CDSC706-0504C

Features Additional Information ■ Lead free as standard Click these links for more information: ■ RoHS compliant* ■ Low capacitance - 1.3 pF ■ ESD protection >25 kV PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY ■ Surge protection CONTACT CDSC706-0504C - Surface Mount TVS Diode Array General Information The CDSC706-0504C device provides ESD, EFT and Surge protection for high speed data ports meeting IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. The Transient Voltage Suppressor array, protecting up to 4 data lines, offers a Working Peak Reverse Voltage of 5 V and Minimum Breakdown Voltage of 6 V. 5 1 The SC70-6L packaged device will mount directly onto the industry standard SC70-6 footprint. Bourns® Chip Diodes conform to JEDEC standards, are easy to handle with standard pick and place equipment and the flat configuration minimizes roll away. 3 4 6 2 Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Peak Pulse Power (tp = 8/20 μs) Storage Temperature Operating Temperature Operating Supply Voltage ESD per IEC61000-4-2 (Air) (I/O Pins) ESD per IEC61000-4-2 (Contact) (I/O Pins) ESD per IEC61000-4-2 (Air) (VCC to GND) ESD per IEC61000-4-2 (Contact) (VCC to GND) DC Voltage at any I/O Pin Symbol IPP TSTG TOPR CDSC706-0504C 6.5 -55 to +150 -55 to +85 6 18 14 VDC Vesd IO Unit A ºC ºC V kV Vesd VCC 30 30 kV VIO (GND-0.5) to (VCC+0.5) V Symbol CDSC706-0504C Unit VRWM 5.0 V IL 5.0 μA ICD 1.0 μA VBR 6.0 V VF 1.0 V VC 9.0 V Vclamp io 12.5 V CIN 1.6 pF CCROSS 0.14 pF ΔCIN 0.07 pF Electrical Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Maximum Reverse Standoff Voltage 1 Maximum Leakage Current 1 @ VRWM Maximum Channel Leakage Current @ VRWM 1 Minimum Reverse Breakdown Voltage @ IBV=1 mA Maximum Forward Voltage 4 @ IF = 15 mA Maximum Clamping Voltage 2 @ 5 A 8/20 μs Typical ESD Clamping Voltage- I/O 2 Maximum Channel Input Capacitance 2 @ VPIN5=5 V, VPIN2=0 V, VIN=2.5 V, f=1 MHz Max. Channel to Channel Input Capacitance 3 @ VPIN5=5 V, VPIN2=0 V, VIN=2.5 V, f=1 MHz Max. Variation of Channel Input Capacitance @ VPIN5=5 V, VPIN2=0 V, VIN=2.5 V, f=1 MHz (I/O Pin to GND) Notes: 1: Pin 5 to Pin 2 (ground) 2: Pin 1, 3, 4 or 6 to Pin 2 (ground) 3: Between any two of pins 1, 3, 4, 6. 4: Pin 2 (ground) to Pin 5 WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications ■ Personal Digital Assistants (PDAs) ■ Notebook and PC computers ■ Memory card protection ■ SIM card port protection ■ Portable electronics CDSC706-0504C - Surface Mount TVS Diode Array Product Dimensions Recommended Footprint This is a molded JEDEC SC70-6L package with lead free 100 % Matte Sn on the lead frame. It weighs approximately 7 mg and has a flammability rating of UL 94V-0. 1.72 (0.068) 0.15 - 0.30 (0.006 - 0.012) 0.65 (0.026) 1.30 (0.051) 6 5 4 2.00 - 2.20 (0.078 - 0.087) 1 2 0.10 (0.004) 0.65 (0.026) 0 - 10 ° 0.50 (0.020) 3 0.08 - 0.25 (0.003 - 0.001) 1.15 - 1.35 (0.045 - 0.055) 1.30 (0.512) 0.60 (0.024) 0.26 - 0.46 (0.010 - 0.018) 1.90 - 2.15 (0.074 - 0.084) 0.80 - 1.00 (0.031 - 0.040) DIMENSIONS = MILLIMETERS (INCHES) 0.80 - 1.10 (0.031 - 0.043) DIMENSIONS = MILLIMETERS (INCHES) Typical Part Marking CDSC706-0504C..........................................................................C05 How to Order Configuration I/O 4 VDD I/O 3 6 5 4 CD SC706 - 05 04 C Common Code Chip Diode Package SC706 = SC70-6L Package Working Peak Reverse Voltage 05 = 5 VRWM (Volts) Number of Lines 04 = 4 Data Lines Suffix C = Low Capacitance 1 2 3 I/O 1 GND 1/O 2 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSC706-0504C - Surface Mount TVS Diode Array Rating & Characteristic Curves 12 11 10 9 8 7 6 5 4 3 2 1 0 Waveform Parameters: tr = 8 µs td = 20 µs I/O pin to GND pin 4.5 5.0 5.5 Pulse Waveform IPP – Peak Pulse Current (% of IPP) Clamping Voltage - Volts Clamping Voltage vs. Peak Pulse Current 6.0 6.5 7.0 120 Test Waveform Parameters tt = 8 µs td = 20 µs tt 100 80 et 60 40 td = t|IPP/2 20 0 7.5 0 10 5 Peak Pulse Current (Amps) Overshoot and Clamping Voltage 15 0.2 2 % of Rated Power or IPP 5 Volts per Division 25 -5 -72.000 ns 25 30 28.000 ns 128.000 ns 110 100 90 80 70 60 50 40 30 20 10 0 0 25 50 ESD Test Pulse: 25 kilovolt, 1/30 ns (waveshape) 75 100 125 150 Ambient Temperature, TA (°C) Forward Voltage vs. Forward Current Typical Variation of Cin vs. Vin 4.0 2.0 1.8 3.5 3.0 Input Capacitance (pF) Forward Voltage - Volts 20 Power Derating Curve 30 5 15 t – Time (µs) 2.5 2.0 1.5 1.0 Waveform Parameters: tr = 8 µs td = 20 µs I/O pin to GND pin 0.5 0.0 4.5 5.0 5.5 6.0 6.5 Peak Pulse Current (Amps) 7.0 7.5 1.6 1.4 1.2 1.0 0.8 0.6 VDD = 5 V, GND = 0 V, f = 1 MHz, T = 25 °C 0.4 0.2 0.0 0 1 2 3 4 6 Input Voltage (V) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSC706-0504C - Surface Mount TVS Diode Array Packaging Information The product is packaged in tape and reel format per EIA-481 Standard. P 0 P 1 d PART ORIENTATION T E Index Hole 120 ° F D2 W B PIN 1 D1 D P A Trailer ....... ....... End C Device ....... ....... 10 pitches (min.) ....... ....... Leader ....... ....... 10 pitches (min.) W1 Start DIMENSIONS: MM (INCHES) Direction of Feed Item Symbol SC70-6L Carrier Width A 2.25 ± 0.10 (0.088 ± 0.004) Carrier Length B 2.34 ± 0.10 (0.092 ± 0.004) Carrier Depth C 1.22 ± 0.10 (0.048 ± 0.004) Sprocket Hole d 1.55 ± 0.05 (0.061 ± 0.002) Reel Outside Diameter D 178 (7.008) Reel Inner Diameter D1 50.0 MIN. (1.969) Feed Hole Diameter D2 13.0 ± 0.20 (0.512 ± 0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 3.50 ± 0.05 (0.138 ± 0.002) Punch Hole Pitch P 4.00 ± 0.10 (0.157 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness T 0.20 ± 0.10 (0.008 ± 0.004) Tape Width W 8.00 ± 0.20 (0.315 ± 0.008) Reel Width W1 Quantity per Reel -- 14.4 MAX. (0.567) 3000 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 08/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL