CMP1206-FX-1004ELF

S CO LO & MP LI GE AN N T FR EE oH HA *R Applications n Power rating up to 1.5 watts @ 70 °C n Digital meters n High power surge withstanding n Consumer electronics n RoHS compliant* n LED lighting n Halogen free** n Industry control boards n Thick film technology 301 n Power supplies PL IA NT ** Features *R oH S CO M CMP Series High Power Anti-Surge Chip Resistors Electrical Characteristics Power Rating @ 70 °C FR EE Model CMP0805 CMP1206 CMP2010 CMP2512 0.25 W 0.5 W 0.75 W 1W 1.5 W AD CMP0603 LE Characteristic Operating Temperature Range -55 °C to +155 °C Derated to Zero Load at +155 °C 75 V 200 V 250 V 200 V 300 V Maximum Overload Voltage 125 V 300 V 500 V 400 V 600 V Resistance Tolerance Temperature Coefficient 10 Ω to 1 MΩ (±1 %, E24 & E96 Series) 10 Ω to 1 MΩ (±5 %, E24 Series Ro VER LEA HS SI D F CO ON RE M SA E PL R IA E NT * Maximum Working Voltage ±1 %, ±5 % ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±100 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C ±200 ppm/°C Note: Solder pad and trace size should be evaluated and board surface temperature should not exceed +105 °C when applying full rated power. Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2015/863, Mar 31, 2015 and Annex. ** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP Series High Power Anti-Surge Chip Resistors Product Dimensions Model L W C D T CMP0603 1.60 ± 0.10 (.063 ± .004) 0.80 ± 0.10 (.031 ± .004) 0.30 ± 0.20 (.012 ± .008) 0.30 ± 0.20 (.012 ± .008) 0.45 ± 0.10 (.018 ± .004) CMP0805 2.00 ± 0.10 (.079 ± .004) 1.25 ± 0.10 (.049 ± .004) 0.40 ± 0.20 (.016 ± .008) 0.40 ± 0.20 (.016 ± .008) 0.50 ± 0.10 (.020 ± .004) CMP1206 3.10 ± 0.10 (.122 ± .004) 1.60 ± 0.10 (.063 ± .004) 0.50 ± 0.25 (.020 ± .010) 0.50 ± 0.25 (.020 ± .010) 0.55 ± 0.10 (.022 ± .004) CMP2010 5.00 ± 0.20 (.197 ± .008) 2.50 ± 0.20 (.098 ± .008) 0.65 ± 0.25 (.026 ± .010) 0.60 ± 0.25 (.023 ± .010) 0.60 ± 0.10 (.024 ± .004) CMP2512 6.40 ± 0.20 (.252 ± .008) 3.10 ± 0.20 (.122 ± .008) 0.60 ± 0.25 (.024 ± .010) 1.80 ± 0.25 (.071 ± .010) 0.60 ± 0.15 (.024 ± .006) DIMENSIONS: L W L MM (INCHES) C C C C D D D W T T D L Recommended Solder Pad Layout Model A B L CMP0603 0.90 (.035) 1.00 (.039) 3.00 (.118) CMP0805 1.30 (.051) 1.15 (.045) 3.50 (.138) CMP1206 1.80 (.071) 1.30 (.051) 4.70 (.185) CMP2010 3.00 (.118) 1.50 (.059) 6.80 (.268) CMP2512 3.70 (.146) 2.45 (.096) 7.60 (.299) L A A B B DIMENSIONS: MM (INCHES) Surge Performance Peak Power (Watts) 1000 100 10 CMP2512 CMP2010 CMP1206 CMP0805 CMP0603 1 0.1 0.0001 0.001 0.01 0.1 1 Pulse Duration (Seconds) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP Series High Power Anti-Surge Chip Resistors Construction Environmental Characteristics OVERCOAT (BLACK) Moisture Sensitivity Level�����������������������������������������������������������1 CONDUCTOR Derating Curve RESISTIVE ELEMENT Power Ratio (%) Sn PLATING Ni PLATING CERAMIC SUBSTRATE Rated Voltage The rated voltage is calculated by the following formula: V= P X R 100 -55 70 155 Ambient Temperature (°C) V: Rated Voltage (V) P: Rated Power (W) R: Resistance Value (W) Soldering Profile 275 Maximum of 20 seconds between +255 °C and +260 °C 260 °C peak 255 °C 225 Temperature (°C) 220 °C 190 °C 90 - 150 seconds 175 Ramp Down 6 °C/second 150 °C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 200 250 300 Time (seconds) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP Series High Power Anti-Surge Chip Resistors How to Order CMP 0603 - F X - 1002 E LF Model CMP = High Power Anti-Surge Resistor Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size 2010 = 2010 Size 2512 = 2512 Size Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) W = ±200 PPM/°C X = ±100 PPM/°C Resistance Value 1 % Tolerance: 25 °C (2-3 min.)--> 155 °C (30 min.) --> 25 °C (2~3 min.) 1 % Tolerance ≤ ± (0.5 % + 0.05 Ω) 5 % Tolerance ≤ ± (1 % + 0.05 Ω) Load Life 1.5 hours at rated voltage followed by a pause of 0.5 hour at 70 ± 2 °C; Cycle repeated for 1000 hours 1 % Tolerance ≤ ± (1 % + 0.05 Ω) 5 % Tolerance ≤ ± (3 % + 0.05 Ω) Load Life with Humidity 40 ±2 °C with 90~95 % relative humidity; DC rated voltage for 1.5 hours “ON”, 0.5 hour “OFF”; Cycle repeated for 1000 hours 1 % Tolerance ≤ ± (1 % + 0.05 Ω) 5 % Tolerance ≤ ± (3 % + 0.05 Ω) Resistance to Solder Heat 260 ±5 °C for 10 ±1 seconds 1 % Tolerance ≤ ± (0.5 % + 0.05 Ω) 5 % Tolerance ≤ ± (1 %) + 0.05 Ω Solderability After immersing flux, dip in 245 ±2 °C molten solder bath for 3 ± 0.5 seconds At least 95 % of termination must be covered with solder.. Board Flex Bending 2 mm 1 % Tolerance ≤ ± (0.5 % + 0.05 Ω) 5 % Tolerance ≤ ± (1 % + 0.05 Ω) Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP Series High Power Anti-Surge Chip Resistors Typical Part Marking ±5 % (E24): 301 301 301 301 CMP0603, CMP0805, CMP1206, CMP2010, CMP2512 Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 301 = 30 x 101 = 300 ohms ±1 % (E24/E96): CMP0805, CMP1206, CMP2010, CMP2512 1542 1542 1542 1542 Resistance value is expressed by 4 digits. The first three digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. Example: 1542 = 154 x 102 = 15.4K ohms ±1 % (E24): CMP0603 Example: 222 = 22 x 102 = 2.2K ohms 222 222 222 222 Resistance value is expressed by 3 digits. The first two digits represent the significant figures of the nominal resistance value in ohms; the third digit represents the exponent for a base of 10. ±1 %01B (E96): 01B CMP0603 Resistance value is expressed by 2 digits followed by an alpha character multiplier. (Refer to marking table below.) Example: 01B = 100 x 101 = 1K ohms 01B 01B This table shows the first two digits for the three-digit E96 part marking scheme. The third character is a letter multiplier: A=100 B=101 C=102 D=103 E=104 F=105 G=106 H=107 X=10-1 Y=10-2 Z=10-3 Code R Value Code R Value Code R Value Code R Value Code R Value 01 100 21 162 41 261 61 422 81 681 02 102 22 165 42 267 62 432 82 698 03 105 23 169 43 274 63 442 83 715 04 107 24 174 44 280 64 453 84 732 05 110 25 178 45 287 65 464 85 750 06 113 26 182 46 294 66 475 86 768 07 115 27 187 47 301 67 487 87 787 08 118 28 191 48 309 68 499 88 806 09 121 29 196 49 316 69 511 89 825 10 124 30 200 50 324 70 523 90 845 11 127 31 205 51 332 71 536 91 866 12 130 32 210 52 340 72 549 92 887 13 133 33 215 53 348 73 562 93 909 14 137 34 221 54 357 74 576 94 931 15 140 35 226 55 365 75 590 95 953 16 143 36 232 56 374 76 604 96 976 17 147 37 237 57 383 77 619 18 150 38 243 58 392 78 634 19 154 39 249 59 402 79 649 20 158 40 255 60 412 80 665 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CMP Series High Power Anti-Surge Chip Resistors Packaging Dimensions (Conforms to EIA RS-481A) 14.9 (.587) MAX. 16.7 CMP2010, CMP2512: (.657) MAX. CMP0603, CMP0805, CMP1206: 2.00 ± 0.05 (.079 ± .002) 4.00 ± 0.10 (.157 ± .004) 1.50 +0.10/-0 DIA. (.059 +.004/-0) 2.0 ± 0.5 (.079 ± .020) 1.75 ± 0.10 (.069 ± .004) 13.0 ± 0.5 (.512 ± .020) W 60.0 ± 0.5 (2.36 ± .020) F B 4.00 ± 0.10 (.157 ± .004) A Model Tape Type MIN. Pieces per Reel 20 (.787) CMP0603, CMP0805, CMP1206: 10.0 ± 1.5 (.394 ± .059) CMP2010, CMP2512: 13.8 ± 1.5 (.543 ± .059) A B 1.10 ± 0.20 (.043 ± .008) 1.90 ± 0.20 (.075 ± .008) 1.65 ± 0.20 (.065 ± .008) 2.40 ± 0.20 (.094 ± .008) CMP1206 2.00 ± 0.20 (.079 ± .008) 3.60 ± 0.20 (.142 ± .008) CMP2010 2.80 ± 0.20 (.110 ± .008) 5.50 ± 0.20 (.216 ± .008) 3.50 ± 0.20 (.138 ± .008) 6.70 ± 0.20 (.264 ± .008) CMP0603 CMP0805 Paper Plastic CMP2512 5,000 4,000 DIMENSIONS: 178.0 ± 2.0 (7.008 ± .080) W F 8.00 ± 0.30 (.315 ± .012) 3.50 ± 0.05 (.138 ± .020) 12.00 ± 0.30 (.472 ± .012) 5.50 ± 0.05 (.217 ± .020) MM (INCHES) REV. 05/26/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R