Features
Applications
n RoHS compliant*
n Switch Mode Power Supplies
n Low profile
n Portable equipment batteries
n Low power loss, high efficiency
n High frequency rectification
n UL 94V-0 rating
n DC/DC Converters
n Halogen free**
n Telecommunications
CD214B-S2x Series Rectifier Chip Diode
General Information
Portable communications, computing and video equipment manufacturers are
challenging the semiconductor industry to develop increasingly smaller electronic
components.
Bourns offers Glass Passivated Rectifier Diodes for rectification applications, in a
compact chip package compatible with DO-214AA (SMB) size format. The Glass
Passivated Rectifier Diodes offer a forward current of 2 A with a choice of repetitive
peak reverse voltage of 200 V up to 1000 V.
Absolute Maximum Ratings (@ TA = 25 °C Unless Otherwise Noted)
Parameter
Symbol
Maximum Repetitive Peak Reverse Voltage
Maximum Average Forward Current
Maximum Peak Forward Surge Current
(8.3 ms Single Half Sine-Wave)
Operating Junction Temperature Range
Storage Temperature Range
VRRM
S2D
200
S2G
400
CD214BS2J
600
S2K
800
S2M
1000
Unit
V
IF(AV)
2
A
IFSM
50
A
TOPR
-65 to +175
°C
-65 to +175
°C
TSTG
Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted)
Parameter
Maximum Instantaneous
Forward Voltage (NOTE 1)
DC Reverse Current
Typical Junction Capacitance
Typical
Thermal
Resistance
(NOTE 2)
Symbol
Condition or Model
VF
IR
CJ
Min.
Typ.
Max.
Unit
IF = 2 A
0.96
1.00
V
VR = VRRM
VR = 4 V, f = 1.0 MHz
0.10
14
5
µA
pF
Junction to
Ambient
RθJA
130
Junction to
Lead
RθJL
50
°C/W
NOTES:
(1) Pulse width 300 microsecond, 1 % duty cycle.
(2) Mounted on PCB with 5.0 x 5.0 mm (0.2 x 0.2 inch) copper pad areas.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
* RoHS Directive 2015/863, Mar 31, 2015 and Annex.
** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and
Chlorine (Cl) content is 1500 ppm or less.
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
CD214B-S2x
3312 - 2 Series
mm SMD
Trimming
Potentiometer
Rectifier
Chip Diode
Performance Graphs
Max. Peak Forward Surge Current
60
60
60
2.5
2.5
2.5
PeakForward
ForwardSurge
SurgeCurrent
Current
Peak
(Amps)
(Amps)
AverageForward
ForwardRectified
RectifiedCurrent
Current
Average
(Amps)
(Amps)
Forward Current Derating Curve
2.0
2.0
2.0
1.5
1.5
1.5
1.0
1.0
1.0
0.5
0.5
0.5
000
000
60
60
60Hz
Hz
Hz
RESISTIVE
RESISTIVE
RESISTIVEOR
OR
OR
INDUCTIVE
INDUCTIVE
INDUCTIVELOAD
LOAD
LOAD
25
25
25
50
50
50
75
75
75
100
100
100
125
125
125
150
150
150
175
175
175
50
50
50
40
40
40
30
30
30
20
20
20
10
10
10
000
000
Lead
Lead
Lead Temperature
Temperature
Temperature (°C)
(°C)
(°C)
InstantaneousReverse
ReverseLeakage
LeakageCurrent
Current(µA)
(µA)
Instantaneous
InstantaneousForward
ForwardCurrent
Current(A)
(A)
Instantaneous
111
0.1
0.1
0.1
0.6
0.6
0.6
0.8
0.8
0.8
1.0
1.0
1.0
100
100
100
Typical Reverse Characteristics
10
10
10
0.4
0.4
0.4
10
10
10
Number
Number
Number of
of
of Cycles
Cycles
Cycles @
@
@ 60
60
60 Hz
Hz
Hz
Typical Instantaneous Forward Characteristics
0.01
0.01
0.01
0.2
0.2
0.2
8.3
8.3
8.3ms
ms
ms
Single
Single
SingleHalf
Half
Half
Sine-Wave
Sine-Wave
Sine-Wave
(JEDEC
(JEDEC
(JEDECMethod)
Method)
Method)
1.2
1.2
1.2
1.4
1.4
1.4
Instantaneous
Instantaneous
Instantaneous Forward
Forward
Forward Voltage
Voltage
Voltage (Volts)
(Volts)
(Volts)
100
100
100
TTTJ ===150
150°C
°C
°C
JJ 150
10
10
10
TTTJ ===125
125°C
°C
°C
JJ 125
111
0.1
0.1
0.1
0.01
0.01
0.01
0.001
0.001
0.001
000
TTTJ ===25
25°C
°C
°C
JJ 25
20
20
20
40
40
40
60
60
60
80
80
80
100
100
100
Percent
Percent
Percent of
of
of Rated
Rated
Rated Peak
Peak
Peak Reverse
Reverse
Reverse Voltage
Voltage
Voltage (%)
(%)
(%)
JunctionCapacitance
Capacitance(pF)
(pF)
Junction
Typical Junction Capacitance
200
200
200
100
100
100
10
10
10
111
0.1
0.1
0.1
TTTJ ===25
25°C
°C
°C
JJ 25
1.0
1.0
1.0
10
10
10
Reverse
Reverse
Reverse Voltage
Voltage
Voltage (Volts)
(Volts)
(Volts)
100
100
100
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
3312 - 2 mm
SMD
Trimming
Potentiometer
CD214B-S2x
Series
Rectifier
Chip Diode
Product Dimensions
Recommended Pad Layout
A
A
G
G
B
D
DIA.
C
B
C
D
DIA.
H
H
I
I
E
E
E
E
Dimension
CD214B-S2 Series
G
2.65 MAX.
(0.104)
H
3.00 MIN.
(0.118)
I
6.65 REF.
(0.262)
F
F
Dimension
CD214B-S2 Series
A
5.20 ± 0.10
(0.205 ± 0.004)
B
3.60 ± 0.10
(0.142 ± 0.004)
C
3.01 TYP.
TYP.
(0.119)
D (Dia.)
6.95 TYP.
TYP.
(0.027)
E
1.15 ± 0.1
(0.045 ± 0.004)
F
1.20 ± 0.15
(0.047 ± 0.006)
Environmental Specifications
Moisture Sensitivity Level.................................................................1
ESD Classification (HBM)............................................................. 1C
How to Order
MM
DIMENSIONS:
(INCHES)
Typical Part Marking
DATE CODE:
Y = LAST
DIGIT OF
YEAR
WW = WEEK
NUMBER
S2D
YWW
MM
DIMENSIONS:
(INCHES)
DEVICE CODE:
S2D = CD214B-S2D
S2G = CD214B-S2G
S2J = CD214B-S2J
S2K = CD214B-S2K
S2M = CD214B-S2M
CD 214B - S 2 D
Common Code
CD = Chip Diode
Package
214B = SMB/DO-214AA Compatible
Model
S = Glass Passivated Rectifier Series
Maximum Average Forward Rectified Current
2=2A
Maximum Repetitive Peak Reverse Voltage
D = 200 V
G = 400 V
J = 600 V
K = 800 V
M = 1000 V
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
3312 - 2 mm
SMD
Trimming
Potentiometer
CD214B-S2x
Series
Rectifier
Chip Diode
Packaging Information
The product is dispensed in tape and reel format (see diagram below).
P
0
P
1
d
T
E
Index Hole
120 °
F
D1 D
P
A
Trailer
End
D2
W
B
.......
.......
C
Device
.......
.......
Leader
.......
.......
.......
.......
30 pitches
Start
W1
MM
DIMENSIONS:
(INCHES)
30 pitches
Direction of Feed
Item
Symbol
CD214B-S2 Series
Carrier Width
A
3.70 ± 0.10
(0.146 ± 0.004)
Carrier Length
B
5.40 ± 0.10
(0.213 ± 0.004)
Carrier Depth
C
1.65 ± 0.10
(0.065 ± 0.004)
Sprocket Hole
d
1.50 ± 0.10
(0.059 ± 0.004)
Reel Outside Diameter
D
330 ± 2.0
(12.992 ± 0.079)
Reel Inner Diameter
D1
50.0
MIN.
(1.969)
D2
13.0 ± 0.50
(0.512 ± 0.020)
Sprocket Hole Position
E
1.75 ± 0.10
(0.069 ± 0.004)
Punch Hole Position
F
5.50 ± 0.05
(0.217 ± 0.002)
Punch Hole Pitch
P
8.00 ± 0.10
(0.315 ± 0.004)
Sprocket Hole Pitch
P0
4.00 ± 0.10
(0.157 ± 0.004)
Embossment Center
P1
2.00 ± 0.10
(0.079 ± 0.004)
Feed Hole Diameter
Overall Tape Thickness
T
Tape Width
W
Reel Width
W1
Quantity per Reel
--
Asia-Pacific:
Tel: +886-2 2562-4117
Email: asiacus@bourns.com
Europe:
Tel: +36 88 885 877
Email: eurocus@bourns.com
The Americas:
Tel: +1-951 781-5500
Email: americus@bourns.com
www.bourns.com
0.40
MAX.
(0.016)
12.00 ± 0.30
(0.472 ± 0.012)
18.7
MAX.
(0.736)
5,000
REV. 03/20
Specifications are subject to change without notice.
Users should verify actual device performance in their specific applications.
The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.
Legal Disclaimer Notice
This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its
affiliates (collectively, “Bourns”).
Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change
without notice. Users should check for and obtain the latest relevant information and verify that such information is current and
complete before placing orders for Bourns® products.
The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and
statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical
requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary
from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components
in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns®
product also can and do vary in different applications and actual performance may vary over time. Users should always verify
the actual performance of the Bourns® product in their specific devices and applications, and make their own independent
judgments regarding the amount of additional test margin to design into their device or application to compensate for
differences between laboratory and real world conditions.
Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry
standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any
failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of
Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their
devices or applications.
Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or
environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a
case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s
sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and
generally equivalent classifications outside of the United States.
Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such
products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two
authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive
application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns
expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment
or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns®
standard product is considered for potential use in automotive applications, it should only be used in such sub-category of
automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard
or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application.
Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally
or any other generally equivalent governmental organization standard applicable to products designed or manufactured for
use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft
or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically
approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard
product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the
user’s sole risk.
The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and
the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the
user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply
to such Bourns® custom products.
Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the
design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use
Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions
apply to all uses and applications that violate national or international prohibitions, including embargos or international
regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be
exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior
authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible
to receive U.S. commodities, software, and technical data.
To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential,
incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties
of fitness for particular purpose, non-infringement and merchantability.
For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese
bilingual versions are available at:
Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies
PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf
C1753 05/17/18R
