CR0402-FX-2703GPF

CO M G E & PL I AN N FR T* EE ** Features Click these links for more information: HS ■ Green technology LO ■ High reliability and stability HA Ro Additional Information ■ Ultra-low lead (Pb) content* 10 ■ Thick film paste on high grade ceramic 2 substrate ■ RoHS compliant** without exemptions ■ Halogen free*** PRODUCT TECHNICAL INVENTORY SAMPLES SELECTOR LIBRARY CONTACT CR-PF Series Ultra-Low Lead Content Thick Film Resistor Electrical Characteristics Characteristic Power Rating @ 70 °C Operating Temperature Range Derated to Zero Load at Maximum Working Voltage Maximum Overload Voltage Resistance Range (±1 %, E24 + E96 Series) CR0402-PF 0.0625 W 50 V 100 V 1 Ω ≤ R ≤ 9.76 Ω -200 to +500 PPM/°C 10 Ω ≤ R < 100 Ω ±200 PPM/°C 100 Ω ≤ R ≤ 1 MΩ ±100 PPM/°C Model CR0603-PF CR0805-PF 0.10 W 0.125 W -55 °C to +155 °C +155 °C 75 V 150 V 150 V 300 V 1 Ω ≤ R ≤ 9.76 Ω ±400 PPM/°C 10 Ω ≤ R ≤ 1 MΩ ±100 PPM/°C -- Zero Ohm Jumper ≤ 0.05 Ω Rated/Maximum Current 200 V 400 V -- -- 1 MΩ < R ≤ 10 MΩ ±200 PPM/°C 1 Ω ≤ R ≤ 9.1 Ω ±400 PPM/°C 10 Ω ≤ R ≤ 10 MΩ ±200 PPM/°C 1 Ω ≤ R ≤ 9.1 Ω -200 to +500 PPM/°C Resistance Range (±5 %, E24 Series) CR1206-PF 0.25 W 1 A / 2.5 A 2A/5A For Standard Values Used in Capacitors, Inductors and Resistors, click here. Product Dimensions Model L W C d L t CR0402-PF 1.00 ± 0.10 0.50 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 0.32 ± 0.05 (0.039 ± 0.004) (0.020 ± 0.002) (0.008 ± 0.004) (0.010 ± 0.004) (0.013 ± 0.002) CR0603-PF 1.60 ± 0.10 0.80 ± 0.05 0.30 ± 0.20 0.30 ± 0.20 0.45 ± 0.10 (0.063 ± 0.004) (0.031 ± 0.002) (0.012 ± 0.008) (0.012 ± 0.008) (0.018 ± 0.04) CR0805-PF 2.00 ± 0.10 1.25 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 0.50 ± 0.10 (0.079 ± 0.004) (0.049 ± 0.004) (0.016 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.004) CR1206-PF 3.10 ± 0.10 1.55 ± 0.10 0.50 ± 0.30 0.40 ± 0.20 0.55 ± 0.10 (0.122 ± 0.004) (0.061 ± 0.004) (0.020 ± 0.012) (0.016 ± 0.008) (0.022 ± 0.004) DIMENSIONS: MM (INCHES) W C C d d t Recommended Solder Pad Layout Model a b c CR0402-PF 0.5 ~ 0.6 (0.020 ~ 0.024) 1.4 ~ 1.6 (0.055 ~ 0.063) 0.4 ~ 0.6 (0.016 ~ 0.024) CR0603-PF 0.7 ~ 0.9 (0.028 ~ 0.035) 2.0 ~ 2.2 (0.079 ~ 0.087) 0.8 ~ 1.0 (0.031 ~ 0.039) CR0805-PF 1.0 ~ 1.4 (0.039 ~ 0.055) 3.2 ~ 3.8 (0.126 ~ 0.150) 0.9 ~ 1.4 (0.035 ~ 0.055) CR1206-PF 2.0 ~ 2.4 (0.079 ~ 0.094) 4.4 ~ 5.0 (0.173 ~ 0.197) 1.2 ~ 1.8 (0.047 ~ 0.071) WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov * Such products may contain trace amounts of lead of less than 100 ppm. ** RoHS Directive 2015/863, Mar 31, 2015 and Annex. RESISTOR c a b DIMENSIONS: MM (INCHES) *** Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; (c) the total Bromine (Br) & Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. Applications ■ General purpose ■ Consumer ■ Industrial ■ Telecommunications ■ Computer technology CR-PF Series Ultra-Low Lead Content Thick Film Resistor Construction Environmental Characteristics OVERCOAT (BLACK) Moisture Sensitivity Level ...........................................................1 Storage Conditions Temperature ................................................... +5 °C ~ +35 °C Humidity ............................................................ 40 % ~ 75 % Shelf Life...................................2 years from manufacturing date Solder Recommendations ......................................Reflow profile (Solder: Sn96.5 / Ag3 / Cu05) CONDUCTOR Sn PLATING RESISTIVE ELEMENT Ni PLATING CERAMIC SUBSTRATE Derating Curve Rated Voltage Power Ratio (%) The rated voltage is calculated by the following formula: V= P X R 70 100 V: Rated Voltage (V) P: Rated Power (W) R: Resistance Value (Ω) 80 60 40 155 20 0 -55 20 40 60 80 100 120 140 160 Ambient Temperature (°C) Solder Reflow Recommendations tp TP Solder Profile CRITICAL ZONE T L TO TP RAMP-UP TL Temperature tL TS MAX. RAMP-DOWN TS MIN. ts PREHEAT 25 °C 8 MINUTES MAX. t 25 *C TO PEAK Time Process Description Materials Temperature Lead Free Assembly Average ramp-up rate (Tsmax to Tp) 3 °C / second max. Preheat: - Temperature Min. (Tsmin) - Temperature Max. (Tsmax) - Time (Tsmin to Tsmax) (ts) 150 °C 200 °C 60~150 seconds Time maintained above: - Temperature (TL) - Time (TL) 217 °C 60~120 seconds Peak Temperature (Tp) 260 °C Time within +0/-5 °C of actual Peak Temperature (Tp)2 10 seconds Ramp-down rate 6 °C / second max. Time 25 °C to Peak Temperature 8 minutes max. Time Interval Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CR-PF Series Ultra-Low Lead Content Thick Film Resistor How to Order CR 0402 - F X - 1003 G PF Model CR = Thick Film Fixed Resistor Chip Size 0402 = 0402 Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) W = ±200 PPM/°C X = ±100 PPM/°C / = Used for zero ohm (jumper) and values from 1 ohm through 9.1 ohms Resistance Value 1 % Tolerance: