CD214A-T75CALF

Features Model CD214A is currently available, although not recommended for new designs. Model SMAJ is preferred. ■ Lead free ■ RoHS compliant* ■ Surface Mount SMA package ■ Standoff Voltage: 5.0 to 170 volts ■ Power Dissipation: 400 watts CD214A Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AC (SMA) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Steady State Power Dissipation @ TL = 75 °C Symbol Value Unit PPK 400 Watts IFSM 40 Amps PM(AV) 1.0 Watts Maximum Instantaneous Forward Voltage @ IPP = 35 A (For Unidirectional Units Only) VF 3.5 Volts Operating Temperature Range TJ -55 to +150 °C TSTG -55 to +175 °C Storage Temperature Range 1. 2. 3. 4. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %. How to Order CD 214A - T 5.0 CA LF Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com Common Code Chip Diode Package 214A = SMA/DO-214AC 214B = SMB/DO-214AA 214C = SMC/DO-214AB Model T = Transient Voltage Suppressor Series Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) 170 = 170 VRWM (Volts) Suffix A = 5 % Tolerance Device CA = 5 % Tolerance Bidirectional Device Terminations LF = 100 % Sn (lead free) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Compliance ■ IEC 61000-4-2 ESD (Min. Level 4) ■ IEC 61000-4-4 EFT ■ IEC 61000-4-5 Surge CD214A Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part Number Part Marking Bidirectional Device Part Number Part Marking Breakdown Voltage VBR (Volts) Min. CD214A-T5.0A HE CD214A-T5.0CA TE 6.40 CD214A-T6.0A HG CD214A-T6.0CA TG 6.67 CD214A-T6.5A HK CD214A-T6.5CA TK 7.22 CD214A-T7.0A HM CD214A-T7.0CA TM 7.78 CD214A-T7.5A HP CD214A-T7.5CA TP 8.33 CD214A-T8.0A HR CD214A-T8.0CA TR 8.89 CD214A-T8.5A HT CD214A-T8.5CA TT 9.44 CD214A-T9.0A HV CD214A-T9.0CA TV 10.0 CD214A-T10A HX CD214A-T10CA TX 11.1 CD214A-T11A HZ CD214A-T11CA TZ 12.2 CD214A-T12A IE CD214A-T12CA UE 13.3 CD214A-T13A IG CD214A-T13CA UG 14.4 CD214A-T14A IK CD214A-T14CA UK 15.6 CD214A-T15A IM CD214A-T15CA UM 16.7 CD214A-T16A IP CD214A-T16CA UP 17.8 CD214A-T17A IR CD214A-T17CA UR 18.9 CD214A-T18A IT CD214A-T18CA UT 20.0 CD214A-T20A IV CD214A-T20CA UV 22.2 CD214A-T22A IX CD214A-T22CA UX 24.4 CD214A-T24A IZ CD214A-T24CA UZ 26.7 CD214A-T26A JE CD214A-T26CA VE 28.9 CD214A-T28A JG CD214A-T28CA VG 31.1 CD214A-T30A JK CD214A-T30CA VK 33.3 CD214A-T33A JM CD214A-T33CA VM 36.7 CD214A-T36A JP CD214A-T36CA VP 40 CD214A-T40A JR CD214A-T40CA VR 44.4 CD214A-T43A JT CD214A-T43CA VT 47.8 CD214A-T45A JV CD214A-T45CA VV 50 CD214A-T48A JX CD214A-T48CA VX 53.3 CD214A-T51A JZ CD214A-T51CA VZ 56.7 CD214A-T54A RE CD214A-T54CA WE 60 CD214A-T58A RG CD214A-T58CA WG 64.4 CD214A-T60A RK CD214A-T60CA WK 66.7 CD214A-T64A RM CD214A-T64CA WM 71.1 CD214A-T70A RP CD214A-T70CA WP 77.8 CD214A-T75A RR CD214A-T75CA WR 83.3 CD214A-T78A RT CD214A-T78CA WT 86.7 CD214A-T85A RV CD214A-T85CA WV 94.4 CD214A-T90A RX CD214A-T90CA WX 100 CD214A-T100A RZ CD214A-T100CA WZ 111 CD214A-T110A SE CD214A-T110CA XE 122 CD214A-T120A SG CD214A-T120CA XG 133 CD214A-T130A SK CD214A-T130CA XK 144 CD214A-T150A SM CD214A-T150CA XM 167 CD214A-T160A SP CD214A-T160CA XP 178 CD214A-T170A SR CD214A-T170CA XR 189 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Max. Working Peak Reverse Voltage @ IT (mA) VRWM (Volts) Maximum Reverse Leakage @ VRWM IR (μA) Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current VRSM (Volts) IRSM (Amps) 7.00 10 5.0 800 / 1600 9.2 43.5 7.37 10 6.0 800 / 1600 10.3 38.8 7.98 10 6.5 500 / 1000 11.2 35.7 8.60 10 7.0 200 / 400 12.0 33.3 9.21 1.0 7.5 100 / 200 12.9 31.0 9.83 1.0 8.0 50 / 100 13.6 29.4 10.4 1.0 8.5 10 / 20 14.4 27.7 11.1 1.0 9.0 5 / 10 15.4 26.0 12.3 1.0 10 5 / 10 17.0 23.5 13.2 1.0 11 5.0 18.2 22.0 14.7 1.0 12 5.0 19.9 20.1 15.9 1.0 13 5.0 21.5 18.6 17.2 1.0 14 5.0 23.2 17.2 18.5 1.0 15 5.0 24.4 16.4 19.7 1.0 16 5.0 26.0 15.3 20.9 1.0 17 5.0 27.6 14.5 22.1 1.0 18 5.0 29.2 13.7 24.5 1.0 20 5.0 32.4 12.3 26.9 1.0 22 5.0 35.5 11.2 29.5 1.0 24 5.0 38.9 10.3 31.9 1.0 26 5.0 42.1 9.5 34.4 1.0 28 5.0 45.4 8.8 36.8 1.0 30 5.0 48.4 8.3 40.6 1.0 33 5.0 53.3 7.5 44.2 1.0 36 5.0 58.1 6.9 49.1 1.0 40 5.0 64.5 6.2 52.8 1.0 43 5.0 69.4 5.7 55.3 1.0 45 5.0 72.7 5.5 58.9 1.0 48 5.0 77.4 5.2 62.7 1.0 51 5.0 82.4 4.9 66.3 1.0 54 5.0 87.1 4.6 71.2 1.0 58 5.0 93.6 4.3 73.7 1.0 60 5.0 96.8 4.1 78.6 1.0 64 5.0 103 3.9 86.0 1.0 70 5.0 113 3.5 92.1 1.0 75 5.0 121 3.3 95.8 1.0 78 5.0 126 3.2 104 1.0 85 5.0 137 2.9 111 1.0 90 5.0 146 2.7 123 1.0 100 5.0 162 2.5 135 1.0 110 5.0 177 2.3 147 1.0 120 5.0 193 2.0 159 1.0 130 5.0 209 1.9 185 1.0 150 5.0 243 1.6 197 1.0 160 5.0 259 1.5 209 1.0 170 5.0 275 1.4 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine Wave of 8.3 ms Pulse Width. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214A Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D B (Min.) E C (Min.) Dimension A B C D E F G H SMA (DO-214AC) 4.06 - 4.57 (0.160 - 0.180) 2.29 - 2.92 (0.090 - 0.115) 1.27 - 1.63 (0.050 - 0.064) 0.15 - 0.31 (0.006 - 0.012) 4.83 - 5.59 (0.190 - 0.220) 0.05 - 0.20 (0.002 - 0.008) 2.01 - 2.62 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMA (DO-214AC) 2.70 (0.106) 2.10 (0.083) 1.27 (0.050) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight ....................................................0.002 ounces / 0.064 grams MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214A Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current 60 Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 50 40 30 20 0 0 0 25 50 75 100 125 150 175 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 10 200 1 2 5 Pulse Waveform 50 100 10000 TA = 25 °C Peak value (IRSM) 100 IRSM Half value= 2 Capacitance (pF) IP, Peak Pulse Current (%) 20 Typical Junction Capacitance TR=10 µs Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP 1000 Unidirectional Bidirectional 100 0 0 0 1.0 2.0 3.0 0 4.0 10 Pulse Rating Curve 1000 Steady State Power Derating Curve 100 Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 5.0 mm Lead Areas 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) 1.0 TA = 25 °C 0.1 0.1 µs 100 Standoff Voltage (Volts) T, Time (ms) PP, Peak Power (KW) 10 Number of Cycles at 60 Hz Ambient Temperature (°C) 0.8 0.6 0.4 0.2 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214A Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... Leader W1 ....... ....... 10 pitches (min.) Start 10 pitches (min.) DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- SMA (DO-214AC) 2.90 ± 0.10 (0.114 ± 0.004) 5.59 ± 0.10 (0.220 ± 0.004) 2.36 ± 0.10 (0.093 ± 0.004) 1.55 ± 0.05 (0.061 ± 0.002) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 5.50 ± 0.05 (0.217 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.30 ± 0.10 (0.012 ± 0.004) 12.00 ± 0.20 (0.472 ± 0.008) 18.4 MAX. (0.724) 5,000 REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL