CMP0603AFX-1002ELF

*R AE **H oHS C- AL C Q2 OG OM 00 EN P CO FR LIA M EE NT PL & , IA NT Features Applications n Power rating up to 1.5 watts @ 70 °C n Digital meters n High power surge withstanding n Consumer electronics n RoHS compliant* n LED lighting n Halogen free** n Industry control boards n Thick film technology 01B n Power supplies n AEC-Q200 compliant CMP-A Series High Power Anti-Surge Chip Resistors Additional Information Click these links for more information: PRODUCT TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT Electrical Characteristics Model Characteristic Power Rating @ 70 °C CMP0603A CMP0805A 0.25 W 0.5 W Operating Temperature Range CMP1206A CMP2010A CMP2512A 0.75 W 1W 1.5 W 250 V 200 V 300 V 500 V 400 V 600 V -55 °C to +155 °C Derated to Zero Load at +155 °C Maximum Working Voltage 75 V 200 V Maximum Overload Voltage 125 V 300 V Resistance Tolerance ±1 %, ±5 % Temperature Coefficient 10 Ω to 1 MΩ (±1 %, E24 & E96 Series) ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C 10 Ω to 1 MΩ (±5 %, E24 Series ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C Note: Solder pad and trace size should be evaluated and board surface temperature should not exceed +105 °C when applying full rated power. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP-A Series High Power Anti-Surge Chip Resistors Product Dimensions Model L W C D T CMP0603A 1.60 ± 0.10 (.063 ± .004) 0.80 ± 0.10 (.031 ± .004) 0.30 ± 0.20 (.012 ± .008) 0.30 ± 0.20 (.012 ± .008) 0.45 ± 0.10 (.018 ± .004) CMP0805A 2.00 ± 0.10 (.079 ± .004) 1.25 ± 0.10 (.049 ± .004) 0.40 ± 0.20 (.016 ± .008) 0.40 ± 0.20 (.016 ± .008) 0.50 ± 0.10 (.020 ± .004) CMP1206A 3.10 ± 0.10 (.122 ± .004) 1.60 ± 0.10 (.063 ± .004) 0.50 ± 0.25 (.020 ± .010) 0.50 ± 0.25 (.020 ± .010) 0.55 ± 0.10 (.022 ± .004) CMP2010A 5.00 ± 0.20 (.197 ± .008) 2.50 ± 0.20 (.098 ± .008) 0.65 ± 0.25 (.026 ± .010) 0.60 ± 0.25 (.023 ± .010) 0.60 ± 0.10 (.024 ± .004) CMP2512A 6.40 ± 0.20 (.252 ± .008) 3.10 ± 0.20 (.122 ± .008) 0.60 ± 0.25 (.024 ± .010) 1.80 ± 0.25 (.071 ± .010) 0.60 ± 0.15 (.024 ± .006) DIMENSIONS: L W L MM (INCHES) C C C C D D D W T T D L Recommended Solder Pad Layout Model A B L CMP0603A 0.90 (.035) 1.00 (.039) 3.00 (.118) CMP0805A 1.30 (.051) 1.15 (.045) 3.50 (.138) CMP1206A 1.80 (.071) 1.30 (.051) 4.70 (.185) CMP2010A 3.00 (.118) 1.50 (.059) 6.80 (.268) CMP2512A 3.70 (.146) 2.45 (.096) 7.60 (.299) L A A B B DIMENSIONS: MM (INCHES) Surge Performance Peak Power (Watts) 1000 100 10 CMP2512A CMP2010A CMP1206A CMP0805A CMP0603A 1 0.1 0.0001 0.001 0.01 0.1 1 Pulse Duration (Seconds) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP-A Series High Power Anti-Surge Chip Resistors Construction Environmental Characteristics OVERCOAT (BLACK) Moisture Sensitivity Level�����������������������������������������������������������1 CONDUCTOR Derating Curve RESISTIVE ELEMENT Power Ratio (%) Sn PLATING Ni PLATING CERAMIC SUBSTRATE Rated Voltage The rated voltage is calculated by the following formula: 100 -55 V= P X R V: Rated Voltage (V) P: Rated Power (W) R: Resistance Value (W) 70 155 Ambient Temperature (°C) Soldering Profile 275 Maximum of 20 seconds between +255 °C and +260 °C 260 °C peak 255 °C 225 Temperature (°C) 220 °C 190 °C 90 - 150 seconds 175 Ramp Down 6 °C/second 150 °C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 200 250 300 Time (seconds) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP-A Series High Power Anti-Surge Chip Resistors How to Order CMP 0603 A F X - 1002 E LF Model CMP = High Power Anti-Surge Resistor Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size 2010 = 2010 Size 2512 = 2512 Size Feature A = AEC-Q200 Compliant Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) W = ±200 PPM/°C X = ±100 PPM/°C Resistance Value 1 % Tolerance: