CRF0805-FX-R005ELF

& *R AE oH C- S C Q2 O 00 MP Q LI UA AN LI T FI ED R02 5 Features Applications n Resistance value as low as 0.001 ohm n Power supplies n High power density n Stepper motor drives n Inductance less than 5 nH n Input amplifiers n RoHS compliant* AP *Ro PR HS OV C ED OM (S PL el IAN ec T t M od el s) n AEC-Q200 qualified, automotive grade CRF Series - High Power Current Sense Chip Resistor AE C Electrical Characteristics Rating CRF0805 CRF1206 0.5 W 1W Power Rating @ 70 °C Operating Temperature Range Derated to Zero Load at Maximum Working Voltage Resistance Resistance Tolerance Temperature Coefficient 0.003 ~ 0.020 Ω ±100 PPM/°C -55 °C to +170 °C +170 °C (P x R)1/2 0.001 ~ 0.030 Ω 1 %, ±5 % (0.001 Ω) (0.002 to 0.010 Ω) (>0.010 Ω) CRF2512 (0.001 to 0.010 Ω) 2 W (0.011 to 0.050 Ω) 1 W 0.001 ~ 0.050 Ω ±275 PPM/°C ±100 PPM/°C ±75 PPM/°C Performance Characteristics Test Thermal Shock Short Time Overload Low Temperature Storage High Temperature Exposure Bias Humidity Mechanical Shock Vibration Load Life Resistance to Solder Heat Moisture Resistance Conditions -55 ˚C to +150 ˚C, 300 Cycles, 15 minutes 5 X Rated Power for 5 seconds -55 ˚C for 1000 hours 1000 hours @ + 170 ˚C + 85 ˚C, 85 % RH, 10 % Bias, 1000 hours 100 g for 6 milliseconds, 5 pulses Frequency varied 10-2000 KHz in one minute, 3 directions, 12 hours 1000 hours at rated power at +70 ˚C, 1.5 hours on, 0.5 hours off +260 ˚C, 10-12 second dwell, 25 mm/second emergence MIL-STD-202 Method 106, 0 % power (7a and 7b not required) CRF0805 Specification CRF1206 CRF2512 ΔR < ± 1 % ΔR < ± 0.5 % ΔR < ± 0.5 % ΔR < ± 0.5 % ΔR < ± 1 % ΔR < ± 0.5 % ΔR < ± 0.5 % ΔR < ± 0.5 % N/A ΔR < ± 1 % N/A ΔR < ± 0.5 % N/A ΔR < ± 0.5 % ΔR < ± 1 % ΔR < ± 1 % ΔR < ± 0.5 % ΔR < ± 0.5 % ΔR < ± 0.5 % ΔR < ± 0.5 % *RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications.  CRF Series - High Power Current Sense Chip Resistor Product Dimensions A Dim. A B B C C C C CRF0805 A T C C C C 6.40 ± 0.20 (0.252 ± 0.008) 0.40 ± 0.20 (0.016 ± 0.008) 0.50 ± 0.30 (0.0197 ± 0.012) 0.95 ± 0.30 (0.037 ± 0.012) 1.65 ± 0.20 (0.064 ± 0.008) 0.60 ± 0.20 (0.024 ± 0.008) T CRF2512 3.20 ± 0.20 (0.126 ± 0.008) 1.25 ± 0.10 (0.049 ± 0.004) B C T CRF1206 2.0 ± 0.10 (0.079 ± 0.004) 3.20 ± 0.20 (0.126 ± 0.008) 0.60 ± 0.20 (0.024 ± 0.008) 0.60 ± 0.20 (0.024 ± 0.008) DIMENSIONS: MM (INCHES) Recommended Solder Pad Layout L Dim. B A CRF0805 SENSING TRACE CRF2512 0.003 ~ 0.020 Ω 0.001 Ω 1.4 (0.055) 1.8 (0.070) 1.8 (0.070) 4.0 (0.157) 4.0 (0.157) 1.2 (0.047) 1.0 (0.039) 1.6 (0.062) 1.3 (0.051) 4.1 (0.161) A B Cu TRACE CRF1206 L 1.15 (0.045) 2.3 (0.090) 0.002 ~ 0.030 Ω 0.001 ~ 0.003 Ω 0.004 ~ 0.050 Ω 1.7 (0.066) 3.1 (0.122) 2.1 (0.083) DIMENSIONS: Construction MM (INCHES) Overcoat Resistance Value Tables Ni / Sn Plating Metal Alloy Plate Power Ratio (%) Derating Curve CRF0805 CRF2512 (1W) Code R Value Code R Value R003 0.003 R009 0.009 R004 0.004 R010 0.010 R005 0.005 R020 0.020 R009 0.009 Code R Value Code R Value R011 0.011 R030 0.030 R012 0.012 R033 0.033 R015 0.015 R035 0.035 R018 0.018 R040 0.040 R020 0.020 R050 0.050 R025 0.025 CRF1206 100 -55 70 170 Ambient Temperature (°C) Code R Value Code R Value R001 0.001 R010 0.010 R002 0.002 R012 0.012 3L50 0.0035 R014 0.014 R004 0.004 R015 0.015 R005 0.005 R020 0.020 R006 0.006 R022 0.022 R007 0.007 R025 0.025 R008 0.008 R030 0.030 R009 0.009 CRF2512 (2W) Code R Value Code R Value R001 0.001 R006 0.006 R002 0.002 R007 0.007 R003 0.003 R008 0.008 R004 0.004 R010 0.010 R005 0.005 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. EMBOSSED TAPE 1.75 ± 0.1 (0.069 ± 0.004) 5.5 ± 0.05 (0.217 ± 0.002) 1.5 (0.059) DIA. MIN. 1.5 +0.1/-0 DIA. (0.059 +0.004/-0) TOP TAPE 12.0 ± 0.2 (0.472 ± 0.008) 6.9 ± 0.2 (0.272 ± 0.008) 4.0 ± 0.05 (0.157 ± 0.002) RESISTOR 3.60 ± 0.20 (0.142 ± 0.008) 0.85 ± 0.15 (0.033 ± 0.006) CRF Series - High Power Current Sense Chip Resistor 2.0 ± 0.05 (0.079 ± 0.002) 4.0 ± 0.1 (0.157 ± 0.004) USER DIRECTION OF FEED Packaging Dimensions (Conforms to EIA RS-481A) EMBOSSED TAPE TOP TAPE 1.5 (0.059) DIA. MIN. D0 DIA. 13.0 ± 1.0 (0.512 ± 0.039) DIA. E 180 +0/-3 (7.09 +0/-0.118) DIA. F 60.0 (2.362) MIN. DIA. W RESISTOR A P1 t P2 P0 B USER DIRECTION OF FEED DIMENSIONS: Model Paper Tape CRF0805 Paper Tape CRF1206 Embossed Tape CRF2512 A B F E P1 P2 P0 D0 t 3.5 ± 0.05 (0.138 ± 0.002) 1.75 ± 0.10 (0.069 ± 0.004) 4.0 ± 0.10 (0.157 ± 0.004) 2.0 ± 0.1 (0.079 ± 0.004) 4.0 ± 0.1 (0.157 ± 0.004) 1.5+0.1/-0 (0.059+0.004/-0) 0.84 ± 0.10 (0.033 ± 0.004) 13.0 ± 1.08.0 ± 0.20 2.0 ± 0.15 3.6 ± 0.20 (0.079 ± 0.006) (0.142 ±(0.512 0.008) ± 0.039) (0.315 ± 0.008) DIA. 3.60 ± 0.20 6.9 ± 0.20 12.0 ± 0.20 (0.142 ± 0.008) (0.272 ± 0.008) (0.472 ± 0.008) 3.5 ± 0.05 (0.138 ± 0.002) 1.75 ± 0.10 (0.069 ± 0.004) 4.0 ± 0.10 (0.157 ± 0.004) 2.0 ± 0.05 (0.079 ± 0.002) 4.0 ± 0.05 (0.157 ± 0.002) 1.5+0.1/-0 (0.059+0.004/-0) 0.85 ± 0.15 (0.033 ± 0.006) How to Order W 13.0 ± 1.0 (0.512 ± 0.039) 1.6 ± 0.15 2.4 ± 0.20 8.0 ± 0.20 (0.063 ± 0.006) (0.094 ± 0.008) (0.315 ± 0.008) 5.5 ± 0.05 1.75 ± 0.10 4.0 ± 0.10 2.0 ± 0.05 2.0 ± 0.05 1.5+0.1/-0 0.85 ± 0.15 +0/-3 (0.069 ± 0.004) (0.157 ± 0.004) (0.079 ± 0.002) (0.079 ± 0.002) (0.059+0.004/-0) (0.033 ± 0.006) (0.217 180 ± 0.002) (7.09 +0/-0.118) DIA. 60.0 (2.362) Soldering Profile MIN. DIA. Can be soldered in accordance with IPC/JEDEC-J-STD-020. CRF 0805 - F X - R020 E LF Model (CRF = Precision Chip Resistor) 15.4 ± 2.0 Size (0.606 ± 0.079) 0805 = 0805 Size 13.0 ± 1.0 1206 = 1206 Size* (0.512 ± 0.039) 2512 = 2512 Size Resistance Tolerance • F = ±1 % • J = ±5 % TCR (PPM/°C) • Z = ±75 PPM/°C (>0.010 ohm) • X = ±100 PPM/°C (0.002 ohm ~ 0.010 ohm & Model CRF 0805 only) • V = ±275 PPM/°C (0.001 ohm) Resistance Value Code (See Resistance Value Tables) Packaging • E = 5,000 pcs./180 mm (7-inch) reel (CRF0805 & CRF1206) or 4,000 pcs./180 mm (7-inch) reel (CRF2512) Termination • LF = Tin-plated (RoHS compliant) 275 Maximum of 20 seconds between +255 °C and +260 °C 260 °C peak 255 °C 225 220 °C Temperature (°C) Packing 15.4 ± 2.0 (0.606 ± 0.079) MM (INCHES) 190 °C 175 90 - 150 seconds Ramp Down 6 °C/second 150 °C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 Time (seconds) * Model CRF1206-xZ-3L50 = ±50 PPM/°C. REV. 10/27/16 Specifications are subject to change without notice. The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time. Users should verify actual device performance in their specific applications. 200 250 300