CRT0805-FZ-1001ELF

T PL IA N M CO *R oH S 01C Features Applications ■ Ultra-tight tolerance ■ Current sense ■ Wide resistance range ■ Precision circuits ■ RoHS compliant* ■ Medical equipment** ■ Four package sizes available ■ Printers ■ Automation equipment ■ Navigation equipment CRT Series - Thin Film Precision Chip Resistors Electrical Characteristics Model CRT0402 1/16 watt Characteristic Power Rating @ 70 °C Operating Temperature Range Derated to Zero Load at Maximum Working Voltage Maximum Overload Voltage Resistance Range (E-96 + E-24 Values) Model CRT0603 1/10 watt -55 to +155 °C +155 °C 75 V 150 V 25 V 50 V Model CRT0805 1/8 watt Model CRT1206 1/4 watt 150 V 300 V 200 V 400 V (See Standard Values Table) Temperature Coefficient of Resistance (TCR) 2 to 50 PPM/°C (See Value - TCR Table on Page 2) Environmental Characteristics Specification 2.5 x Max. Operating Voltage for 5 seconds 1000 Hours at Rated Power Method 103B Method 107 Method 208H Method 210E CRT 0603 - C V - 1003 E LF Model (CRT = Thin Film Precision Chip Resistor Size 0402 0603 0805 1206 Resistance Tolerance F = ±1 % B = ±0.1 % D = ±0.5 % A = ±0.05 % C = ±0.25 % P = ±0.01 % TCR (PPM/°C) Z = ±50 V = ±5 Y = ±25 U = ±3 X = ±15 T = ±2 W = ±10 Resistance Value 0.05 %) ±0.2 % ±0.2 % ±0.3 % ±0.3 % ±0.05 % ±0.2 % Derating Curve How to Order Rated power in percentage (%) Short Time Overload Load Life Humidity (Steady State) Thermal Shock Solderability Resistance to Soldering Heat Test (MIL STD 202) 100 80 60 40 20 0 -55 0 70 155 (°C) Ambient temperature *RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns® products have not been specifically designed and tested for FDA Class III applications and their use in such applications is neither recommended nor supported. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. CRT Series - Thin Film Precision Chip Resistors Value - TCR Table TCR Model CRT0402 CRT0603 CRT0805 CRT1206 (PPM/°C) (Code) ±2 ±3 ±5 ±10 ±15 ±25 ±50 ±2 ±3 ±5 ±10 ±15 ±25 ±50 ±2 ±3 ±5 ±10 ±15 ±25 ±50 ±2 ±3 ±5 ±10 ±15 ±25 ±50 (T) (U) (V) (W) (X) (Y) (Z) (T) (U) (V) (W) (X) (Y) (Z) (T) (U) (V) (W) (X) (Y) (Z) (T) (U) (V) (W) (X) (Y) (Z) ±0.01 % (P) ±0.05 % (A) Resistance Tolerance (Code) ±0.1 % ±0.25 % (B) (C) ±0.5 % (D) 49.9 to 4.99K Ω N/A 49.9 to 4.99K Ω 49.9 to 12K Ω ±1 % (F) 49.9 to 60K Ω 49.9 to 69.8K Ω 10 to 255K Ω 4.7 to 511K Ω 24.9 to 15K Ω N/A 24.9 to 15K Ω 4.7 to 332K Ω 24.9 to 100K Ω 4.7 to 332K Ω 4.7 to 1M Ω 24.9 to 30K Ω N/A 24.9 to 30K Ω 24.9 to 200K Ω 4.7 to 511K Ω 4.7 to 1M Ω 4.7 to 511K Ω 4.7 to 1M Ω 1 to 1M Ω*** 24.9 to 49.9K Ω N/A 24.9 to 49.9K Ω 24.9 to 499K Ω 4.7 to 1M Ω*** ***Select part numbers listed below are not available: CRT0805-DZ-1504ELF, CRT1206-CY-1R00ELF, CRT1206-DZ-1R74ELF, CRT1206-DZ-2004ELF Chip Dimensions Dimension Model CRT0402 Model CRT0603 Model CRT0805 Model CRT1206 L 1.00 ± 0.10 (0.040 ± 0.004) 1.55 ± 0.10 (0.061 ± 0.004) 2.00 ± 0.15 (0.079 ± 0.006) 3.05 ± 0.15 (0.120 ± 0.006) W 0.50 ± 0.05 (0.020 ± 0.002) 0.80 ± 0.10 (0.031 ± 0.004) 1.25 ± 0.15 (0.049 ± 0.006) 1.55 ± 0.15 (0.061 ± 0.006) H 0.30 ± 0.05 (0.012 ± 0.002) 0.45 ± 0.15 (0.018 ± 0.006) 0.55 ± 0.10 (0.022 ± 0.004) 0.55 ± 0.10 (0.022 ± 0.004) I1 0.20 ± 0.10 (0.008 ± 0.004) 0.30 ± 0.20 (0.012 ± 0.008) 0.30 ± 0.20 (0.012 ± 0.008) 0.42 ± 0.20 (0.017 ± 0.008) I2 0.20 ± 0.10 (0.008 ± 0.004) 0.30 ± 0.20 (0.012 ± 0.008) 0.40 ± 0.25 (0.016 ± 0.010) 0.35 ± 0.25 (0.014 ± 0.010) I1 I1 H I2 I2 W L DIMENSIONS: MM (INCHES) Recommended Land Pattern Dimension A B C Model CRT0402 0.50 (0.020) 0.50 (0.020) 0.60 ± 0.20 (0.024 ± 0.008) Model CRT0603 0.80 (0.031) 1.00 (0.039) 0.90 ± 0.20 (0.035 ± 0.008) Model CRT0805 1.00 (0.039) 1.00 (0.039) 1.35 ± 0.20 (0.053 ± 0.008) Model CRT1206 2.00 (0.079) 1.15 (0.045) 1.70 ± 0.20 (0.067 ± 0.008) C B A Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. CRT Series - Thin Film Precision Chip Resistors Soldering Profile 275 Maximum of 20 seconds between 260 °C peak +255 °C and +260 °C 255 °C 225 Temperature (°C) 220 °C 190 °C 175 60 - 90 seconds Ramp Down 6 °C/second 150 °C 125 60 - 120 seconds 10 seconds minimum 75 Ramp Up 3 °C/second maximum 25 0 50 100 150 Time (seconds) 200 250 300 Packaging Dimensions - Tape Dimension Model CRT0402 Model CRT0603 Model CRT0805 Model CRT1206 A 1.16 ± 0.05 (0.046 ± 0.002) 1.90 ± 0.05 (0.075 ±0.002) 2.37 ± 0.05 (0.094 ± 0.002) 3.55 ± 0.05 (0.140 ± 0.002) B 0.70 ± 0.05 (0.028 ± 0.002) 1.10 ± 0.05 (0.043 ± 0.002) 1.60 ± 0.05 (0.063 ± 0.002) 2.00 ± 0.05 (0.079 ± 0.002) C 2.00 ± 0.05 (0.079 ± 0.002) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 4.00 ± 0.10 (0.157 ± 0.004) 11.5 ± 1.0 (.453 ± .039) C 2.0 ± 0.05 (.079 ± .002) B A 3.5 ± 0.05 (.138 ± .002) 2.0 (.080) 8.0 ± 0.2 (.315 ± .008) 4.0 ± 0.1 (.157 ± .004) 1.55 ± 0.05 (.061 ± .002) 13.5 ± 0.7 (.531 ± .028) 60.0 ± 0.5 (2.36 ± .020) 1.75 ± 0.1 (.059 ± .004) DIMENSIONS: MM (INCHES) 20.5 (.807) 178.0 ± 2.0 (7.008 ± .080) 9.5 ± 1.0 (.374 ± .039) REV. 03/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and P[ZHɉSPH[LZJVSSLJ[P]LS`¸)V\YUZ¹ Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change ^P[OV\[UV[PJL