CG1206MLC-12E

Features Applications ■ RoHS compliant* ■ HDMI 1.4 ■ ESD protection >25 kV ■ Digital Visual Interface (DVI) ■ Low capacitance 100 Reps) Unit 150 V 1 ns ±8 ±15 kV kV Operating Temperature TOPR -40 to +85 ˚C Storage Temperature TSTG -40 to +85 ˚C Note 1: Per IEC 61000-4-2, 30 A @ 8 kV, level 4, clamp measurement made 30 ns after initiation of pulse, all tests in contact discharge mode. WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. ChipGuard® CG1206MLC Series - ESD Protector Array Product Dimensions Recommended Pad Layout E H D A W B D C DIMENSIONS: L B C MM (INCHES) Dimension CG1206 Series Dimension CG1206 Series B 0.40 ± 0.20 (0.016 ± 0.008) A 0.60 (0.024) C 0.40 ± 0.20 (0.016 ± 0.008) B 1.60 (0.063) D 0.20 ± 0.10 (0.008 ± 0.004) C 2.20 (0.087) H 0.50 ± 0.10 (0.019 ± 0.004) D 0.50 (0.020) L 3.20 ± 0.20 (0.127 ± 0.008) E 0.80 (0.03) W 1.60 ± 0.20 (0.065 ± 0.008) Solder Reflow Recommendations Temperature (ϒC) 300 Preheat Stages 1-3 Soldering Cooling Stage 1 Preheat Ambient to Preheating Temperature 30 s to 60 s B Stage 2 Preheat 140 °C to 160 °C 60 s to 120 s C Stage 3 Preheat Preheat to 200 °C 20 s to 40 s D Main Heating 200 °C 210 °C 220 °C 230 °C 240 °C 60 s to 70 s 55 s to 65 s 50 s to 60 s 40 s to 50 s 30 s to 40 s E Cooling 200 °C to 100 °C 1 °C/s to 4 °C/s 250 A 200 150 100 50 0 110 sec. (min.) 30-70 sec. 120 sec. (min.) Time (seconds) • • • • This product can be damaged by rapid heating, cooling or localized heating. Heat shocks should be avoided. Preheating and gradual cooling recommended. Excessive solder can damage the device. Print solder thickness of 150 to 200 um recommended. Solder gun tip temperature should be kept below 280 °C and should not touch the device directly. Contact should be less than 3 seconds. A solder gun under 30 watts is recommended. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. ChipGuard® CG1206MLC Series - ESD Protector Array Packaging Dimensions 8.00 ± 0.30 (0.32 ± 0.012) 4.00 ± 0.10 (0.16 ± 0.004) 13.0 ± 1.0 (0.52 ± 0.04) C 1.50 ± 0.10 (0.06 ± 0.004) 62.0 ± 1.50 (2.48 ± 0.06) 2.0 ± 0.50 (0.08 ± 0.02) L 13.0 ± 0.50 (0.52 ± 0.02) TOP TAPE G D 3.50 ± 0.05 (0.14 ± 0.002) W 21.0 ± 0.80 (0.84 ± 0.032) 180.8 ± 2.0 (7.12 ± 0.08) NOTES: TAPE MATERIAL IS PAPER. 0.48 ± 0.03 TAPE THICKNESS IS (0.019 ± 0.0012) COVER TAPE ADHESION IS 40 ± 15 GRAMS. DIMENSIONS: Dimension CG1206 Series C 1.75 ± 0.10 (0.069 ± 0.004) D 2.00 ± 0.05 (0.080 ± 0.002) L 3.50 ± 0.20 (0.138 ± 0.008) W 1.90 ± 0.20 (0.075 ± 0.008) G 4.00 ± 0.10 (0.16 ± 0.004) MM (INCHES) 9.0 ± 0.50 (0.36 ± 0.02) How to Order CG 1206 - MLC 12 E ® ChipGuard Product Designator Package Option 1206 = 1206 Package Model Series MLC = Low Capacitance Working Peak Voltage 12 = 12 V Tape & Reel Packaging E = 5,000 pcs. per reel Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. D 08/19 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL