CD214L-T33ALF

Features Model CD214L is currently available, although not recommended for new designs. Model SMLJ is preferred. ■ RoHS compliant* ■ Surface Mount SMC package ■ Standoff Voltage: 5.0 to 170 volts ■ Power Dissipation: 3000 watts CD214L Transient Voltage Suppressor Diode Series General Information Additional Information The markets of portable communications, computing and video equipment are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications, in compact chip package DO-214AB (SMC) size format. The Transient Voltage Suppressor series offers a choice of Working Peak Reverse Voltage from 5 V up to 170 V and Breakdown Voltage up to 200 V. Typical fast response times are less than 1.0 ns for unidirectional devices and less than 5.0 ns for bidirectional devices from 0 V to Minimum Breakdown Voltage. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and their flat configuration minimizes roll away. Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Minimum Peak Pulse Power Dissipation (TP = 1 ms) (Note 1,2) Peak Forward Surge Current 8.3 ms Single Half Sine Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Steady State Power Dissipation @ TL = 75 °C Symbol Value Unit PPK 3000 Watts IFSM 300 Amps PM(AV) 5.0 Watts Maximum Instantaneous Forward Voltage @ IPP = 100 A (For Unidirectional Units Only) VF (Note 5) Volts Operating Temperature Range TJ -55 to +150 °C TSTG -55 to +175 °C Storage Temperature Range 1. 2. 3. 4. 5. Non-repetitive current pulse, per Pulse Waveform graph and derated above TA = 25 °C per Pulse Derating Curve. Thermal Resistance Junction to Lead. 8.3 ms Single Half-Sine Wave duty cycle = 4 pulses maximum per minute (unidirectional units only). Single Phase, Half Wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20 %. VF = 3.5 V on CD214L-T5.0ALF through CD214L-T90ALF and VF = 5.0 V on CD214L-T100ALF through CD214L-T170ALF. How to Order CD 214L - T 5.0 CA LF Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - Common Code Chip Diode Package 214L = 3 kW SMC/DO-214AB Model T = Transient Voltage Suppressor Series Working Peak Reverse Voltage 5.0 = 5.0 VRWM (Volts) 170 = 170 VRWM (Volts) Suffix A = 5 % Tolerance Device CA = 5 % Tolerance Bidirectional Device Terminations LF = 100 % Sn (RoHS Compliant) www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Compliance ■ IEC 61000-4-2 ESD (Min. Level 4) ■ IEC 61000-4-4 EFT ■ IEC 61000-4-5 Surge CD214L Transient Voltage Suppressor Diode Series Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Unidirectional Device Part Number Part Marking Bidirectional Device Part Number Part Marking Breakdown Voltage VBR (Volts) Min. CD214L-T5.0ALF HDE CD214L-T5.0CALF IDE 6.40 CD214L-T6.0ALF HDG CD214L-T6.0CALF IDG 6.67 CD214L-T6.5ALF HDK CD214L-T6.5CALF IDK 7.22 CD214L-T7.0ALF HDM CD214L-T7.0CALF IDM 7.78 CD214L-T7.5ALF HDP CD214L-T7.5CALF IDP 8.33 CD214L-T8.0ALF HDR CD214L-T8.0CALF IDR 8.89 CD214L-T8.5ALF HDT CD214L-T8.5CALF IDT 9.44 CD214L-T9.0ALF HDV CD214L-T9.0CALF IDV 10.00 CD214L-T10ALF HDX CD214L-T10CALF IDX 11.10 CD214L-T11ALF HDZ CD214L-T11CALF IDZ 12.20 CD214L-T12ALF HEE CD214L-T12CALF IEE 13.30 CD214L-T13ALF HEG CD214L-T13CALF IEG 14.40 CD214L-T14ALF HEK CD214L-T14CALF IEK 15.60 CD214L-T15ALF HEM CD214L-T15CALF IEM 16.70 CD214L-T16ALF HEP CD214L-T16CALF IEP 17.80 CD214L-T17ALF HER CD214L-T17CALF IER 18.90 CD214L-T18ALF HET CD214L-T18CALF IET 20.00 CD214L-T20ALF HEV CD214L-T20CALF IEV 22.20 CD214L-T22ALF HEX CD214L-T22CALF IEX 24.40 CD214L-T24ALF HEZ CD214L-T24CALF IEZ 26.70 CD214L-T26ALF HFE CD214L-T26CALF IFE 28.90 CD214L-T28ALF HFG CD214L-T28CALF IFG 31.10 CD214L-T30ALF HFK CD214L-T30CALF IFK 33.30 CD214L-T33ALF HFM CD214L-T33CALF IFM 36.70 CD214L-T36ALF HFP CD214L-T36CALF IFP 40.00 CD214L-T40ALF HFR CD214L-T40CALF IFR 44.40 CD214L-T43ALF HFT CD214L-T43CALF IFT 47.80 CD214L-T45ALF HFV CD214L-T45CALF IFV 50.00 CD214L-T48ALF HFX CD214L-T48CALF IFX 53.30 CD214L-T51ALF HFZ CD214L-T51CALF IFZ 56.70 CD214L-T54ALF HGE CD214L-T54CALF IGE 60.00 CD214L-T58ALF HGG CD214L-T58CALF IGG 64.40 CD214L-T60ALF HGK CD214L-T60CALF IGK 66.70 CD214L-T64ALF HGM CD214L-T64CALF IGM 71.10 CD214L-T70ALF HGP CD214L-T70CALF IGP 77.80 CD214L-T75ALF HGR CD214L-T75CALF IGR 83.30 CD214L-T78ALF HGT CD214L-T78CALF IGT 86.70 CD214L-T85ALF HGV CD214L-T85CALF IGV 94.40 CD214L-T90ALF HGX CD214L-T90CALF IGX 100.00 CD214L-T100ALF HGZ CD214L-T100CALF IGZ 111.00 CD214L-T110ALF HHE CD214L-T110CALF IHE 122.00 CD214L-T120ALF HHG CD214L-T120CALF IHG 133.00 CD214L-T130ALF HHH CD214L-T130CALF IHH 144.00 CD214L-T150ALF HHM CD214L-T150CALF IHM 167.00 CD214L-T160ALF HHP CD214L-T160CALF IHP 178.00 CD214L-T170ALF HHR CD214L-T170CALF IHR 189.00 Notes: 1. Suffix ‘A’ denotes a 5 % tolerance device. 2. Suffix ‘CA’ denotes a 5 % tolerance bidirectional device. Max. @ IT (mA) Working Peak Reverse Voltage Maximum Reverse Leakage @ VRWM Maximum Reverse Voltage @ IRSM Maximum Reverse Surge Current VRWM (Volts) IR (μA) VRSM (Volts) IRSM (Amps) 7.82 10 5 1000 9.2 326.00 8.15 10 6 1000 10.3 291.30 7.98 10 6.5 500 11.2 267.90 8.60 10 7 200 12 250.00 9.21 1 7.5 100 12.9 232.60 9.83 1 8 50 13.6 220.60 10.43 1 8.5 25 14.4 208.40 11.05 1 9 10 15.4 194.80 12.27 1 10 5 17 176.40 13.50 1 11 5 18.2 164.80 14.70 1 12 5 19.9 150.60 15.90 1 13 5 21.5 139.40 17.20 1 14 5 23.2 129.40 18.50 1 15 5 24.4 123.00 19.70 1 16 5 26 115.40 20.90 1 17 5 27.6 106.60 22.10 1 18 5 29.2 102.80 24.50 1 20 5 32.4 92.60 27.00 1 22 5 35.5 84.40 29.50 1 24 5 38.9 77.20 31.90 1 26 5 42.1 71.20 34.40 1 28 5 45.4 66.00 36.80 1 30 5 48.4 62.00 40.60 1 33 5 53.3 56.20 44.20 1 36 5 58.1 51.60 49.10 1 40 5 64.5 46.40 52.80 1 43 5 69.4 43.20 55.30 1 45 5 72.7 41.20 58.90 1 48 5 77.4 38.80 62.70 1 51 5 82.4 36.40 66.30 1 54 5 87.1 34.40 71.20 1 58 5 93.6 32.00 73.70 1 60 5 96.8 31.00 78.60 1 64 5 103 29.20 86.00 1 70 5 113 26.60 92.10 1 75 5 121 24.80 95.80 1 78 5 126 22.80 104.30 1 85 5 137 20.80 110.50 1 90 5 146 20.60 122.70 1 100 5 162 18.60 134.80 1 110 5 177 16.80 147.00 1 120 5 193 15.60 159.20 1 130 5 209 14.40 184.60 1 150 5 243 12.40 196.70 1 160 5 259 11.60 208.90 1 170 5 275 11.00 3. For bidirectional devices with a VR of 10 volts or less, the IR limit is double. 4. For unidirectional devices with a VF max. of 3.5 V at an IF of 35 A, 0.5 Sine Wave of 8.3 ms Pulse Width. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214L Transient Voltage Suppressor Diode Series Product Dimensions Recommended Footprint A A B C B C G Dimension A (Max.) F H D B (Min.) E C (Min.) Dimension A B C D E F G H SMA (DO-214AB) 6.60 - 7.11 (0.260 - 0.280) 5.59 - 6.22 (0.220 - 0.245) 2.92 - 3.18 (0.115 - 0.125) 0.15 - 0.31 (0.006 - 0.012) 7.75 - 8.13 (0.305 - 0.320) 0.05 - 0.20 (0.002 - 0.008) 2.01 - 2.62 (0.080 - 0.103) 0.76 - 1.52 (0.030 - 0.060) DIMENSIONS: SMA (DO-214AB) 4.69 (0.185) 3.07 (0.121) 1.52 (0.060) DIMENSIONS: MM (INCHES) Physical Specifications Case ............................................ Molded plastic per UL Class 94V-0 Polarity.........................Cathode band indicates unidirectional device No cathode band indicates bidirectional device Weight ......................................................0.007 ounces / 0.21 grams MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214L Transient Voltage Suppressor Diode Series Rating & Characteristic Curves Pulse Derating Curve Maximum Non-Repetitive Surge Current Peak Forward Surge Current (Amps) Peak Pulse Derating in Percent of Peak Power or Current 100 75 50 25 10 x 1000 Waveform as Defined by R.E.A. 25 50 75 100 100 Pulse Width 8.3 ms Single Half Sine-Wave 10 0 0 200 125 150 175 1 200 2 5 Pulse Waveform 100 TA = 25 °C Unidirectional IRSM Half value= 2 Capacitance (pF) IP, Peak Pulse Current (%) 50 10000 Peak value (IRSM) 100 20 Typical Junction Capacitance TR=10 µs Pulse width (TP) is defined as that point where the peak current decays to 50 % of IPSM. 50 10 x 1000 waveform as defined by R.E.A. TA=25 °C TP 1000 Bidirectional 100 0 0 0 2.0 1.0 3.0 0 4.0 10 Pulse Rating Curve 1000 Steady State Power Derating Curve 100 10 1.0 8.0 mm Lead Areas 1.0 µs 10 µs 100 µs TP, Pulse Width 1.0 ms 10 ms RM(AV) Steady State Power Dissipation (W) 5.0 TA = 25 °C Non-repetitive Pulse Waveform Shown in Pulse Waveform Graph 0.1 0.1 µs 100 Standoff Voltage (Volts) T, Time (ms) PP, Peak Power (KW) 10 Number of Cycles at 60 Hz Ambient Temperature (°C) 4.0 3.0 2.0 1.0 60 Hz Resistive or Inductive Load 0.0 0 25 50 75 100 125 150 175 200 TL, Lead Temperature (°C) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CD214L Transient Voltage Suppressor Diode Series Packaging Information The product will be dispensed in tape and reel format (see diagram below). P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P A Trailer ....... ....... End C Device ....... ....... ....... ....... Leader W1 ....... ....... 10 pitches (min.) Start 10 pitches (min.) DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A and specifications shown here. Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- SMA (DO-214AB) 7.22 ± 0.10 (0.284 ± 0.004) 8.11 ± 0.10 (0.319 ± 0.004) 2.36 ± 0.10 (0.093 ± 0.004) 1.55 ± 0.05 (0.061 ± 0.002) 330 (12.992) 50.0 MIN. (1.969) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 7.50 ± 0.10 (0.295 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.10 (0.079 ± 0.004) 0.30 ± 0.10 (0.012 ± 0.004) 16.00 ± 0.20 (0.630 ± 0.008) 22.4 MAX. (0.882) 3,000 REV. 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL