CG0402MLU-05G

HDMI 1.4 - ESD & Overcurrent Protection Solution Products Objective HDMI 1.4 is a hot-pluggable interface combining video, audio & Ethernet signals. Voltages are 5 V or lower and the bandwidth is 340 MHz. This solution privides HDMI 1.4 ports with protection against ESD and short circuits without impairing the transmission of power or data HDMI® Port Compliance IEC 61000-4-2 Level 4 (8 kV / 15 kV) Alternate Recommendations CG0402MLU-05G Solution MF-FSMF020X-2 Other PortNote® Solutions: • HDMI: HDMI 1.3 - ESD & Overcurrent Protection Other ChipGuard® Protectors: CG0603MLU-05E, CG0402MLC-05LGA CG0603MLC-05LEA 9 ChipGuard® ESD Suppressors: CG0402MLU-05G 1 Multifuse® PTC Resettable Fuse: MF-FSMF020X-2 MF-FSMF020X-2 Benefit This solution provides IEC 61000 Level 4 ESD protection without impairing the HDMI signal. VCC +5V TMDS_D2+ TMDS_D2TMDS_D1+ TMDS_D1TMDS GND HDMI Connector TMDS_D0+ TMDS_D0TMDS_DCLK+ TMDS_DCLKTMDS GND CG0402MLU-05G HDMI ASIC Design Kit CG0402MLU-05G HEC+ HECCG0402MLU-05G Half-duplex Ethernet PN-DESIGNKIT-12 The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. Americas: Europe: Tel +41-(0)41 768 55 55 Fax +41-(0)41 768 55 10 Tel +1-951 781-5500 Fax +1-951 781-5700 Tel +886-2 256 241 17 Fax +886-2 256 241 16 Bourns® PortNote® solutions provide protection recommendations for typical port threats. For more information, go to: Asia-Pacific: COPYRIGHT© 2011 • BOURNS, INC. • 9/11 • e/CPK1137 • “PortNote” is a registered service mark of Bourns, Inc. “Bourns”, “Multifuse” and “ChipGuard” are registered trademarks of Bourns, Inc. in the U.S. and other countries. “HDMI” is a registered mark of its owner. www.bourns.com or email: protection@bourns.com