CHV2010-FX-2203EST

Features Applications ■ Thick film ■ Higher voltage applications ■ High working voltage ■ Consumer electronics ■ Wide resistance range 1504 ■ RoHS compliant* CHV-ST Series – Thick Film High Voltage Chip Resistors Electrical Characteristics Additional Information Click these links for more information: Model Specification CHV 0603 -ST CHV 0805 -ST CHV 1206 -ST CHV 2010 -ST CHV 2512 -ST Power Rating @ 70 °C 0.1 W 0.125 W 0.25 W 0.5 W 1.0 W Operating Temperature Range 200 V 400 V 800 V 2000 V 3000 V Maximum Overload Voltage 400 V 800 V 1600 V 3000 V 4000 V 1% E-96 + E-24 100 kΩ ∼ 10 MΩ 5% E-24 Temperature Coefficient 100 kΩ ∼ 22 MΩ 100 kΩ ∼ 100 MΩ 1% ±100 PPM/°C 5% ±200 PPM/°C Environmental Characteristics Test Short Time Overload Conditions 5 times rated power or max overload voltage for 5 seconds Δ R ≤ ± (2 % + 0.1 Ω) Solderability Resistance to Solder Heat +245 ±5 ℃ for 3 ± 0.5 seconds Over 95 % coverage +260 ±5 ℃ for 10 ±1 seconds Δ R ≤ ± (1 % + 0.1 Ω) Specification +40 ±2 ℃, 90~95 % 1.5 hours ON, 0.5 hours OFF for 1000 hours at rated power +70℃ 1.5 hours ON, 0.5 hours OFF for 1000 hours at rated power -55 ℃ (30 minutes), +25 ℃ (2~3 minutes), +155 ℃ (30 minutes), +25 ℃ (2~3 minutes) for five cycles Load Life Humidity Load Life Temperature Cycle CONTACT -55 °C to +155 °C Maximum Working Voltage Resistance Range PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY Δ R ≤ ± (3 % + 0.1 Ω) Δ R ≤ ± (3 % + 0.1 Ω) Δ R ≤ ± (1 % + 0.1 Ω) How to Order CHV 2512 - F X - 1000 E ST Model (CHV = Thick Film High Voltage Chip Resistor Size • 0603 • 0805 • 1206 • 2010 • 2512 Resistance Tolerance F = ±1 % (Use with “X” TCR Code) J = ±5 % (Use with “W” TCR Code) TCR X = ±100 PPM/°C W = ±200 PPM/°C Resistance Value 1 % Tolerance: First three digits are significant, fourth digit represents the number of zeroes to follow 5 % Tolerance: First two digits are significant, third digit represents the number of zeroes to follow Packaging E = Paper tape: • 5,000 pcs. on 7 ˝ plastic reel (CHV0603-ST, CHV0805-ST, CHV1206-ST) • 4,000 pcs. on 7 ˝ plastic reel (CHV2010-ST, CHV2512-ST) Termination ST = Tin-plated (RoHS compliant) Rated power in percentage (%) Derating Curve 100 80 60 40 20 0 -55 0 70 155 Ambient temperature (°C) WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CHV-ST Series – Thick Film High Voltage Chip Resistors Soldering Profile Construction 300 OVERCOAT 250 Peak 245 °C Temperature (°C) 200 Sn PLATING 190 °C RESISTIVE ELEMENT 10~15 seconds 150 INNER ELECTRODE CERAMIC SUBSTRATE Ni PLATING 60~120 seconds 100 50 0 0 10 50 100 150 200 250 Time (seconds) Product Dimensions Model A Dim. CHV0603-ST CHV0805-ST CHV1206-ST CHV2010-ST CHV2512-ST A 1.60 ± 0.10 2.00 ± 0.10 3.10 ± 0.10 5.00 ± 0.20 6.40 ± 0.20 (0.063 ± 0.004) (0.079 ± 0.004) (0.122 ± 0.004) (0.197 ± 0.008) (0.252 ± 0.008) B 0.80 ± 0.10 1.25 ± 0.10 1.60 ± 0.10 2.50 ± 0.20 3.20 ± 0.20 (0.031 ± 0.004) (0.049 ± 0.004) (0.063 ± 0.004) (0.098 ± 0.008) (0.126 ± 0.008) C 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.65 ± 0.25 0.65 ± 0.25 (0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.026 ± 0.010) (0.026 ± 0.010) D 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.20 0.60 ± 0.25 0.90 ± 0.25 (0.012 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.008) (0.024 ± 0.010) (0.035 ± 0.010) T 0.45 ± 0.10 0.50 ± 0.10 0.55 ± 0.10 0.60 ± 0.10 0.60 ± 0.15 (0.018 ± 0.004) (0.020 ± 0.004) (0.022 ± 0.004) (0.024 ± 0.004) (0.024 ± 0.006) 100 C B C T D D DIMENSIONS: MM (INCHES) Recommended Land Pattern Model L Dim. CHV0603-ST CHV0805-ST CHV1206-ST CHV2010-ST CHV2512-ST A 0.90 (0.035) 1.30 (0.051) 1.80 (0.071) 3.00 (0.118) 3.70 (0.146) B 1.00 (0.039) 1.15 (0.045) 1.30 (0.051) 1.50 (0.059) 1.60 (0.063) L 3.00 (0.118) 3.50 (0.138) 4.70 (0.185) 6.80 (0.268) 7.60 (0.299) A B DIMENSIONS: MM (INCHES) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CHV-ST Series – Thick Film High Voltage Chip Resistors Resistor Markings Marking Explanation CHV0603-ST CHV0805-ST CHV1206-ST CHV2010-ST CHV2512-ST CHV0805-ST CHV1206-ST CHV2010-ST CHV2512-ST 301 1542 3-Digit E-24 ±5 % Marking 4-Digit E-96/E-24 Marking 30 X 101 Value = 300 ohms 154 X 102 Value = 15.4K ohms • The chip color is red to identify high voltage product. CHV0603-ST CHV0603-ST 222 01C 3-Digit 3-Digit E-24 ±1 % Marking E-96 ±1 % Marking 222 X 102 Value = 2.2K ohms • 1 % Tolerance: 4 digits, first three digits are significant, fourth digit represents the number of zeros to follow. • 5 % Tolerance: 3 digits, first two digits are significant, third digit represents the number of zeros to follow. 10 X 100 Value = 10 ohms Packaging Dimensions - Tape 1.50 ± 0.10 (0.059 ± 0.004) DIA. 4.00 ± 0.10 (0.157 ± 0.004) T 1.75 ± 0.10 (0.069 ± 0.004) 2.0 ± 0.5 (0.079 ± 0.020) 13.0 ± 0.5 (0.512 ± 0.020) F 4.00 ± 0.10 (0.157 ± 0.004) A 2.00 ± 0.05 (0.079 ± 0.002) W B 20.0 (0.787) USER DIRECTION OF FEED 178.0 ± 2.0 (7.008 ± 0.079) G 60.0 ± 0.5 (2.362 ± 0.020) Model Dim. CHV0603-ST CHV0805-ST CHV1206-ST CHV2010-ST CHV2512-ST A 1.10 ± 0.20 1.60 ± 0.20 2.00 ± 0.20 2.80 ± 0.20 3.50 ± 0.20 (0.043 ± 0.008) (0.063 ± 0.008) (0.079 ± 0.008) (0.110 ± 0.008) (0.138 ± 0.008) B 1.90 ± 0.30 2.40 ± 0.30 3.57 ± 0.30 5.50 ± 0.30 6.70 ± 0.30 (0.075 ± 0.012) (0.094 ± 0.012) (0.141 ± 0.012) (0.217 ± 0.012) (0.264 ± 0.012) W 8.00 ± 0.05 8.00 ± 0.05 8.00 ± 0.05 12.00 ± 0.05 12.00 ± 0.05 (0.315 ± 0.002) (0.315 ± 0.002) (0.315 ± 0.002) (0.472 ± 0.002) (0.472 ± 0.002) F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 5.50 ± 0.05 5.50 ± 0.05 (0.138 ± 0.002) (0.138 ± 0.002) (0.138 ± 0.002) (0.217 ± 0.002) (0.217 ± 0.002) G 10.0 ± 1.5 10.0 ± 1.5 10.0 ± 1.5 13.8 ± 1.5 13.8 ± 1.5 (0.394 ± 0.059) (0.394 ± 0.059) (0.394 ± 0.059) (0.543 ± 0.059) (0.543 ± 0.059) T 14.9 (0.587) 14.9 (0.587) 14.9 (0.587) 16.7 (0.657) 16.7 (0.657) DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 Email: americus@bourns.com www.bourns.com 05/21 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL