CW100505-2N7D

T PL IA N M CO *R oH S Features Applications ■ 0402 miniature size ■ RF modules ■ Ceramic core provides stable electrical ■ Cellular phones characteristics High Q High self-resonant frequency Flat top surface for automated assembly RoHS compliant* and halogen free** ■ ■ ■ ■ ■ GPS receivers ■ Wireless PDAs, LANs ■ CATV filters, tuners ■ Cable modems, set-top boxes CW100505 Series High Q Ceramic Chip Inductors Electrical Specifications General Specifications Inductance Bourns Part No. ® Q Test Freq. (MHz) SRF (MHz) L (nH) Tol. Min. L/Q Min. 1.0 ±0.3 nH 13 250 6000 CW100505-1N0D DCR (Ohms) Irms (mA) 0.045 1360 Max. CW100505-2N2D 2.2 ±0.3 nH 18 250 6000 0.070 960 CW100505-2N7D 2.7 ±0.3 nH 16 250 6000 0.120 640 CW100505-3N3J 3.3 ±5 % 20 250 6000 0.066 840 CW100505-3N9J 3.9 ±5 % 20 250 5800 0.066 840 CW100505-4N7J 4.7 ±5 % 15 250 4775 0.130 640 CW100505-5N6J 5.6 ±5 % 23 250 5800 0.083 760 CW100505-6N8J 6.8 ±5 % 20 250 4800 0.083 680 CW100505-8N2J 8.2 ±5 % 25 250 4400 0.104 680 CW100505-10NJ 10.0 ±5 % 23 250 3900 0.195 480 CW100505-12NJ 12.0 ±5 % 26 250 3600 0.120 640 CW100505-15NJ 15.0 ±5 % 26 250 3280 0.172 560 CW100505-18NJ 18.0 ±5 % 25 250 3100 0.230 420 CW100505-22NJ 22.0 ±5 % 25 250 2800 0.300 400 CW100505-27NJ 27.0 ±5 % 26 250 2480 0.298 400 CW100505-33NJ 33.0 ±5 % 24 250 2350 0.350 400 CW100505-39NJ 39.0 ±5 % 25 250 2100 0.550 320 CW100505-47NJ 47.0 ±5 % 26 200 2100 0.830 210 CW100505-56NJ 56.0 ±5 % 22 200 1760 0.970 200 CW100505-68NJ 68.0 ±5 % 22 200 1620 1.120 180 CW100505-82NJ 82.0 ±5 % 20 150 1500 1.250 150 CW100505-R10J 100.0 ±5 % 20 150 1300 2.520 120 CW100505-R12J 120.0 ±5 % 20 150 1100 2.660 110 Soldering Profile Preheat Area - - 150~200 °C / 60~120 Sec. Reflow Area 20~ 40 °C/ Sec. Max. Core ...........................................Ceramic Wire ............Enameled copper (Class H) Terminal ...........................Mo/Mn+Ni+Au Packaging .... 10,000 pcs. per 7-inch reel Product Dimensions 0.50 ± 0.1 (.020 ± .004) 0.30 (.012) 1.00 ± 0.1 (.039 ± .004) 0.55 ± 0.1 (.022 ± .004) 0.20 (.008) 0.50 (.020) Forced Cooling Area - -1~5 °C/Sec. Max. PEAK TEMP. 260 °C 250 Temperature (°C) Materials 0.20 (.008) Temperature Rising Area 4 °C/ Sec. Max. Operating Temperature ................................-55 °C to +125 °C (Temperature rise included) Storage Temperature ................................-55 °C to +125 °C Resistance to Soldering Heat .......................... +260 °C, 5 sec. max. Temperature Rise .....15 °C at rated Irms 230 °C - Recommended Layout 0.50 (.020) 0.50 (.020) 50 SECONDS MAX. 200 150 0.40 (.016) 0.40 (.016) 70 SECONDS MAX. 100 DIMENSIONS: 50 MM (INCHES) Schematic 0 50 100 150 200 250 Time (Seconds) WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov * RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011. **Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less; (b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf CW100505 Series High Q Ceramic Chip Inductors Q vs. Frequency 100 120 80 100 80 60 60 -5N6J -27NJ -12NJ -27NJ 40 -1N0D -12NJ -5N6J -1N0D 20 Q (nH) L (nH) L vs. Frequency 40 20 0 1 10 1000 100 10000 Frequency (MHz) 0 1 10 100 1000 10000 Frequency (MHz) Packaging Specifications 178 DIA. (7.008) 2.0 ± 0.5 (.079 ± .020) 12.5 (.492) 13.0 (.512) DIA. 21.0 ± 0.8 (.827 ± .031) 50.0 -0 (1.969 -0) 13.0 DIA. (.512) 10.0 +0 (.394 +0) 2 (.079) END 4 (.157) START NO COMPONENT 200 (7.874) MIN. NO COMPONENT COMPONENTS USER DIRECTION OF FEED 10,000 PCS. PER REEL DIMENSIONS: MM (INCHES) 400 (15.748) MIN. Asia-Pacific: Tel: +886-2 2562-4117 • Fax: +886-2 2562-4116 Europe: Tel: +41-41 768 5555 • Fax: +41-41 768 5510 The Americas: Tel: +1-951 781-5500 • Fax: +1-951 781-5700 www.bourns.com REV. 08/13 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.  Legal Disclaimer Notice This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining applications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifies Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 05/17/18R