CD214A-T20ALF

CD214A Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 60 Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 50 40 30 20 0 0 0 25 50 75 100 125 150 175 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 10 200 1 2 5 Pulse Waveform 50 100 10000 TA = 25 °C Peak value (IRSM) 100 IRSM Half value= 2 Capacitance (pF) IP, Peak Pulse Current (%) 20 Typical Junction Capacitance TR=10 µs Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP 1000 Unidirectional Bidirectional 100 0 0 0 1.0 2.0 3.0 0 4.0 10 Pulse Rating Curve 1000 Steady State Power Derating Curve 100 Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 5.0 mm Lead Areas 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) 1.0 TA = 25 °C 0.1 0.1 µs 100 Standoff Voltage (Volts) T, Time (ms) PP, Peak Power (KW) 10 Number of Cycles at 60 Hz Ambient Temperature (°C) 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.