CD214B-R2100

PL IA NT Features This series is obsolete and not recommended for new designs. Recommended replacement products are available. *R oH S CO M RoHS compliant* Glass passivated chip Low reverse leakage current Low forward voltage drop High current capability CD214B-R250~R21000 Glass Passivated Rectifiers General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Glass Passivated Rectifiers for rectification applications, in compact chip DO-214AA (SMB) size format, which offer PCB real estate savings and are considerably smaller than most competitive parts. The Glass Passivated Rectifier Diodes offer a forward current of 2.0 A with a choice of repetitive peak reverse voltage of 50 V up to 1000 V. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle on standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Max. Average Forward Rectified Current1 Symbol CD214B- Unit R250 R2100 R2200 R2400 R2600 R2800 R21000 VRRM 50 100 200 400 600 800 1000 V VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V E T E L O S B O I(AV) 2.0 A IR 5.0 μA IR 30 μA CJ 25 pF VF 1.0 V Typical Thermal Resistance3 RθJL 16 °C/W Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 65 A DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 25 °C) DC Reverse Current @ Rated DC Blocking Voltage (@TJ = 125 °C) Typical Junction Capacitance2 Maximum Instantaneous Forward Voltage @ 1 A Notes: 1 See Forward Derating Curve. 2 Measured @ 1.0 MHz and applied reverse voltage of 4.0 VDC. 3 Thermal resistance from junction to ambient and from junction to lead P.C.B. mounted on 0.2 ˝ x 0.2 ˝ (5.0 mm x 5.0 mm) copper pad areas. Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Operating Temperature Range Storage Temperature Range Symbol CD214B-R250~R21000 Unit TJ -65 to +175 °C TSTG -65 to +170 °C WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214B-R250~R21000 Glass Passivated Rectifiers Product Dimensions Recommended Pad Layout This is an RoHS compliant product. It is a molded plastic package. A cathode band indicates the polarity. The package weighs approximately 0.064 g. The package and dimensions are shown below. A A B B C MM (INCHES) E T E L O S B O DIMENSIONS: Dimension A (Max.) B (Min.) C (Min.) C SMB (DO-214AA) 2.69 (0.106) 2.10 (0.083) 1.27 (0.050) How To Order D H G E F Dimensions A 4.06 - 4.57 (0.167 - 0.187) B 3.30 - 3.94 (0.130 - 0.150) C 1.96 - 2.21 (0.075 - 0.087) D 2.01 - 2.62 (0.079 - 0.096) E 0.76 - 1.52 (0.039 - 0.055) F 5.21 - 5.59 (0.197 - 0.236) G 0.05 - 0.20 (0.00196 - 0.00787) H 0.15 - 0.31 (0.006 - 0.016) DIMENSIONS: CD 214B - R 2 50 Common Code Chip Diode Package • 214B = SMB/DO-214AA Model R = Glass Pasivated Rectifiers Forward Current I(AV) 2=2A Reverse Voltage 50 = 50 V 100 = 100 V 200 = 200 V 400 = 400 V 600 = 600 V 800 = 800 V 1000 = 1000 V MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214B-R250~R21000 Glass Passivated Rectifiers Rating and Characteristic Curves Forward Current Derating Curve Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Average Forward Current (Amps) 2.00 1.50 1.25 1.00 0.75 0.50 0 25 50 75 80 60 40 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) E T E L O S B O Single Phase Half Wave 60 Hz Resistive or Inductive Load 0.25 100 100 125 150 175 20 0 10 1 Lead Temperature (°C) Forward Characteristics Reverse Characteristics 100 1.0 0.1 Instantaneous Reverse Leakage Current (mA) 10 Instantaneous Forward Current (Amps) 100 Number of Cycles at 60 Hz Pulsewidth: 300 µs 1% Duty Cycle TJ = 150 °C 10 TJ = 125 °C 1.0 TJ = 25 °C 0.1 .01 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage (Volts) 1.6 0 20 40 60 80 100 110 Percent of Rated Peak Reverse Voltage (%) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214B-R250~R21000 Glass Passivated Rectifiers Packaging Information The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer E T E L O S B O C Device Leader ....... ....... ....... ....... ....... ....... ....... ....... End 10 pitches (min.) 10 pitches (min.) W1 Start DIMENSIONS: MM (INCHES) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel — DO-214AA (SMB) 1.90 ±0.10 (0.075 - 0.004) 4.30 ±0.10 (0.169 - 0.004) 1.80 ±0.10 (0.071 - 0.004) 1.55 ±0.05 (0.061 - 0.002) 178 (7.008) 80.0 Min. (3.150) 13.0 ±0.20 (0.512 - 0.008) 1.75 ±0.10 (0.069 - 0.004) 3.50 ±0.05 (0.138 - 0.002) 4.00 ±0.10 (0.157 - 0.004) 4.00 ±0.10 (0.157 - 0.004) 2.00 ±0.05 (0.079 - 0.002) 0.20 ±0.10 (0.008 - 0.004) 8.00 ±0.20 (0.315 - 0.008) 13.5 Max. (0.531) 2,500 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 06/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL