.142) 1.70 - 2.10 (0.067 - 0.083) 0.40 R (0.016) 0.50 - 0.90 (0.020 - 0.035) 0.50 - 0.90 (0.020 - 0.035) The device will mount onto existing JEDEC SOD-87 footprint. How To Order CD 1408 - F 1 400 Common Code CD = Chip Diode Package 1408 = ~0.14 x 0.08 ˝ Function F = Fast Rectifier Forward Current I(AV) 1=1A Reverse Voltage 200 = 200 V 400 = 400 V 600 = 600 V 800 = 800 V 1000 = 1000 V Typical Part Marking CD1408-F1200 ........................................................................ B1 FD CD1408-F1400 ........................................................................ B1 FG CD1408-F1600 ........................................................................ B1 FJ CD1408-F1800 ........................................................................ B1 FK CD1408-F11000 ...................................................................... B1 FM 0.95 - 1.35 (0.037 - 0.053) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD1408-F1200~F11000 – Surface Mount Rectifier Diode Packaging Information The product will be dispensed in Tape and Reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... 10 pitches (min.) Leader ....... ....... 10 pitches (min.) Direction of Feed Item Symbol Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel — 3,000 A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. 1408 1.85 ± 0.1 (0.073 ± 0.004) 3.65 ± 0.1 (0.144 ± 0.004) 1.25 ± 0.1 (0.05 ± 0.004) 1.50 ± 0.1 (0.059 ± 0.004) 178 ± 2.0 (7.008 ± 0.079) 50 Min. (1.969) 13.0 ± 0.5 (0.512 ± 0.020) 1.75 ± 0.1 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 4.00 ± 0.1 (0.157 ± 0.004) 4.00 ± 0.1 (0.157 ± 0.004) 2.0 ± 0.1 (0.079 ± 0.002) 0.40 Max. (0.016) 12.00 ± 0.30 (0.472 ± 0.012) 18.7 Max. (0.736) Carrier Width W1 Start Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL