CHV0805-FX-2203ELF

Features Applications n High voltage n Consumer electronics n Thick film n High voltage applications n Wide resistance range 1504 n RoHS compliant* n UL/IEC 60950 & 60065 compatible n UL 1676 recognized CHV Series - Thick Film High Voltage Chip Resistors Agency Recognition Additional Information Click these links for more information: UL1676 PRODUCT TECHNICAL LIBRARY INVENTORY SAMPLES Description File Number: E466353 CONTACT Electrical Characteristics Specification CHV0603 CHV0805 Power Rating @ 70 °C Operating Temperature Range Maximum Working Voltage 0.1 W 0.125 W 200 V Maximum Overload Voltage 400 V Resistance Range Temperature Coefficient 1% E-96 + E-24 5% E-24 1% 5% Model CHV1206 Solderability Resistance to Solder Heat Load Life Humidity Load Life Temperature Cycle Voltage Coefficient of Resistance (VCR) Conditions 5 times rated power or max overload voltage for 5 seconds 0.5 W 1.0 W 400 V 2000 V 3000 V 800 V 1600 V 3000 V 4000 V 100 kW ~ 10 MW 100 kW ~ 22 MW How to Order Specification D R ≤ ± (2 % + 0.1 Ω) Over 95 % coverage +260 ±5 ℃ for 10 ±1 seconds D R ≤ ± (1 % + 0.1 Ω) Max. Test Voltage: 500 V VL: 10 % RCWV or Max. RCWV VH: 100 % RCWV or Max. RCWV 100 kW ~ 100 MW ±100 PPM/°C ±200 PPM/°C +245 ±5 ℃ for 3 ± 0.5 seconds +40 ±2 ℃, 90~95 % 1.5 hours ON, 0.5 hours OFF for 1000 hours at rated power +70℃ 1.5 hours ON, 0.5 hours OFF for 1000 hours at rated power -55 ℃ (30 minutes), +25 ℃ (2~3 minutes), +155 ℃ (30 minutes), +25 ℃ (2~3 minutes) for five cycles CHV2512 0.25 W -55 °C to +155 °C 800 V Environmental Characteristics Test Short Time Overload CHV2010 D R ≤ ± (5 % + 0.1 Ω) D R ≤ ± (5 % + 0.1 Ω) D R ≤ ± (5 % + 0.05 Ω) R ≤ 1 MΩ: ±100 ppm/V 1 MΩ < R < 10 MΩ: ±200 ppm/V R ≥ 10 MΩ: ±300 ppm/V WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov CHV 2512 - F X - 1000 E LF Model (CHV = Thick Film High Voltage Chip Resistor Size • 0603 • 2010 • 0805 • 2512 • 1206 Resistance Tolerance F = ±1 % (Use with “X” TCR Code) J = ±5 % (Use with “W” TCR Code) TCR X = ±100 PPM/°C W = ±200 PPM/°C Resistance Value 1 % Tolerance: First three digits are significant, fourth digit represents the number of zeroes to follow 5 % Tolerance: First two digits are significant, third digit represents the number of zeroes to follow Packaging E = Paper tape: • 5,000 pcs. on 7 ” plastic reel (CHV0603, CHV0805, CHV1206) • 4,000 pcs. on 7 ” plastic reel (CHV2010, CHV2512) Termination LF = Tin-plated (RoHS compliant) * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns® products have not been specifically designed and tested for FDA Class III applications and their use in such applications is neither recommended nor supported. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CHV High Voltage Chip Resistors 3312Series - 2 mm- Thick SMD Film Trimming Potentiometer Soldering Profile Construction OVERCOAT 300 250 RESISTIVE ELEMENT 190 °C CERAMIC SUBSTRATE 10~15 seconds 150 50 0 0 10 50 Ni PLATING Derating Curve 60~120 seconds 100 100 150 200 250 Time (seconds) Rated power in percentage (%) Tem perature (°C) Sn PLATING Peak 245 °C 200 INNER ELECTRODE 100 80 60 40 20 0 -55 0 155 70 (°C) Ambient temperature Product Dimensions Dim. Model CHV0603 CHV0805 CHV1206 A CHV2010 CHV2512 A 1.60 ± 0.10 2.00 ± 0.10 3.10 ± 0.10 5.00 ± 0.20 6.40 ± 0.20 (0.063 ± 0.004) (0.079 ± 0.004) (0.122 ± 0.004) (0.197 ± 0.008) (0.252 ± 0.008) B 0.80 ± 0.10 1.25 ± 0.10 1.60 ± 0.10 2.50 ± 0.20 3.20 ± 0.20 (0.031 ± 0.004) (0.049 ± 0.004) (0.063 ± 0.004) (0.098 ± 0.008) (0.126 ± 0.008) C 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.65 ± 0.25 0.65 ± 0.25 (0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.026 ± 0.010) (0.026 ± 0.010) D 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.60 ± 0.25 0.90 ± 0.25 (0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.024 ± 0.010) (0.035 ± 0.010) T 0.45 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 0.60 ± 0.10 0.60 ± 0.15 (0.018 ± 0.004) (0.020 ± 0.004) (0.022 ± 0.004) (0.024 ± 0.004) (0.024 ± 0.006) 100 B A C C T 100 CD B CD T DIMENSIONS: L D MM (INCHES) D Recommended Land Pattern Dim. A Model CHV0603 CHV0805 CHV1206 CHV2010 CHV2512 A 0.90 (0.035) 1.30 (0.051) 1.80 (0.071) 3.00 (0.118) 3.70 (0.146) B 1.00 (0.039) 1.15 (0.045) 1.30 (0.051) 1.50 (0.059) 1.60 (0.063) L 3.00 (0.118) 3.50 (0.138) 4.70 (0.185) 6.80 (0.268) 7.60 (0.299) L B A B DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CHV High Voltage Chip Resistors 3312Series - 2 mm- Thick SMD Film Trimming Potentiometer Resistor Markings Marking Explanation CHV0603 CHV0805 CHV1206 CHV2010 CHV2512 CHV0805 CHV1206 CHV2010 CHV2512 301 1542 • The chip color is red to identify high voltage product. CHV0603 222 CHV0603 01C 3-Digit 4-Digit E-24 ±5 % Marking E-96/E-24 Marking 3-Digit 3-Digit E-24 ±1 % Marking E-96 ±1 % Marking 30 X 101 Value = 300 ohms 222 X 102 Value = 2.2K ohms 154 X 102 Value = 15.4K ohms 10 X 100 Value = 10 ohms • • 1 % Tolerance: 4 digits, first three digits are significant, fourth digit represents the number of zeros to follow. 5 % Tolerance: 3 digits, first two digits are significant, third digit represents the number of zeros to follow. Packaging Dimensions - Tape 1.50 ± 0.10 (0.059 ± 0.004) DIA. 4.00 ± 0.10 (0.157 ± 0.004) T 1.75 ± 0.10 (0.069 ± 0.004) 13.0 ± 0.5 (0.512 ± 0.020) F 4.00 ± 0.10 (0.157 ± 0.004) A 2.00 ± 0.05 (0.079 ± 0.002) 2.0 ± 0.5 (0.079 ± 0.020) W 20.0 (0.787) B USER DIRECTION OF FEED 178.0 ± 2.0 (7.008 ± 0.079) G 60.0 ± 0.5 (2.362 ± 0.020) Model Dim. CHV0603 CHV0805 CHV1206 CHV2010 CHV2512 A 1.10 ± 0.20 1.60 ± 0.20 2.00 ± 0.20 2.80 ± 0.20 3.50 ± 0.20 (0.043 ± 0.008) (0.063 ± 0.008) (0.079 ± 0.008) (0.110 ± 0.008) (0.138 ± 0.008) B 1.90 ± 0.30 2.40 ± 0.30 3.57 ± 0.30 5.50 ± 0.30 6.70 ± 0.30 (0.075 ± 0.012) (0.094 ± 0.012) (0.141 ± 0.012) (0.217 ± 0.012) (0.264 ± 0.012) W 8.00 ± 0.05 8.00 ± 0.05 8.00 ± 0.05 12.00 ± 0.05 12.00 ± 0.05 (0.315 ± 0.002) (0.315 ± 0.002) (0.315 ± 0.002) (0.472 ± 0.002) (0.472 ± 0.002) F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 5.50 ± 0.05 5.50 ± 0.05 (0.138 ± 0.002) (0.138 ± 0.002) (0.138 ± 0.002) (0.217 ± 0.002) (0.217 ± 0.002) G 10.0 ± 1.5 10.0 ± 1.5 10.0 ± 1.5 13.8 ± 1.5 13.8 ± 1.5 (0.394 ± 0.059) (0.394 ± 0.059) (0.394 ± 0.059) (0.543 ± 0.059) (0.543 ± 0.059) T REV. 03/21 14.9 (0.587) 14.9 (0.587) 14.9 (0.587) 16.7 (0.657) 16.7 (0.657) DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com Europe: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R