CD214L-T150CALF

RoHS compliant* Surface Mount SMC package Standoff Voltage: 5.0 to 170 volts Power Dissipation: 3000 watts *R oH S CO M PL IA NT Model CD214L is currently available, although not recommended for new designs. Model SMLJ is preferred. Features CD214L Transient Voltage Suppressor Diode Series General Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Steady State Power Dissipation @ TL = 75 °C Symbol Value Unit PPK 3000 Watts IFSM 300 Amps PM(AV) 5.0 Watts Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF (Note 5) Volts Operating Temperature Range TJ -55 to +150 °C TSTG -55 to +175 °C Storage Temperature Range 1. 2. 3. 4. 5. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %. VF = 3.5 V on CD214L-T5.0ALF through CD214L-T90ALF and VF = 5.0 V on CD214L-T100ALF through CD214L-T170ALF. How To Order CD 214L - T 5.0 CA LF Common Code Chip Diode Package 214L = 3 kW SMC/DO-214AB Model T = Transient Voltage Suppressor Series Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) 170 = 170 VRWM (Volts) Suffix A = 5 % Tolerance Device CA = 5 % Tolerance Bidirectional Device Terminations LF = 100 % Sn (RoHS Compliant) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Compliance IEC 61000-4-2 ESD (Min. Level 4) IEC 61000-4-4 EFT IEC 61000-4-5 Surge CD214L Transient Voltage Suppressor Diode Series Electrical Characteristics (@TA = 25 °C unless otherwise noted) Unidirectional Device Part Number CD214L-T5.0ALF CD214L-T6.0ALF CD214L-T6.5ALF CD214L-T7.0ALF CD214L-T7.5ALF CD214L-T8.0ALF CD214L-T8.5ALF CD214L-T9.0ALF CD214L-T10ALF CD214L-T11ALF CD214L-T12ALF CD214L-T13ALF CD214L-T14ALF CD214L-T15ALF CD214L-T16ALF CD214L-T17ALF CD214L-T18ALF CD214L-T20ALF CD214L-T22ALF CD214L-T24ALF CD214L-T26ALF CD214L-T28ALF CD214L-T30ALF CD214L-T33ALF CD214L-T36ALF CD214L-T40ALF CD214L-T43ALF CD214L-T45ALF CD214L-T48ALF CD214L-T51ALF CD214L-T54ALF CD214L-T58ALF CD214L-T60ALF CD214L-T64ALF CD214L-T70ALF CD214L-T75ALF CD214L-T78ALF CD214L-T85ALF CD214L-T90ALF CD214L-T100ALF CD214L-T110ALF CD214L-T120ALF CD214L-T130ALF CD214L-T150ALF CD214L-T160ALF CD214L-T170ALF Part Marking HDE HDG HDK HDM HDP HDR HDT HDV HDX HDZ HEE HEG HEK HEM HEP HER HET HEV HEX HEZ HFE HFG HFK HFM HFP HFR HFT HFV HFX HFZ HGE HGG HGK HGM HGP HGR HGT HGV HGX HGZ HHE HHG HHH HHM HHP HHR Bidirectional Device Part Number CD214L-T5.0CALF CD214L-T6.0CALF CD214L-T6.5CALF CD214L-T7.0CALF CD214L-T7.5CALF CD214L-T8.0CALF CD214L-T8.5CALF CD214L-T9.0CALF CD214L-T10CALF CD214L-T11CALF CD214L-T12CALF CD214L-T13CALF CD214L-T14CALF CD214L-T15CALF CD214L-T16CALF CD214L-T17CALF CD214L-T18CALF CD214L-T20CALF CD214L-T22CALF CD214L-T24CALF CD214L-T26CALF CD214L-T28CALF CD214L-T30CALF CD214L-T33CALF CD214L-T36CALF CD214L-T40CALF CD214L-T43CALF CD214L-T45CALF CD214L-T48CALF CD214L-T51CALF CD214L-T54CALF CD214L-T58CALF CD214L-T60CALF CD214L-T64CALF CD214L-T70CALF CD214L-T75CALF CD214L-T78CALF CD214L-T85CALF CD214L-T90CALF CD214L-T100CALF CD214L-T110CALF CD214L-T120CALF CD214L-T130CALF CD214L-T150CALF CD214L-T160CALF CD214L-T170CALF Part Marking IDE IDG IDK IDM IDP IDR IDT IDV IDX IDZ IEE IEG IEK IEM IEP IER IET IEV IEX IEZ IFE IFG IFK IFM IFP IFR IFT IFV IFX IFZ IGE IGG IGK IGM IGP IGR IGT IGV IGX IGZ IHE IHG IHH IHM IHP IHR Notes: 1. Suffix ‘A’ denotes a 5 % tolerance device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Breakdown Voltage VBR (Volts) Min. Max. @ IT (mA) 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.00 11.10 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 7.82 8.15 7.98 8.60 9.21 9.83 10.43 11.05 12.27 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 27.00 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.30 110.50 122.70 134.80 147.00 159.20 184.60 196.70 208.90 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Maximum Reverse Voltage @IRSM Maximum Reverse Surge Current VRWM (Volts) Maximum Reverse Leakage @ VRWM IR (uA) VRSM (Volts) IRSM (Amps) 5 6 6.5 7 7.5 8 8.5 9 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 1000 1000 500 200 100 50 25 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 9.2 10.3 11.2 12 12.9 13.6 14.4 15.4 17 18.2 19.9 21.5 23.2 24.4 26 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 326.00 291.30 267.90 250.00 232.60 220.60 208.40 194.80 176.40 164.80 150.60 139.40 129.40 123.00 115.40 106.60 102.80 92.60 84.40 77.20 71.20 66.00 62.00 56.20 51.60 46.40 43.20 41.20 38.80 36.40 34.40 32.00 31.00 29.20 26.60 24.80 22.80 20.80 20.60 18.60 16.80 15.60 14.40 12.40 11.60 11.00 Working Peak Reverse Voltage 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine Wave of 8.3 ms Pulse Width. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214L Transient Voltage Suppressor Diode Series Product Dimensions Recommended Pad Layout A A B C B C G Dimension A (Max.) F H D E Dimension A B C D E F G H SMC (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.92 - 3.18 (0.115 - 0.125) 0.15 - 0.31 (0.006 - 0.112) 7.75 - 8.13 (0.305 - 0.320) 0.05 - 0.20 (0.002 - 0.008) 2.01 - 2.62 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: B (Min.) C (Min.) SMC (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................Molded plastic per UL Class 94V-0 Polarity ........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight ......................................................0.007 ounces / 0.21 grams MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214L Transient Voltage Suppressor Diode Series Rating and Characteristic Curves Maximum Non-Repetitive Surge Current Pulse Derating Curve Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 200 100 0 Pulse Width 8.3 ms Single Half Sine-Wave (JEDEC Method) 10 25 0 50 75 100 125 150 175 200 1 2 5 Ambient Temperature ( °C) Peak value (IRSM) 100 100 Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP 0 0 2.0 1.0 TA = 25 °C Unidirectional IRSM Half value= 2 Capacitance (pF) IP, Peak Pulse Current (%) 50 10000 TR=10 µs 3.0 1000 Bidirectional 100 0 4.0 0 10 T, Time (ms) 100 1000 Standoff Voltage (Volts) Pulse Rating Curve Steady State Power Derating Curve 5.0 TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 10 1.0 8.0 mm Lead Areas 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 m RM(AV) Steady State Power Dissipation (W) 100 0.1 0.1 µs 20 Typical Junction Capacitance Pulse Waveform PP, Peak Power (KW) 10 Number of Cycles at 60 Hz 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214L Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in Tape and Reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer End C Device Leader W1 ....... ....... ....... ....... ....... ....... ....... ....... Start DIMENSIONS: 10 pitches (min.) 10 pitches (min.) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item MM (INCHES) Symbol Overall Tape Thickness T Tape Width W Reel Width W1 SMC (DO-214AB) 7.22 ± 0.10 (0.284 - 0.004) 8.11 ± 0.10 (0.319 - 0.004) 2.36 ± 0.10 (0.093 - 0.004) 1.55 ± 0.05 (0.061 - 0.002) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 - 0.008) 1.75 ± 0.10 (0.069 - 0.004) 7.50 ± 0.10 (0.295 - 0.004) 4.00 ± 0.10 (0.157 - 0.004) 4.00 ± 0.10 (0.157 - 0.004) 2.00 ± 0.10 (0.079 - 0.004) 0.30 ± 0.10 (0.012 - 0.004) 16.00 ± 0.20 (0.630 - 0.008) 22.4 MAX. (0.882) -- 3,000 Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Quantity per Reel REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL