CRS2512AJW-102ELF

*R o AE **H HS C- AL CO Q2 OG M 00 EN PL CO FR IAN M EE T, PL & IA NT Features Applications n Power rating up to 2 watts at 70 °C n Stepper motor drives n Thick film technology n Power supplies n High power surge withstanding n Sulfur-resistant design (ASTM B-809) n RoHS compliant* and halogen free** FR EE n AEC-Q200 compliant CRS-A Series High Power Anti-Surge Resistor LE AD Electrical Characteristics Characteristic Model CRS0805A 50 V 100 V 150 V 300 V ±200 PPM/°C ±150 PPM/°C* ±100 PPM/°C 10 ohms to 1 megohm (±1 %, E24 & E96 Series) ±100 PPM/°C ±100 PPM/°C ±100 PPM/°C 1 ohm to 1 megohm (±5 %, E24 Series) ±200 PPM/°C ±200 PPM/°C ±200 PPM/°C Power Rating @ 70 °C Operating Temperature Range Derated to Zero Load at Maximum Working Voltage Maximum Overload Voltage Resistance Tolerance Temperature Coefficient 1 ohm to 9.76 ohms (±1 %, E24 & E96 Series) Ro VER LEA HS SI D F CO ON RE M SA E PL R IA E NT * CRS0603A 0.125 W * TCR code assigned as “X”; see How to Order. 0.25 W CRS1206A CRS1210A 0.5 W 0.5 W -55 °C to +155 °C +155 °C 200 V 200 V 400 V 400 V ±1 %, ±5 % CRS2010A CRS2512A 200 V 400 V 300 V 600 V 1W 2W For Standard Values Used in Capacitors, Inductors and Resistors, click here. Product Dimensions Model L W C D T CRS0603A 1.60 ± 0.10 0.80 ± 0.10 0.30 ± 0.20 0.30 ± 0.20 0.45 ± 0.10 (0.063 ± 0.004) (0.031 ± 0.004) (0.012 ± 0.008) (0.012 ± 0.008) (0.018 ± 0.04) CRS0805A 2.00 ± 0.10 1.25 ± 0.10 0.40 ± 0.20 0.40 ± 0.20 0.50 ± 0.10 (0.079 ± 0.004) (0.049 ± 0.004) (0.016 ± 0.008) (0.016 ± 0.008) (0.020 ± 0.04) CRS1206A 3.10 ± 0.10 1.60 ± 0.10 0.50 ± 0.25 0.50 ± 0.25 0.55 ± 0.10 (0.122 ± 0.004) (0.063 ± 0.004) (0.020 ± 0.010) (0.020 ± 0.010) (0.022 ± 0.004) CRS1210A 3.10 ± 0.10 2.60 ± 0.10 0.50 ± 0.25 0.50 ± 0.25 0.55 ± 0.10 (0.122 ± 0.004) (0.102 ± 0.004) (0.020 ± 0.010) (0.020 ± 0.010) (0.022 ± 0.004) CRS2010A 5.00 ± 0.20 2.50 ± 0.20 0.65 ± 0.25 0.60 ± 0.25 0.60 ± 0.10 (0.197 ± 0.008) (0.098 ± 0.008) (0.026 ± 0.010) (0.024 ± 0.010) (0.024 ± 0.004) CRS2512A 6.40 ± 0.20 3.10 ± 0.20 0.60 ± 0.25 1.80 ± 0.25 0.60 ± 0.15 (0.252 ± 0.008) (0.122 ± 0.008) (0.024 ± 0.010) (0.071 ± 0.010) (0.024 ± 0.006) L W T C D DIMENSIONS: MM (INCHES) Recommended Solder Pad Layout Model A B L CRS0603A 0.90 1.00 3.00 (0.035) (0.039) (0.118) CRS0805A 1.30 1.15 3.50 (0.051) (0.045) (0.138) 1.80 1.30 4.70 CRS1206A (0.071) (0.051) (0.185) Model A B 3.00 1.30 CRS1210A (0.118) (0.051) CRS2010A 3.00 1.50 (0.118) (0.059) L 4.70 (0.185) 6.80 (0.268) CRS2512A 3.70 2.45 7.60 (0.032) (0.096) (0.299) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov L B A Cu TRACE SENSING TRACE * RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  CRS-A Series High Power Anti-Surge Resistor How to Order CRS 0603 A F X - 1002 E LF Model (CRS = High Power Anti-Surge Resistor) Size 0603 = 0603 Size 0805 = 0805 Size 1206 = 1206 Size 1210 = 1210 Size 2010 = 2010 Size 2512 = 2512 Size Feature A = AEC-Q200 Compliant Resistance Tolerance F = ±1 % J = ±5 % TCR (See Electrical Characteristics chart) • W = ±200 PPM/°C • X = ±100 PPM/°C NOTE: CRS0805A 0.5%, 1 ohm to 9.76 ohms: 150 PPM/°C Resistance Value • 1 % Tolerance: