CR2512-FX-56R0ELF

PL IA N T Features M ■ RoHS compliant* ■ Suitable for most types of soldering *R oH S CO ■ Power rating at 70 °C: CR2010 - 1/2 W, CR2512 - 1 W ■ Tight tolerances of bottom electrode width ■ Three layer termination process with nickel barrier prevents leaching and provides excellent solderability 222 processes ■ Standard packaging on tape and reel ■ AEC-Q200 approval upon request CR2010/CR2512 - Chip Resistors Derating Curve Characteristic Power Rating @ 70 °C Operating Temperature Range Derated to 0 Load at Maximum Working Voltage Maximum Overload Voltage Resistance Range: 1 % E-96 + E-24 Model Model CR2010 CR2512 1/2 W 1W -55 °C to +155 °C +155 °C 200 V 400 V 100 Rated Power (%) Electrical Characteristics 80 60 40 20 0 -55 10 ohms ≤ R ≤ 1M ohms ±100 PPM/°C 1M ohms < R ≤ 10M ohms ±200 PPM/°C 10 ohms ≤ R ≤ 10M ohms ±200 PPM/°C 1 ohm ≤ R < 10 ohms 10M ohms < R ≤ 20M ohms ±400 PPM/°C Resistance Range: 5 % E-24 Zero Ohm Jumper 500 V IEC60115-1-4.6 ≥1 GΩ *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CR2010/CR2512 - Chip Resistors How to Order CR 2010 - F X - 8252 E LF Model (CR = Chip Resistor) Size • 2010 • 2512 Resistance Tolerance F = ±1 % .............. Use with “X” TCR code only for values from 10 ohms through 1 megohm; Use with “W” TCR code only for values from 1 megohm through 10 megohms J = ±5 % .................Use with “W” TCR code for values from 10 ohms through 10 megohms; Use with “Z” TCR code for values above 10 megohms through 20 megohms; Use with “/” TCR code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. TCR (ppm/°C) X = ±100 W = ±200 Z = ±400 / = Used with “J” Resistance Tolerance code for zero ohm (jumper) and values from 1 ohm through 9.1 ohms. Resistance Value For 1 % Tolerance: