CDSOD323-T05S-Q

AN T C- *R Q1 oH 01 S a CO nd M PL I AE ** Features Applications ESD protection 30 kV max. Surge protection >24 A Protects 1 line Unidirectional configuration ■ RoHS compliant* ■ AEC-Q101 compliant** ■ ■ ■ ■ ■ ■ ■ ■ Protection of power buses Protection of I/O interfaces Overvoltage transient protection Telecom, computer, industrial and consumer electronics applications CDSOD323-T05S-Q - TVS Diode Series General Information Additional Information 1 Portable communications, computing and video equipment manufacturers are challenging the semiconductor industry to develop increasingly smaller electronic components. Click these links for more information: Bourns offers Transient Voltage Suppressor Diodes for surge and ESD protection applications in SOD323 package size format. PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Bourns® Chip Diodes conform to JEDEC standards, are easy to handle on standard pick and place equipment and their flat configuration 2 minimizes roll away. The Bourns® device will assist in meeting IEC 61000-4-2 (ESD), IEC 61000-4-4 (EFT) and IEC 61000-4-5 (Surge) requirements. Electrical & Thermal Characteristics (@ TA = 25 °C Unless Otherwise Noted) Parameter Symbol Value Unit PPP 500 W Ambient Temperature TA -55 to +150 ºC Storage Temperature TSTG -55 to +150 ºC ESD ±30 ±30 kV Unidirectional Peak Pulse Power (tp = 8/20 μs) ESD Protection (per IEC 61000-4-2) Contact - Max. Air - Max. Parameter Symbol Value Unit Working Peak Voltage VWM 5.0 V Min. Breakdown Voltage @ 1 mA VBR 6.0 V Maximum Clamping Voltage @ IP = 1 A VC 9.8 V Typical Clamping Voltage @ 8/20 μs @ IPP VC 13.5 V @ 42 A V Maximum Leakage Current @ VWM ID 10 μA Typical Capacitance @ 0 V, 1 MHz CP 350 pF Typical Part Marking Each device has device marking outlined below. Unidirectional devices have an additional Polarity Band indicating the cathode. CDSOD323-T05S-Q .........................................................................B Environmental Specifications Moisture Sensitivity Level ................................................................. 1 ESD Classification (HBM)............................................................... 3A How to Order CD SOD323 - T 05 S - Q Common Code Chip Diode Package • SOD323 = SOD-323 Package Model T = Transient Voltage Suppressor Working Peak Reverse Voltage 05 = 5 VRWM (Volts) Suffix S = Standard Capacitance Unidirectional Diode WARNING Cancer and Reproductive Harm AEC-Q101 Suffix Q = AEC-Q101 Compliant www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** ”Q” part number suffix indicates AEC-Q101 compliance. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-T05S-Q - TVS Diode Series Performance Graph - Pulse Waveform Block Diagram IPP – Peak Pulse Current (% of IPP) 120 100 1 Test Waveform Parameters tt = 8 µs td = 20 µs tt 80 et 60 40 td = t|IPP/2 20 2 0 0 5 10 15 20 25 30 Recommended Footprint t – Time (µs) W Product Dimensions This is a molded JEDEC SOD-323 package with lead free 100 % Sn plating on the terminations. It weighs approximately 30 mg and has a flammability rating of UL 94V-0. L S L C CATHODE BAND (FOR UNIDIRECTIONAL PRODUCTS ONLY) Dimensions (Nominal) A E L 0.80 (0.031) S 1.40 (0.055) W 0.50 (0.020) B F D DIMENSIONS: J A B C D E F H J H MM (INCHES) Dimensions 1.60 - 1.90 (0.063 - 0.075) 1.15 - 1.45 (0.045 - 0.057) 2.39 - 2.70 (0.094 - 0.106) 0.92 - 1.14 (0.036 - 0.045) 0.25 - 0.40 (0.010 - 0.016) 0.08 - 0.20 (0.003 - 0.008) 0.13 ......... (0.005) MAX. 0.30 - 0.45 (0.012 - 0.018) DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CDSOD323-T05S-Q - TVS Diode Series Packaging Information The surface mount product is packaged in an 8 mm x 4 mm tape and reel format per EIA-481 standard. P 0 P 1 d T E Index Hole 120 ° F D2 W B D1 D P Trailer ....... ....... End A Product Orientation C Device ....... ....... 10 pitches (min.) ....... ....... Leader ....... ....... 10 pitches (min.) Direction of Feed Item Symbol Carrier Width A Carrier Length B Carrier Depth C Sprocket Hole d Reel Outside Diameter D Reel Inner Diameter D1 Feed Hole Diameter D2 Sprocket Hole Position E Punch Hole Position F Punch Hole Pitch P Sprocket Hole Pitch P0 Embossment Center P1 Overall Tape Thickness T Tape Width W Reel Width W1 Quantity per Reel -- W1 Start DIMENSIONS: MM (INCHES) Devices are packed in accordance with EIA standard RS-481-A. SOD-323 1.55 ± 0.10 (0.061 ± 0.004) 2.90 ± 0.10 (0.114 ± 0.004) 1.35 ± 0.10 (0.053 ± 0.004) 1.55 ± 0.05 (0.061 ± 0.002) 178 (7.008) 80.0 ... Min. (3.150) 13.0 ± 0.20 (0.512 ± 0.008) 1.75 ± 0.10 (0.069 ± 0.004) 3.50 ± 0.05 (0.138 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 2.00 ± 0.05 (0.079 ± 0.002) 0.20 ± 0.10 (0.008 ± 0.004) 8.00 ± 0.20 (0.315 ± 0.008) . 13.5 Max. (0.531) 3,000 Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com 09/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL