CHV0603-FX-9103ELF

Features Applications ■ Thick film ■ High voltage applications ■ High voltage ■ Consumer electronics ■ Wide resistance range 1504 ■ RoHS compliant* ■ UL/IEC 60950 & 60065 compatible ■ UL 1676 recognized CHV Series - Thick Film High Voltage Chip Resistors Electrical Characteristics Specification CHV0603 CHV0805 Power Rating @ 70 °C Operating Temperature Range Maximum Working Voltage 0.1 W 0.125 W 200 V Maximum Overload Voltage 400 V 1% E-96 + E-24 5% E-24 1% 5% Resistance Range Temperature Coefficient Model CHV1206 CHV2010 CHV2512 0.5 W 1.0 W 400 V 0.25 W -55 °C to +155 °C 800 V 2000 V 3000 V 800 V 1600 V 3000 V 4000 V 100 kΩ ∼ 10 MΩ 100 kΩ ∼ 22 MΩ 100 kΩ ∼ 100 MΩ ±100 PPM/°C ±200 PPM/°C Environmental Characteristics Additional Information Test Conditions Specification Short Time Overload 5 times rated power or max overload voltage for 5 seconds Δ R ≤ ± (2 % + 0.1 Ω) Solderability +245 ±5 ℃ for 3 ± 0.5 seconds Over 95 % coverage Resistance to Solder Heat +260 ±5 ℃ for 10 ±1 seconds Δ R ≤ ± (1 % + 0.1 Ω) Load Life Humidity +40 ±2 ℃, 90~95 % 1.5 hours ON, 0.5 hours OFF for 1000 hours at rated power Δ R ≤ ± (5 % + 0.1 Ω) Load Life +70℃ 1.5 hours ON, 0.5 hours OFF for 1000 hours at rated power Δ R ≤ ± (5 % + 0.1 Ω) Temperature Cycle -55 ℃ (30 minutes), +25 ℃ (2~3 minutes), +155 ℃ (30 minutes), +25 ℃ (2~3 minutes) for five cycles Δ R ≤ ± (5 % + 0.05 Ω) Voltage Coefficient of Resistance (VCR) Max. Test Voltage: 500 V VL: 10 % RCWV or Max. RCWV VH: 100 % RCWV or Max. RCWV R ≤ 1 MΩ: ±100 ppm/V 1 MΩ < R < 10 MΩ: ±200 ppm/V R ≥ 10 MΩ: ±300 ppm/V Click these links for more information: PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT Agency Recognition UL1676 Description File Number: E466353 How to Order CHV 2512 - F X - 1000 E LF WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns® products have not been specifically designed and tested for FDA Class III applications and their use in such applications is neither recommended nor supported. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Model (CHV = Thick Film High Voltage Chip Resistor Size • 0603 • 0805 • 1206 • 2010 • 2512 Resistance Tolerance F = ±1 % (Use with “X” TCR Code) J = ±5 % (Use with “W” TCR Code) TCR X = ±100 PPM/°C W = ±200 PPM/°C Resistance Value 1 % Tolerance: First three digits are significant, fourth digit represents the number of zeroes to follow 5 % Tolerance: First two digits are significant, third digit represents the number of zeroes to follow Packaging E = Paper tape: • 5,000 pcs. on 7 ˝ plastic reel (CHV0603, CHV0805, CHV1206) • 4,000 pcs. on 7 ˝ plastic reel (CHV2010, CHV2512) Termination LF = Tin-plated (RoHS compliant) CHV Series - Thick Film High Voltage Chip Resistors Soldering Profile Construction 300 OVERCOAT 250 INNER ELECTRODE Peak 245 °C Sn PLATING 190 °C RESISTIVE ELEMENT 10~15 seconds 150 Ni PLATING CERAMIC SUBSTRATE 60~120 seconds Derating Curve 100 50 0 0 10 50 100 150 200 250 Time (seconds) Rated power in percentage (%) Temperature (°C) 200 100 80 60 40 20 0 -55 0 155 70 Ambient temperature (°C) Product Dimensions A Model Dim. CHV0603 CHV0805 CHV1206 CHV2010 CHV2512 A 1.60 ± 0.10 2.00 ± 0.10 3.10 ± 0.10 5.00 ± 0.20 6.40 ± 0.20 (0.063 ± 0.004) (0.079 ± 0.004) (0.122 ± 0.004) (0.197 ± 0.008) (0.252 ± 0.008) B 0.80 ± 0.10 1.25 ± 0.10 1.60 ± 0.10 2.50 ± 0.20 3.20 ± 0.20 (0.031 ± 0.004) (0.049 ± 0.004) (0.063 ± 0.004) (0.098 ± 0.008) (0.126 ± 0.008) C 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.65 ± 0.25 0.65 ± 0.25 (0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.026 ± 0.010) (0.026 ± 0.010) D 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.60 ± 0.25 0.90 ± 0.25 (0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.024 ± 0.010) (0.035 ± 0.010) T 0.45 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 0.60 ± 0.10 0.60 ± 0.15 (0.018 ± 0.004) (0.020 ± 0.004) (0.022 ± 0.004) (0.024 ± 0.004) (0.024 ± 0.006) 100 C B C T D D DIMENSIONS: MM (INCHES) Recommended Land Pattern Model Dim. L CHV0603 CHV0805 CHV1206 CHV2010 CHV2512 A 0.90 (0.035) 1.30 (0.051) 1.80 (0.071) 3.00 (0.118) 3.70 (0.146) B 1.00 (0.039) 1.15 (0.045) 1.30 (0.051) 1.50 (0.059) 1.60 (0.063) L 3.00 (0.118) 3.50 (0.138) 4.70 (0.185) 6.80 (0.268) 7.60 (0.299) A B DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CHV Series - Thick Film High Voltage Chip Resistors Resistor Markings Marking Explanation CHV0603 CHV0805 CHV1206 CHV2010 CHV2512 CHV0805 CHV1206 CHV2010 CHV2512 301 1542 3-Digit E-24 ±5 % Marking 4-Digit E-96/E-24 Marking 30 X 101 Value = 300 ohms 154 X 102 Value = 15.4K ohms • The chip color is red to identify high voltage product. CHV0603 222 CHV0603 01C 3-Digit 3-Digit E-24 ±1 % Marking E-96 ±1 % Marking 222 X 102 Value = 2.2K ohms • 1 % Tolerance: 4 digits, first three digits are significant, fourth digit represents the number of zeros to follow. • 5 % Tolerance: 3 digits, first two digits are significant, third digit represents the number of zeros to follow. 10 X 100 Value = 10 ohms Packaging Dimensions - Tape 1.50 ± 0.10 (0.059 ± 0.004) DIA. 4.00 ± 0.10 (0.157 ± 0.004) T 1.75 ± 0.10 (0.069 ± 0.004) 2.0 ± 0.5 (0.079 ± 0.020) 13.0 ± 0.5 (0.512 ± 0.020) F 4.00 ± 0.10 (0.157 ± 0.004) A 2.00 ± 0.05 (0.079 ± 0.002) W 20.0 (0.787) B USER DIRECTION OF FEED 178.0 ± 2.0 (7.008 ± 0.079) Model Dim. CHV0603 CHV0805 CHV1206 CHV2010 CHV2512 A 1.10 ± 0.20 1.60 ± 0.20 2.00 ± 0.20 2.80 ± 0.20 3.50 ± 0.20 (0.043 ± 0.008) (0.063 ± 0.008) (0.079 ± 0.008) (0.110 ± 0.008) (0.138 ± 0.008) B 1.90 ± 0.30 2.40 ± 0.30 3.57 ± 0.30 5.50 ± 0.30 6.70 ± 0.30 (0.075 ± 0.012) (0.094 ± 0.012) (0.141 ± 0.012) (0.217 ± 0.012) (0.264 ± 0.012) W 8.00 ± 0.05 8.00 ± 0.05 8.00 ± 0.05 12.00 ± 0.05 12.00 ± 0.05 (0.315 ± 0.002) (0.315 ± 0.002) (0.315 ± 0.002) (0.472 ± 0.002) (0.472 ± 0.002) F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 5.50 ± 0.05 5.50 ± 0.05 (0.138 ± 0.002) (0.138 ± 0.002) (0.138 ± 0.002) (0.217 ± 0.002) (0.217 ± 0.002) G 10.0 ± 1.5 10.0 ± 1.5 10.0 ± 1.5 13.8 ± 1.5 13.8 ± 1.5 (0.394 ± 0.059) (0.394 ± 0.059) (0.394 ± 0.059) (0.543 ± 0.059) (0.543 ± 0.059) T 14.9 (0.587) 14.9 (0.587) 14.9 (0.587) 16.7 (0.657) 16.7 (0.657) G 60.0 ± 0.5 (2.362 ± 0.020) DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com REV. 03/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL