CSS2H-3920K-3L00FE

*R o AE **H HS C- AL CO Q2 OG M 00 EN PL CO FR IAN M EE T, PL & IA NT Features n EB welded metal strip n Very high power n Excellent long term stability 0R 392 1 % 0 L30 45 n Low resistance, low TCR n Low thermal EMF 17 n RoHS compliant* and halogen free** LE AD FR EE n AEC-Q200 compliant Model CSS2H-3920 Series Current Sense Resistor Electrical Characteristics Model CSS2H-3920 Series < 0.2 mW / 160 A CSS2H-3920C-0003 CSS2H-3920R-L200x 0.2 mW / 12 W / 5 W CSS2H-3920R-L300x 0.3 mW / 10 W / 5 W CSS2H-3920R-L500x 0.5 mW / 9 W / 5 W CSS2H-3920R-L700x 0.7 mW / 8 W / 5 W CSS2H-3920R-1L00x 1.0 mW / 8 W / 5 W CSS2H-3920K-2L00x 2.0 mW / 6 W / 4 W CSS2H-3920K-2L50x 2.5 mW / 5 W / 3.5 W CSS2H-3920K-3L00x 3.0 mW / 5 W / 3 W CSS2H-3920K-4L00x 4.0 mW / 4 W / 2.5 W CSS2H-3920K-5L00x 5.0 mW / 3 W / 2 W -55 to +170 °C ±50 PPM/°C (20~60 °C) CSS2H-3920R-L200x CSS2H-3920R-L300x CSS2H-3920R-L500x ±100 PPM/°C CSS2H-3920R-L700x CSS2H-3920R-1L00x CSS2H-3920K-2L00x CSS2H-3920K-2L50x CSS2H-3920K-3L00x ±75 PPM/°C CSS2H-3920K-4L00x CSS2H-3920K-5L00x < 3 nH ±1 %, ±5 % Ro VER LEA HS SI D F CO ON RE M SA E PL R IA E NT * Characteristic How to Order Resistance Range / Power Rating @70 °C1 / Power Rating @130 °C1 Operating Temperature Range TCR - Resistive Alloy 2 Temperature Coefficient including Copper Terminals Inductance Resistance Tolerance 1 Terminal temperature 2 For full TCR range, refer to TCR curve 3 Tinned copper CSS 2H - 3920 R - 1L00 F __ Model No. of Terminals & Style Size Material Type (See Part Number Table) Resistance Code (milliohms) “L” represents decimal point (examples: L500 = .500 milliohms; 1L00 = 1.00 milliohms) Resistance Tolerance F = ±1 % J = ±5 % Packaging size Blank = Standard 13 ” reel E = Mini 7 ” reel Typical Part Marking SIZE MATERIAL TYPE MANUFACTURER’S TRADEMARK 3920R 1L00 1% 1930 RESISTANCE CODE IN MILLIOHMS: “L” = DECIMAL POINT DATE CODE: YYWW RESISTANCE TOLERANCE: F=1% J=5% Environmental Characteristics Characteristic Thermal Shock Short Time Overload Resistance to Soldering Heat High Temperature Exposure Low Temperature Storage Biased Humidity Test Moisture Resistance Mechanical Shock Vibration, High Frequency Load Life Solderability ESD Board Flex Moisture Sensitivity Level WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov Test Condition DR Max. +260 °C / 10 Seconds +170 °C / 2000 Hours -65 °C / 24 Hours +85 °C, 85 %R.H., 1000 Hours 10 Days with Cold Shock, No Load 100 g, 6 ms half sine 20 g, 10-2000 Hz 2000 Hours, Max. Load, Terminal Temperature 130 °C J-STD-002 AEC-Q200-002, 25 kV 60 Sec. Min. Holding Time 0.50 % 1.00 % 0.10 % 0.50 % 0.20 % 0.20 % 0.20 % 1.00 % 95 % Coverage Min. 0.25 % 0.25 % Level 1 -55 to +150 °C / 2000 Cycles 5 Times Rated Power for 5 Second Duration 0.50 % 0.50 % * RoHS Directive 2015/863, Mar 31, 2015 and Annex. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. RESISTIVE MATERIAL BASE MATERIAL COPPER ALLOY C10200 2.00 +0.50/-0.90 (0.079 +0.020/-0.035) Y H± 0.50 ± 0.20 (0.020 ± 0.008) 0.10 (0.004) OPTIONAL TRIMMING AREA 2 PLCS. Model CSS2H-3920 Series Current Sense Resistor 5.20 +0.30/-0.20 3.00 +0.20/-0.30 (0.205 +0.012/-0.008) (0.118 +0.007/-0.011) Product Dimensions 1.14 +0.20/-0.50 (0.045 +0.007/-0.019) RESISTIVE MATERIAL 2.00 +0.50/-0.90 (0.079 +0.020/-0.035) RESISTIVE MATERIAL Dimension H Part Number BASE MATERIAL COPPER ALLOY C10200 10.00 ± 0.30 (0.394 ± 0.012) H± Y 0.50 ± 0.20 (0.020 ± 0.008) 0.10 (0.004) Y 5.20 +0.30/-0.20 0.10 (0.205 +0.012/-0.008) H± (0.004) 0.50 ± 0.20 (0.020 ± 0.008) 3.05 ± 0.20 (0.120 ± 0.007) OPTIONAL TRIMMING AREA 2 PLCS. 10.00 ± 0.30 (0.394 ± 0.012) DIMENSIONS: 0.35 ± 0.20 CSS2H-3920R-L300x 1.80 (0.071) 2 PLCS. (0.039) Cu-Mn CSS2H-3920R-L500x 1.27 (0.050) 0.60 (0.024) Cu-Mn CSS2H-3920R-L700x 1.02 (0.040) CSS2H-3920R-1L00x 0.92 (0.036) CSS2H-3920K-2L00x 1.18 (0.046) IA 6.35 ± 0.15 (0.250 ± 0.005)1.04 CSS2H-3920K-2L50x MM (INCHES) CSS2H-3920K-3L00x 11.00 SENSE TERMINALS CSS2H-3920K-4L00x 10.00 ± 0.30 (0.394 ± 0.012) SOLDER PADS Cu-Mn IB SOLDER PADS Fe-Cr 0.96 (0.038) Fe-Cr Fe-Cr SENSE TERMINALS Fe-Cr 1.80 (0.07) 8.40 (0.331) SOLDER PADS Fe-Cr 0.42 (0.017) (0.041) 0.92 (0.036) AREA 2.70 Cu-Mn (0.106) Recommended Measurements 2.70 (0.106) SENSE TERMINALS 1.00 TRIMMING OPTIONAL SENSE TERMINALS (0.433) CSS2H-3920K-5L00x Recommended Pad Layout Cu/Tin Cu-Mn 6.20 (0.244) 5.20 +0.30/-0.20 (0.205 +0.012/-0.008) 0.42 (0.017) 2.50 1.20 (0.014 ± 0.007) (0.098) (0.047) 0.10 H ±CSS2H-3920R-L200x (0.004) RESISTIVE MATERIAL OPTIONAL TRIMMING AREA BASE MATERIAL 2 PLCS. COPPER ALLOY C10200 2.00 +0.50/-0.90 (0.079 +0.020/-0.035) Y 0.92 (0.036) CSS2H-3920C-000 Y BASE MATERIAL Dimension COPPER ALLOY C10200 Alloy PROBES 6.20 (0.244) IA IB 3.40 (0.13) 2.70 (0.106) IA IA IB SOLDER PADS 11.00 (0.433) 6.20 (0.244) 2.60 (0.102) 1.30 (0.051) 4.20 (0.165) IB 3.40 (0.134) Electrical Schematic 11.00 (0.433) 8.40 (0.331) I2 PROBES I2 R1 R1 I1I1 2.60 (0.102) 8.40 (0.331) 5.36 (0.211) 1.30 PROBES (0.051) 4.20 Specifications are subject to change without notice. PROBES (0.165) Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 2.60 (0.102) 1.53  Model -CSS2H-3920 Current Sense Resistor 3312 2 mm SMDSeries Trimming Potentiometer TCR Curves R-Type Resistive Material K-Type Resistive Material 2.0 1.0 0.8 1.5 0.6 0.4 0.5 dR/R25 (%) dR/R25 (%) 1.0 0 -0.5 -1.0 0 -0.2 -0.4 Material Chart ±100 PPM TCR -1.5 0.2 Material Chart ±50 PPM TCR -0.6 -0.8 -2.0 -55 -30 -5 20 45 70 95 120 145 -1.0 170 -55 -30 -5 K-Type Resistive Material 70 95 120 145 170 120 140 145 160 170 180 160 180 2.0 0.8 1.5 0.6 1.0 0.2 0 -0.2 -0.4 -1.5 -0.8 -55 -30 -5 20 45 0 -0.5 -1.0 Material Chart ±50 PPM TCR -0.6 0.5 Power Ratio (%) dR/R25 (%) 0.4 dR/R25 (%) 45 R-Type Resistive Material 1.0 -1.0 20 Temperature (°C) Temperature (°C) 70 95 120 145 170 -2.0 Temperature (°C) 120 70 °C 100 80 60 Material Chart ±100 PPM TCR 40 20 -55 0 0 -30 20 -5 40 20 45 70 80 (°C)100 60 Temperature 95 120 Terminal Temperature (°C) Power Derating Curves @70 °C Power Ratio (%) Power Ratio (%) 70 °C 100 80 60 40 20 0 20 40 60 80 100 120 140 Terminal Temperature (°C) 160 180 130 °C 100 80 60 40 20 0 0 @130 °C 120 120 0 20 40 60 80 100 120 140 Terminal Temperature (°C) Power Ratio (%) 120 100 130 °C Specifications 80 are subject to change without notice. Users should verify actual device performance in their specific applications. The products60described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. 40 20  Model -CSS2H-3920 Current Sense Resistor 3312 2 mm SMDSeries Trimming Potentiometer Maximum Pulse Power Maximum Pulse Energy 10000 10000 1000 1000 Power(W) (W) Power 0.2mΩ mΩ 0.2 100 100 Power (Watts) Power (Watts) Energy (Joules) Energy (Joules) 1000 1000 Power(W) (W) Power mΩ 2 2mΩ 100 100 Energy(J)(J) Energy 0.2mΩ mΩ 0.2 Energy(J)(J) Energy mΩ 2 2mΩ 1010 11 0.1 0.1 1010 0.01 0.01 11 0.00001 0.0001 0.0001 0.00001 0.001 0.001 0.01 0.01 0.1 0.1 11 1010 100 100 0.001 0.001 0.00001 0.0001 0.0001 0.00001 PulseWidth Width(Seconds) (Seconds) Pulse 0.001 0.001 0.01 0.01 0.1 0.1 11 1010 100 100 PulseWidth Width(Seconds) (Seconds) Pulse Packaging Specifications 0.25 (0.010) Components packaged on plastic tape & reel per EIA-481. Standard Reel Size: 13 inches Tape Width: 16 mm Quantity: 3,000 pcs. per reel 3920R 1L00 1% 1930 3920R 1L00 1% 1930 7 inches 16 mm 1000 pcs. per reel 3920R 1L00 1% 1930 Mini-Reel Size: Tape Width: Quantity: COMPONENT ORIENTATION 0.61 (0.024) TOP COVER TAPE MATTE FINISH EMBOSSED CARRIER DIMENSIONS: MM (INCHES) Asia-Pacific: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com EMEA: Tel: +36 88 885 877 • Email: eurocus@bourns.com The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com www.bourns.com REV. 06/20 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R