CR0402-FX-1000GLF.

PL IA N T Features CO M ■ Small package dimensions ■ Suitable for most types of soldering processes *R oH S ■ RoHS compliant* ■ Standard packaging on paper tape and reel ■ Power rating at 70 °C = 1/16 W ■ Tight dimensional tolerances ■ Three layer termination process with nickel barrier prevents leaching and provides excellent solderability CR0402 - Chip Resistor Derating Curve 100 Rated Power (%) Electrical Characteristics Power Rating @ 70 °C ................1/16 W Operating Temperature Range ................................-55 °C to +155 °C Derated to 0 Load at ..................+155 °C Maximum Working Voltage ..............50 V Maximum Overload Voltage ..........100 V Resistance Range 1 %, E-96 and E-24...... 10 ohms to 10 megohms 5 %, E-24 ........ 1 ohm to 20 megohms Zero Ohm Jumper ............ 100 V 100 V IEC60115-1-4.6 ≥1 GΩ *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CR0402 - Chip Resistor Soldering Profile for RoHS Compliant Chip Resistors and Arrays 275 Maximum of 20 seconds between 260 °C peak +255 °C and +260 °C 255 °C 225 Temperature (°C) 220 °C 190 °C 175 60 - 90 seconds Ramp Down 6 °C/second 150 °C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 Time (seconds) 200 250 300 Packaging Dimensions (Conforms to EIA RS-481A) 1.0 ± 0.2 (.040 ± .020) 1.5 + 0.1/-0 DIA. (0.059 + 0.004/-0) 0.45 ± 0.1 (0.018 ± 0.004) 4.0 ± 0.1 (0.157 ± 0.004) 1.75 ± 0.1 (0.069 ± 0.004) 0.65 ± 0.1 (0.026 ± 0.004) 1.15 ± 0.1 (0.045 ± 0.004) 2.0 (.080) 13.0 ± 0.5 (.512 ± .020) 3.5 ± 0.05 (0.138 ± 0.002) 80.0 ± 1.0 (3.150 ± .040) 8.0 ± 0.2 (0.315 ± 0.008) 2.0 ± 0.1 (0.079 ± 0.004) Paper (Punched) 20.5 (.807) 178.0 ± 2.0 (7.008 ± .080) Direction of Feeding DIMENSIONS: MM (INCHES) 10.0 ± 1.5 (.394 ± .059) Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. CR0402 - Chip Resistor How to Order CR 0402 - F X - 8252 G LF Model (CR = Chip Resistor) Size • 0402 Resistance Tolerance F = ±1 % ..............Used with “X” TCR code only for values from 10 ohms through 1 megohm; and Used with “W” TCR code only for values above 1 megohm. through 10 megohms. J = ±5 % ............... Used with “W” TCR code for values from 10 ohms through 10 megohms; Used with “Z” TCR code for values above 10 megohms through 20 megohms; Used with “/” TCR code for zero ohm (jumper); and for values from 1 ohm through 9.1 ohms. TCR (ppm/°C) X = ±100 W = ±200 Z = ±400 / = -200 to +500 Resistance Value For 1 % Tolerance: