CG0603MLC-05LE

USB 2.0 - ESD & Overcurrent Protection Solution Products Objective Universal Serial Bus (USB) 2.0 ports provide up to 480 Mbps data transfer rates and 5 V power at up to 500 mA. As a hot-pluggable interface, it typically requires protection against ESD and short circuits. This solution provides this protection. USB Compliance USB 2.0 UL60950 IEC 61000-4-2 Level 4 (8 kV / 15 kV) MF-NSMF075-2 Alternate Recommendations Benefit Solution CG0603MLC-05LE Other PortNote® Solutions: • USB: USB 3.0 - ESD & Overcurrent Protection 1 Multifuse® PPTC: MF-NSMF075-2 3 ChipGuard® ESD Suppressors: CG0603MLC-05LE This solution provides USB 2.0 ports with compatible protection without impairing the transmission of power or data. Vbus D+ DUSB Port GND CG0603MLC-05LE MF-NSMF075-2 USB Controller Design Kit The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. PN-DESIGNKIT-3 Americas: Europe: Tel +41-(0)41 768 55 55 Fax +41-(0)41 768 55 10 Tel +1-951 781-5500 Fax +1-951 781-5700 Tel +886-2 256 241 17 Fax +886-2 256 241 16 Bourns® PortNote® solutions provide protection recommendations for typical port threats. For more information, go to: Asia-Pacific: www.bourns.com COPYRIGHT© 2011 • BOURNS, INC. • 8/11 • e/CPK1138 • “PortNote” is a registered service mark of Bourns, Inc. “Bourns”, “Multifuse” and “ChipGuard” are registered trademarks of Bourns, Inc. in the U.S. and other countries. or email: protection@bourns.com