CDSOD323-T05LC

Features Applications ■ Lead free as standard** ■ HDMI 1.4 ■ ESD protection 30 kV max. ■ Digital Visual Interface (DVI) ■ Low capacitance ~ 1.0 pF ■ USB 3.0 / USB OTG ■ Protects 1 line ■ Memory protection ■ Uni/bidirectional configuration ■ SIM card ports CDSOD323-TxxLC - TVS Diode Series General Information Additional Information Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly smaller electronic components. UNIDIRECTIONAL 1 Click these links for more information: BIDIRECTIONAL 1 PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications in SOD323 package size format. The Transient Voltage Suppressor Diode series offers a choice of voltage types ranging from 5 V to 24 V in a unidirectional or bidirectional configuration. 2 CONTACT 2 ® Bourns Chip Diodes conform to JEDEC standards, are easy to handle on standard pick and place equipment and their flat configuration minimizes roll away. The Bourns® device will assist compliance with IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. Note: For 12 V and 24 V VDSL applications, the CDSOD323-TxxC-DSL family of devices is recommended. Electrical & Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Peak Pulse Power (tp = 8/20 μs) Operating Temperature Storage Temperature ESD Protection (per IEC 61000-4-2) Contact - Min. Contact - Max. Air - Min. Air - Max. Parameter Min. Breakdown Voltage @ 1 mA Working Peak Voltage Maximum Clamping Voltage @ IP = 1 A Typical Clamping Voltage @ 8/20 μs @ IPP Maximum Leakage Current @ VWM Typical Capacitance @ 0 V, 1 MHz Symbol PPP TL TSTG Value 350 -55 to +150 -55 to +150 ESD ±8 ±30 ±15 ±30 Symbol VBR VM VC VC ID CP UniT05L 6.0 5.0 9.8 18.3 V @ 15 A 5 BiT05LC 6.0 5.0 9.8 18.3 V @ 15 A 5 CDSOD323UniBiT08L T08LC 8.5 8.5 8.0 8.0 13.4 13.4 18.3 V @ 18.3 V 15 A @ 15 A 2 2 1.0 Unit W ºC ºC kV UniT12L 13.3 12.0 19.0 28.6 V @ 11 A 1 BiT12LC 13.3 12.0 19.0 28.6 V @ 11 A 1 Unit V V V V μA pF Notes: 1. Part numbers with suffix “C” indicate bidirectional device, i.e. CDSOD323-T05LC. 2. For bidirectional devices only, the electrical specifications apply in both directions. 3. Unidirectional only: Positive potential is applied from pin 1 to 2. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **No lead detected in standard tests of homogeneous materials. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-TxxLC - TVS Diode Series Electrical & Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) CDSOD323Symbol UniT15L BiT15LC UniT18L BiT18LC UniT24L BiT24LC Unit Min. Breakdown Voltage @ 1 mA VBR 16.7 16.7 20.0 20.0 26.7 26.7 V Working Peak Voltage VM 15.0 15.0 18.0 18.0 24.0 24.0 V Maximum Clamping Voltage @ IP = 1 A VC 24.0 24.0 29.0 29.0 43.0 43.0 V Typical Clamping Voltage @ 8/20 μs @ IPP VC 31.8 V @ 10 A 31.8 V @ 10 A 45.0 V @8A 45.0 V @8A 56.0 V @6A 56.0 V @6A V Parameter Maximum Leakage Current @ VWM ID 1 μA Typical Capacitance @ 0 V, 1 MHz CJ 1.0 pF Notes: 1. Part numbers with suffix “C” indicate bidirectional device, i.e. CDSOD323-T05LC. 2. For bidirectional devices only, the electrical specifications apply in both directions. 3. Unidirectional only: Positive potential is applied from pin 1 to 2. Performance Graphs Peak Pulse Power vs. Pulse Time Pulse Waveform 120 1,000 350 W, 8/20 µs Waveform 100 10 0.1 1 10 100 1,000 10,000 IPP – Peak Pulse Current (% of IPP) PPP – Peak Pulse Current (W) 10,000 80 et 60 40 td = t|IPP/2 20 0 0 5 10 15 20 25 30 t – Time (µs) td – Pulse Duration (µs) Block Diagram Test Waveform Parameters tt = 8 µs td = 20 µs tt 100 How to Order UNIDIRECTIONAL 1 BIDIRECTIONAL 1 CD SOD323 - T 05 LC Common Code Chip Diode Package • SOD323 = SOD-323 Package Model T = Transient Voltage Suppressor Working Peak Reverse Voltage 05 = 5 VRWM (Volts) 2 2 Suffix L = Ultralow Capacitance Unidirectional Diode LC = Ultralow Capacitance Bidirectional Diode Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-TxxLC - TVS Diode Series Product Dimensions Recommended Footprint This is a molded JEDEC SOD-323 package with lead free 100 % Sn plating on the terminations. It weighs approximately 30 mg and has a flammability rating of UL 94V-0. W C CATHODE BAND (FOR UNIDIRECTIONAL PRODUCTS ONLY) L A S L E Dimensions (Nominal) B F D J Dimensions A 1.60 - 1.90 (0.063 - 0.075) B 1.15 - 1.45 (0.045 - 0.057) C 2.39 - 2.70 (0.094 - 0.106) D 0.92 - 1.14 (0.036 - 0.045) E 0.25 - 0.40 (0.010 - 0.016) F 0.08 - 0.20 (0.003 - 0.008) H 0.13 (0.005) MAX. ......... J 0.30 - 0.45 (0.012 - 0.018) H L 0.80 (0.031) S 1.40 (0.055) W 0.50 (0.020) DIMENSIONS: MM (INCHES) Typical Part Marking Each device has device marking outlined below and the unidirectional devices have an additional Polarity Band indicating the cathode. CDSOD323-T05L ........................................................................... T5 CDSOD323-T05LC.........................................................................S5 CDSOD323-T08L ........................................................................... T8 CDSOD323-T08LC.........................................................................S8 CDSOD323-T12L ......................................................................... T12 CDSOD323-T12LC.......................................................................S12 CDSOD323-T15L ....................................................................... T15 CDSOD323-T15LC.......................................................................S15 CDSOD323-T18L ......................................................................... T18 CDSOD323-T18LC.......................................................................S18 CDSOD323-T24L ......................................................................... T24 CDSOD323-T24LC.......................................................................S24 Environmental Specifications DIMENSIONS: MM (INCHES) Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)...............................................................3B Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-TxxLC - TVS Diode Series Packaging Information The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Product Orientation C Device ....... ....... 10 pitches (min.) ....... ....... Leader ....... ....... 10 pitches (min.) Direction of Feed Item Symbol SOD323 Carrier Width A 1.55 ± 0.10 (0.061 ± 0.004) Carrier Length B 2.90 ± 0.10 (0.114 ± 0.004) Carrier Depth C 1.35 ± 0.10 (0.053 ± 0.004) Sprocket Hole d 1.55 ± 0.05 (0.061 ± 0.002) Reel Outside Diameter D 178 (7.008) Reel Inner Diameter D1 80.0 ... Min. (3.150) Feed Hole Diameter D2 13.0 ± 0.20 (0.512 ± 0.008) Sprocket Hole Position E 1.75 ± 0.10 (0.069 ± 0.004) Punch Hole Position F 3.50 ± 0.05 (0.138 ± 0.002) Punch Hole Pitch P 4.00 ± 0.10 (0.157 ± 0.004) Sprocket Hole Pitch P0 4.00 ± 0.10 (0.157 ± 0.004) Embossment Center P1 2.00 ± 0.05 (0.079 ± 0.002) Overall Tape Thickness T 0.20 ± 0.10 (0.008 ± 0.004) Tape Width W 8.00 ± 0.20 (0.315 ± 0.008) Reel Width W1 . 13.5 Max. (0.531) -- 3,000 Quantity per Reel W1 Start DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A. Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 12/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL