CD214A-R11200

M PL I AN T Features This series is obsolete and not recommended for new designs. Recommended replacement products are available. *R o HS CO RoHS compliant* Glass passivated chip Low reverse leakage current Low forward voltage drop High current capability CD214A-R150~R12000 Glass Passivated Rectifiers General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Glass Passivated Rectifiers for rectification applications, in compact chip DO-214AC (SMA) size format, which offer PCB real estate savings and are considerably smaller than most competitive parts. The Glass Passivated Rectifier Diodes offer a forward current of 1 A with a choice of repetitive peak reverse voltage of 50 V up to 2000 V. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle on standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Max. Average Forward Rectified Current1 Symbol R150 R1100 VRRM 50 VRMS VDC CD214A- Unit R1200 R1400 R1600 100 200 400 600 V 35 70 140 280 420 V 50 100 200 400 600 V E T E L O S B O I(AV) 1.0 A IR 5.0 μA IR 30 μA IR 50 μA CJ 12 pF VF 1.0 V Typical Thermal Resistance3 RθJA RθJL 75 27 °C/W °C/W Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 30 A DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 25 °C) DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 125 °C) DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 150 °C) Typical Junction Capacitance2 Maximum Instantaneous Forward Voltage @ 1 A Notes: 1 See Forward Derating Curve. 2 Measured @ 1.0 MHz and applied reverse voltage of 4.0 VDC. 3 Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 x 0.2 (5.0 mm x 5.0 mm) copper pad areas. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214A-R150~R12000 Glass Passivated Rectifiers Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage CD214A- Unit R1800 R11000 R11100 R11200 R11600 R12000 VRRM 800 1000 1100 1200 1600 2000 V VRMS 560 700 770 840 1120 1400 V Maximum DC Blocking Voltage VDC 800 1000 1100 1200 1600 2000 V Max. Average Forward Rectified Current1 I(AV) DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 25 °C) DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 125 °C) 1.0 A E T E L O S B O IR IR Typ. Junction Capacitance2 CJ Maximum Instantaneous Forward Voltage @ 1 A VF Typical Thermal Resistance3 RθJA RθJL Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 5.0 30 μA 50 μA 12 1.0 1.25 pF V 2.0 75 27 30 25 °C/W °C/W A 30 Notes: 1 See Forward Derating Curve. 2 Measured @ 1.0 MHz and applied reverse voltage of 4.0 VDC. 3 Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 ˝ x 0.2 ˝ (5.0 mm x 5.0 mm) copper pad areas. Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Operating Temperature Range Storage Temperature Range Symbol CD214A-R150~R12000 Unit TJ -65 to +175 °C TSTG -65 to +175 °C Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214A-R150~R12000 Glass Passivated Rectifiers Product Dimensions Recommended Pad Layout This is an RoHS compliant molded plastic package. The polarity is indicated by a cathode band and weighs approximately 0.064 g. The package and dimensions are shown below. 2.70 Max. (0.106) A 2.10 Max. (0.083) B 1.27 Max. (0.050) C E T E L O S B O DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................Molded plastic per UL Class 94V-0 Polarity ................................................Band indicates diode cathode Weight ....................................................0.002 ounces / 0.064 grams G F H D E DIMENSIONS: MM (INCHES) Dimensions DO-214AC (SMA) A 4.06 - 4.57 (0.160 - 0.180) B 2.29 - 2.92 (0.090 - 0.115) C 1.27 - 1.63 (0.050 - 0.064) D 0.15 - 0.31 (0.006 - 0.112) E 4.83 - 5.59 (0.190 - 0.220) F 0.05 - 0.20 (0.002 - 0.008) G 2.01 - 2.62 (0.080 - 0.103) H 0.76 - 1.52 (0.030 - 0.060) How To Order Common Code Chip Diode Package • 214A = SMA/DO-214AC Model R = Glass Passivated Rectifiers Forward Current I(AV) 1=1A Reverse Voltage 50 = 50 V 1000 100 = 100 V 1100 200 = 200 V 1200 400 = 400 V 1600 600 = 600 V 2000 800 = 800 V = = = = = 1000 1100 1200 1600 2000 CD 214A - R 1 50 V V V V V Typical Part Marking CD214A-R150 ...................................................................... CD214A-R1100 .................................................................... CD214A-R1200 .................................................................... CD214A-R1400 .................................................................... CD214A-R1600 .................................................................... CD214A-R1800 .................................................................... CD214A-R11000 .................................................................. CD214A-R11100 .................................................................. CD214A-R11200 .................................................................. CD214A-R11600 .................................................................. CD214A-R12000 .................................................................. R1A R1B R1D R1G R1J R1K R1M R1N R1Q R1Y R1Z Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214A-R150~R12000 Glass Passivated Rectifiers Rating and Characteristic Curves Forward Current Derating Curve Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Average Forward Current (Amps) 1.50 1.25 1.00 0.75 0.50 0.25 Single Phase Half Wave 60 Hz Resistive or Inductive Load 0 0 25 0 5 30 25 20 125 0 0 5 15 7 1 1 Lead Temperature (°C) 10 100 Number of Cycles at 60 Hz 10 R150-R11000 1.0 Instantaneous Forward Current (Amps) Instantaneous Forward Current (Amps) 10 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 10 E T E L O S B O 5 7 100 Forward Characteristics R150-R11000, R12000 R11100-R11600 15 R11100-R11600 0.1 Pulsewidth: 300 µs 1% Duty Cycle .01 6 . 0 0.8 4 1.0 . 0 2 . 1 1.4 1.6 Instantaneous Forward Voltage (Volts) R12000 1.0 0.1 Pulsewidth: 300 µs 1% Duty Cycle .01 5 . 0 1.0 0 1.5 0 . 2 2.5 3.0 Instantaneous Forward Voltage (Volts) Reverse Characteristics Instantaneous Reverse Leakage Current (µA) 100 TJ = 150 °C 10 TJ = 125 °C 1.0 TJ = 25 °C 0.1 0 20 40 60 80 100 120 Percent of Rated Peak Reverse Voltage (%) 14 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214A-R150~R12000 Glass Passivated Rectifiers Packaging Information The surface mount product is packaged in a 12 mm x 4 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D Carrier Depth C Sprocket Hole E T E L O S B O d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 P r e l i a r T A C e c i v e D r e d a e L ....... ....... ....... ....... ....... ....... ....... ....... End 10 pitches (min.) 10 pitches (min.) Start DIMENSIONS: MM (INCHES) Direction of Feed Item Carrier Width Carrier Length Symbol A B Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel — DO-214AC (SMA) 3.42 ± 0.10 (0.134 ± 0.004) 5.07 ± 0.10 (0.199 ± 0.004) 3.10 ± 0.10 (0.122 ± 0.004) 1.55 ± 0.05 (0.061 ± 0.002) 330 (12.992) 50.0 Min. (1.969) 13.0 ± 0.50 (0.512 ± 0.020) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.50 (0.217 ± 0.020) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.20 (0.420 ± 0.008) 18.7 Max. (0.736) 7,500 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 06/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. W1 Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL